
	Your cart is empty.


	Email Address:

Email Address:

Password:

You will be prompted to enter your password on the next page

Create an account
Forgot Password?

Walkera V120D03 Parts

Displaying products 1 - 97 of 97 results	Show:	Sort:

Turbo Ace Linear CG Battery 650mAh 2S (7.4V) 25C LiPo: For Upgraded Walkera 4G6S, 4#6S/BELL, V120D01/02/03/05 & M120D01, Devo7E Not for Stock WK Helis Price: $19.95 Quantity: Not for stock Walkera heli. Manufactured by the same Linear battery factory, the 650mAh is now available using the same process and technology as the 400mAh Linear battery. It provides the greatest CG adjustment (1.2 inch) inside the Walkera battery cage.	XP-12A-2 (VER 2) EBAY BL ESC 1-2 Cell. Increases head speed by 5%-8% and upgrades 1 & 2 Cell Helis (e.g. M120D01, V120D02/S/03/05/01, 4G6/S, 4#6/S) Retail: $34.95 Price: $19.95 You Save: $15.00 (43 %) Quantity: XP-12A-2 version 2 with improved firmware that gives outrunner 5-8% additional head speed (power boost). It wakes up the old HP08 and retains the same flight time. Includes Walkera battery, receiver and motor plugs installed. It is plug and play.	HM-M120D01-Z-01-92 Carbon Fiber Blades (Black): 140mm Carbon Fiber Main Rotor Blades for Walkera M120D01, V120D02/S/03/05, 4G6/S/4G3 & Novus CP/125 CP Retail: $14.99 Price: $8.95 You Save: $6.04 (40 %) Quantity: Designed for Walkera M120D01, V120D02/03/05, 4G6/S, 4G3 & Heli-Max Novus 125 CP & Novus CP helicopters, these cutting edge Carbon Fiber Main Blades, the perfect compliment for any micro CP helicopter, offers excellent performance and durability.	HM-V120D02-Z-01: Main Rotor Blades for Walkera V120D02/03, M120D01, 4G6/S, 4G3, Novus 125 CP & Novus CP Retail: $4.99 Price: $3.49 You Save: $1.50 (30 %) Quantity: Same specifications & dimensions applies to all stock blades shared by V120D02/03, M120D01, 4G6/S, 4G6, 4G3, Novus 125 CP, Novus CP with cosmetic difference. This is also the official main blades used on the new M120D01.
HM-V120D03-Z-13: RX2613V Receiver With 3-Axis Gyro For Walkera V120D03 Retail: $39.95 Price: $28.43 You Save: $11.52 (29 %) Quantity:	Turbo Ace Super Capacity Battery 650mAh 1S (3.7V) 20C LiPo (2-Pack): 15-20% More Output & Capacity for Peak Formance & Extended Flight Time Price: $14.95 Turbo Ace Super Capacity 650mAh Battery, designed to fit the Walkera 4G3/6/S, 4#6/S/BELL, CB100 & the V120 Series, will extend your flight time. Higher 20C high output increases power for more extreme maneuvers in both sport flying and 3D flight.	Turbo Ace Super Capacity Battery 650mAh 1S (3.7V) 20C LiPo: Walkera Connector, 15-20% More Output & Capacity for Peak Formance & Extended Flight Time Price: $7.95 Dimensions and micro connector fits 4#3/A/B/Q, 4G3/6/S, 4#6/S/Bell, CB100, V120D##, Novus CX/FP/CP. This little dynamo will bring new and exciting energy to your high performance Walkera helis with brushless motors & Turbo Hot Rod upgrades.	Balance Charger with 2-Cell, 3-Cell & 1-Cell Balance Charging Cable Adapter for Charging Three 1-Cell Batteries Simultaneously Price: $22.95 Quantity: This unit charges 2-cell & 3-cell batteries and includes a charging cable adapter to balance charge three 1-cell Walkera batteries simultaneously. Other adapters will not provide a balanced charge on multiple 1-cell batteries. Batteries are not included.
WWG-JH-MMM: Balance Charging Cable Adapter for Charging 3 Separate 1-Cell Walkera&Novus Batteries Simultaneously, for HM-CB180-Z-32-93 & B6 Charger Price: $4.95 Quantity: This balance charging cable adapter is used on a 3-cell charger (HM-CB180-Z-32 or B6 Charger - not included) to balance & charge 3 separate 1-cell batteries simultaneously. Other adapters will not provide a balanced charge on multiple 1-cell batteries.	Turbo Ace Dual Capacity 4G3 + CB100 Case: Heavy Gauge Aluminum, Fits 2 Helis + TX + Charger + Misc., also for V120D03, 4#3B/Q, Novus CP/FP & MSR: Price: $39.95 Quantity: This rugged Dual Turbo Ace Carrying Case provides ultimate protection for one V120D03/4G3 heli + one CB100/4#3B heli + Tx. Unlike typical aluminum cases, the Turbo Ace case is merticulously crafted from high gauge aluminum w/ a heavy duty handle.	Newest Phillips Micro Screwdriver: #000 Size Hardened Tip, Swivel Press Handle, Improved Optimum Tip Angle for a Better Fit on Micro Screws Price: $5.95 Quantity: One Phillips screwdriver for the micro Walkera helicopters size 000- Spindle handle and hardened tip. Improved optimum tip angel for a better fit on micro screws. The choice Phillips #000 screwdriver for Wow Hobbies technicians.	2.9g Brushless Motor Shim set for clip on version of the 2.9g BL Tail Motor to lock tight on Carbon Tail Stand/ Motor Holder Price: $1.95 Set of 3 metal shims (super thin paper-weight washers)- Includes one 0.1mm , one 0.2mm and one 0.3mm thick shim with 6mm bore diameter. 2.9g motor and carbon stand/holder shown on photo are not included.
