Walkera Devention Genius CP-PRO RTF (2012 Ver) + Devo 10 Programmable Radio, Chrgr, 2 Batteries, Extra Main Blades & Tail Rotor, Now Shipping

<< Previous in WOW DEALS

Next in WOW DEALS >>

Price: Discontinued - Replace by Genius CP V2

Part Number: WKR-Genius-CP-PRO+Devo10++

Manufacturer: Walkera

Manufacturer Part No: WKR-Genius-CP-PRO+Devo10

Quantity:

Email this page to a friend

This version has been test flown outdoor by Manuel Campos in all-out 3D.

See video http://www.youtube.com/watch?v=WrC6TLOn25g

There are 4 types of Walkera Genius CP available as described below. To clarify some of the confusion out there, there is no Genuis CP that will work with both transmitters below. So you will have to choose one or the other. If you are ordering the brushless version shown below, it is a custom build one by Wow Hobbies with brushless CO5 and ESC with build-in converter. No more pain messing with pinion removal, installation and taking the risk of bending the motor shaft in the process. We have completed the entire brushless conversion for you and guarantee it to fly by the time you receive it.

1. Walkera Genius CP is compatible with the WK2801-Pro and WK2602/3 transmitters

2. Walkera Genius Brushless CP is compatible with the WK2801-Pro and WK2602/3 transmitters

3. Devention Genuis CP is compatible with the Devo transmitters

4. Devention Genuis Brushless CP is compatible with the Devo transmitters

Features:

Crash and hands-free take off. No other helicopter is capable of taking off without a helping hand after a crash
Ultra micro 3D flybarless helicopter, weight up 35g
First inner 6-Axis gyro micro 3D flybarless helicopter
Adopting composite material greatly increases durability
Extra power and extremely stable

Genius CP Specification:

Main rotor dia.: 241mm
Tail rotor dia.: 45mm
Overall length: 220mm
Gyro: 6-axis
All-up weight: 41g(battery included)
Receiver: RX2625H
Battery: 3.7V 200mAh Li-Po
Main brush motor: 0820R
Tail brush motor: 0615R
Servo: wk-02-4; weight: 2.42g; speed: 0.12sec/60°(3.0~4.5V); dimension: 16.5*6.8*15.7mm
Dimension: 220*38*78mm
Includes charger

End your constant stress and worry about low battery and protect your RC heli/airplane investment. This transmitter can receive the telemetry voltage data on board the aircraft wirelessly and the vibration alarm can be set to trigger at the voltage you defined. There is no way to miss a low voltage warning and you will never crash because you lost track of the battery power. The vibration alarm will remain on when the total voltage falls below what you set. You no longer need a battery meter and you no longer need to check your battery before each flight, the voltage can also be clearly displayed on the transmitter LCD.

New Generation Devo 10 Telemetry 10 channel transmitter- More features than any high-end radios at 30% of the cost. Approved by Wow Hobbies with stringent test.
Devo 10 is the new generation of radio which incorporates the latest in technology, offering significant improvements over the traditional 2.4gHz radios. It features telemetry to monitor voltage/temperature on board the aircraft and a vibration alarm which can be set to trigger on user defined time, voltage and temperature. It includes many of the features not seen on transmitters which cost over $500, such as smooth servo travel control dials and 7-point curve adjustments.

Introduction video
http://www.youtube.com/watch?v=7bB0LVuxEig

http://www.youtube.com/watch?v=RTWxrQof6HQ

The Devo 10 radio comes with a high resolution LCD to display graphs like the WK2801-PRO. The backlit LCD screen is clearly visible under sunlight. The new generation features that replaces the traditional 2.4gHz radio are as follow:

Telemetry which displays voltage, temperature, RPM and GPS info from aircraft
7 point high resolution curve adjustments instead of the traditional 5 point
Easy to read extra large text
Vibration and/or buzz alarm set to trigger base on user defined time, voltage or temperature.
10 channels, including 2 channels with smooth servo travel control dials
Upgradable firmware online
30 model memory

For optional upgrade rechargeable Lipo battery for this transmitter go to
http://www.wowhobbies.com/transmitterbattery-lipo2220mah15cbattery.aspx

For telemetry to function, the optional telemetry module below is required for Devo compatible Walkera helicopters which are not equipped with this function. Walkera Mini CP and Ladybird already come with telemetry, therefore it is not required. Telemetry module together with Devo RX801, RX802 or RX1002 receiver, can also be installed on any brand of helicopter/airplane to work with Devo 6s, 8s, 10 and 12s transmitters. You can upgrade all your helicopters to telemetry including T-Rex 250, 450, 600, Walkera 1#A, Hiko, E-Flite Blades and helicopters larger than 180 size which can carry this module. Take advantage of the newest in RC technology, the optional telemetry module can be purchased below.
http://www.wowhobbies.com/walkera-telemetry-module.aspx

Specification

1). Encoder: ARM micro computer system
2). Frequency: 2.4Ghz（DSSS）
3). Output power:-5dBm~20dBm, long range 100mW power
4). Battery: 1.2VX4 NiCard or1.5V X 8 AA dry batteries

Features

1). Easy to see under sunlight backlit LCD screen
2). Telemetry with voltage, temperature, rpm and GPS data display
3). Vibration and/or buzz alarm which can be set to trigger on defined voltage, temperature and time
4). 2 Model Types: Helicopter and Airplane. Improved programming with more mixes and better interface.
5). 7-point throttle curve provides more resolution than the traditional 5-point curve.
6). 30 model memory.
7). Online update function:Enjoying updating the latest program and copy model setup data with ease.
8). User friendly menu access with throttle curve graph..

The package includes one extra main blade set, one extra tail rotor blade set, and an extra battery. Total of 2 main blades, 2 tail rotors and 2 batteries including the one on the helicopter.