If you own a WK2801, this receiver can also be used on fixed pitch helicopters, V120D01, airplanes or any Walkera helicopter with servo tail. Since this receiver is fully programmable, you will have adjustment to throttle curve, exponential and dual rate.

This unit charges 2-cell & 3-cell batteries and includes a charging cable adapter to balance charge three 1-cell Walkera batteries simultaneously. Other adapters will not provide a balanced charge on multiple 1-cell batteries. Batteries are not included.

This balance charging cable adapter is used on a 3-cell charger (HM-CB180-Z-32 or B6 Charger - not included) to balance & charge 3 separate 1-cell batteries simultaneously. Other adapters will not provide a balanced charge on multiple 1-cell batteries.

This motor awakens the Walkera V120D05 and the M120D01. This is a model TA215 with strict Wow Hobbies quality assurance, and compatible to the M120D01 and V120D05 stock ESC.

Not for stock Walkera heli. Manufactured by the same Linear battery factory, the 650mAh is now available using the same process and technology as the 400mAh Linear battery. It provides the greatest CG adjustment (1.2 inch) inside the Walkera battery cage.

This is a battery meter with built-in low voltage alarm can also be installed on board helicopters. At low voltages, a led will light up and the double buzzers will also sound a warning for pilots who are too far from the helicopter to prevent crashes.

Genuine Walkera brand. Made of tough aluminum panels on all 6 sides. Inside Dimensions: 97mm X 270mm X 520mm

Compatible with all Walkera and Novus 6 channel 2.4gHz helicopters

It's time to retire those old "AA" batteries. This is the smartest new solution to charge up your Walkera transmitter radio. No more guess work on 8 "AA" batteries with iffy connections in a tray. Everything is consolidated into one simple reliable unit.

This pitch scale is a wider design that measures +15 to -15 degrees Instead of the typical +12 to -12 degrees. Contrasting orange scale & deep blue pointer with a larger finger friendly low increment knob makes it easy to see and make minute adjustments.

Customized to fit on Walkera transmitters, this Xtreme neck strap stabilizer bracket realigns the Tx to an optimum operating and viewing angle to ease arm, wrist & hand strain associated with holding and controlling the transmitter sticks simultaneously.

3 sets of cutting edge Carbon Fiber Main Blades, designed for Walkera M120D01, V120D02/03/05, 4G6/S, 4G3 & Novus 125/CP helis, combine feather weight technology & carbon fiber strength to enhanced durability, ultra rigidity for extreme 3D performance.

Two of the same phillips screwdrivers for the micro Walkera helicopters size 000- Spindle handle, magnetic and hardened tip. Improved optimum tip angel for a better fit on micro screws. The choice Phillips #000 screwdriver for Wow Hobbies technicians.

Set of 2 Phillips screwdrivers for the micro Walkera helicopters size 000- Swivel handle, magnetic and hardened tip. Please visit our fast expanding Accessory & Tool section more more selections.

Of all the upgrades for the micro flybarless helis, this is a must have since this part is a lot stronger than stock.

The MHE-MH-V12D5193 pitch slider for V120D05 has a larger diameter hole than the MHE-MH-4G6193 & MHE-MH-4G6S193 pitch sliders for the 4G6/V120/M120 Series.

HM-4G3-Z-01: Official Main Rotor Blades are integrated from high density foam & urethane film for 4G3, V120D02/03, M120D01, 4G6/S & Novus CP/125 CP to optimize weight & stiffness. These blades can be easily balanced to offers unparalleled 3D performance.

HM-4G6-Z-01 Black Main Rotor Blades are integrated from high density foam & urethane film for 4G6/S, 4G3, V120D02/03, M120D01& Novus CP optimize weight & stiffness. These high tech blades can be easily balanced to offers unparalleled 3D performance.

HM-4G6-Z-01-Black X 5: Save on 5 pairs of high quality and feather weight main blades that are perfect for 3D flights. These cool blades minimize damages to 4G6/S, 4G3, V120D02/03, M120D01 & Novus CP/125 CP main rotor mechanism during crashes.

HM-4#3B-Z-29: Charger for all Walkera & Novus 1-cell helicopters. Chargers features convenient "plug in the wall outlet" with operation that will automatically shut-off when the battery is fully charged and the LED indicator turns from red to green.

Color is silver and it is the latest version, not black per photo.

Fits all 4mm applications and the Walkera 4G3, 4G6, 4G6S, 4#6, 4#6Bell, 4F200, 4F180, V120D01, V120D02, CB180, CB180Z, UFLYS, V200D01, V200D02, Novus 125 CP, Novus 125 FP and Novus CP main blade holding nut.

Radio transmitter hands free neck strap. Total length 45 inches.

Compatible to all the latest 3-Axis Walkera receivers such as RX2433, RX2435, RX2437S, RX2610S and Heli-Max Novus equivalents.... ETC.