| | |
|
| |
| | |
|
|
HM-4G6-Z-42: Walkera RX2610S Receiver With 3-Axis Gyro, Replacement & Upgrade for 4G6S/4G6 & Nouvs 125 CP
|
|
Out of stock
Part Number: HM-4G6-Z-42
Manufacturer: Walkera
Manufacturer Part No: HM-4G6-Z-42
|
Price reflects the extended time of customer support sometimes required for certain customers on the installation of this item.
Upgrade your V120D02 flybarless to fly hardcore 3D by switching to the RX2610S.
Includes Walkera instruction and Wow Hobbies' step by step installation instruction which is not available anywhere else. Warning! It would be extremely difficult and tricky to setup this receiver without the 2 instructions as the Walkera instruction is very hard to follow. Due to the complexity of this receiver setup the Wow Hobbies' step by step instructions will provide you a trouble free upgrade to the 3 axis gyro system.
Newest 4G6S 3-axis video
The following Tx settings used on this video are complements of Manuel Campos. The settings are for the super advanced pilots only. The motor used is the upgraded Turbo Ace 31714 which are sold separately. The settings are for your reference point use only.
Under GyrPat settings are
PLT -124 ATS 0%
Pit +500 SEN 23%
Exp1 0
Exp2 0
The throttle curve is very aggressive in stunt modes as soon as you leave center stick pitch comes in really quick so under Stick put it in 2801 mode then at Throttle curve and these are the ST-1 settings. After the settings are done set Stick mode back to 2601.
ST-1 0 38 50 62 100
This will change your pitch curve in ST-1 in 2601 mode to make it less aggressive.
Now on the on the RX if you look at it down from the front of the heli it is set up like this.
Bal Delay is set to 8:30
Elev gyro 11:30
Aile gyro 12:30
Elev/Aile EXT is maxed out.
Super stable 3 axis gyro, automatically compensates any drifting on your helicopter/airplane. Binds in 2601 mode but not in 2801 mode in your WK2801PRO. Both the firmware version 2.2 and 2.3 in the WK2801PRO have been tested to work with this 3 axis receiver. The receiver has the on board servo extend and gyro adjustment for all 3 servos. For the beginner to the advanced pilots, it is rock stable enough even for FPV (First person view) piloting. This 3 axis gyro receiver can be used for many different types of RC upgrades and applications, including all your airplanes and helicopters. If you don't own a WK2801 programmable Walkera radio, it is time to add this radio to your collection. You will find that many people are converting their equipments to Walkera compatible instead of Spektrum compatible due to cost savings and more recent Walkera advanced technologies. Click on http://www.wowhobbies.com/wk-2801pro-walkera24ghzprogrammabletransmitterradioforallwalkera24ghzhelicopters.aspx
Go from easy to easier.
- Each gyro gain channel can be adjusted from Maximum to Minimum and can be completely turned off manually.
- Build-in aileron and elevator servo extend adjustments.
- Lays horizontally instead of the old vertical orientation layout on the helicopter frame for added stability.
See the 3 axis gyro in action and why it makes the helicopter so much easier to fly.
This is a drop in replacement for your 4G6. It is the receiver Walkera is shipping with their newest 4G6s 3 axis gyro helicopter.
|
|
|