Carbon Tail Stand/Holder w/ Red CNC Bracket: For 2.5g (Turbo Ace 25700) & 2.9g (Turbo Ace 29701) BL Motors, For V120D03, 4G3 & Novus CP Square Boom Price: $14.95 Quantity: C-Curved Carbon Fiber Tail Stand/Holder for Turbo Ace 25700 & 29701 (HP03) BL tail motors with red CNC Metal bracket that fits around V120D03, 4G3 & Novus CP square tail boom without risk of cracking it. Motor, tail boom and rotor are not included.	CopterX 110V CX-B3 LiPo Balance Charger w/Power Supply: for 2-Cell to 3-Cell Batteries Price: $19.95 Quantity:	Feather Wt. 2.5g Turbo Ace 25700 Dual Bearing BL Outrunner Motor + Carbon Tail Stand/Holder, Red CNC Bracket: For 4G3, V120D03 & Novus CP Square Boom Price: $27.95 Turbo Ace 25700 dual bearing BL out-runner motor & Carbon Fiber Tail Stand/Holder with red CNC Metal bracket to fit Walkera 4G3 and Novus CP square tail boom. You can glue-mount this motor in minutes and it's a super powerful & light weight design.	Training Gear Set: 4 Extended Legs For Walkera V120D01/02/03, 4G6/S, 4#6/S/BELL, Heli-Max Novus 125 CP/FP, Navy Blue Color Price: $6.95 Quantity: Use either 4 short or 4 long steel legs (both included) in this stabilizing and shock absorbing design to greatly reduce damages to your precious helicopter during pilot training. Total weight with 4 short legs: 4.4g, Total weight with 4 long legs: 6g
Turbo Ace 31714 Brushless Motor: 14T Brass Pinion Installed on a Power House Inrunner Motor for V120D03 & 4G3, Pinion is not spaced for 4G6 Price: $34.95 Quantity: The Turbo Ace Power House 31714 inrunner motor. This is a direct drop in plug and play motor for the 4G3. It generates an additional 400 RPM from stock motor running cool at 100% throttle. It is a taller engine at 25mm verses stock 22mm. Wt. only 13g	Turbo Ace 71318 Brushless Motor: WOW-07 (Formally named HP07-2), Lethal-Power upgrade replacement for the HP08-2 for 4G3, V120D03 Price: $42.95 Quantity: The all new Lethal-Power WOW-07 (formally named HP07-2) is here. It supersedes the 81220 in power and efficiency. It's custom to Wow Hobbies' specifications. Make sure that out-runner motor wires are soldered directly to ESC for consistent performance.	Turbo Ace Battery Meter: 16C Measures 1-6 Cell Lipo, Measures 2.8V-25.2V For All RC Helicopters Retail: $11.95 Price: $6.95 You Save: $5.00 (42 %) Quantity: You can effortlessly prolong battery life by frequently checking its voltage. Measuring 1-cell for Walkera/Novus and 3-6 cell for Trex450/600 helis, this one step plug & test meter is accurate and much easier to use than most cumbersome voltage meters.	Turbo Ace Dual Case V120 + MCPX: Heavy Gauge Alum, Fits 2 Helis + TX + Charger + Misc for V120D01/02/03/02S/05, MiniCP, Genius, SuperFP, and MCPX Price: $34.95 Quantity: This Dual Turbo Ace Carrying Case provides ultimate protection for one V120D02S + one Blade MCPX + Tx. Unlike typical aluminum cases, the Turbo Ace case is merticulously crafted from high gauge aluminum w/ a heavy duty handle.
Turbo Ace Lipo Battery Voltage Meter With Programmable Buzzer Alarm : Measures 1-6 Cell Lipo Batteries, 2.8V-25.2V, For All Helicopters Price: $9.95 Quantity: This is a battery meter with built-in low voltage alarm can also be installed on board helicopters. At low voltages, a led will light up and the double buzzers will also sound a warning for pilots who are too far from the helicopter to prevent crashes.	UNIVERSAL Dual Capacity Helicopter Case: Heavy Gauge Aluminum, Custom Cut-Out For One 250/300 + One Micro/Sub-Micro + Tx + Parts/Tools Price: $49.95 Quantity:	Walkera WK-2603 Transmitter (Defective): 2.4GHz, 4/6-Channel, Dual Rate & Height Limit Dial & Switches, for All Walkera & Novus CX, FP & CP Helis Price: $23.95 Quantity: This is a defective Walkera transmitters that may have screen or switch problems. You can use it as parts to repair your transmitter.	WK-2603 Walkera Transmitter: 2.4GHz, 4/6-Channel, Dual Rate & Height Limit Dial & Switches, For All Walkera & Novus CX, FP & CP Helis Price: $59.95 Quantity: Compatible with all Walkera and Novus 4 or 6 channel 2.4gHz helicopters
XP-12A (XP-12A-1) Version 1 EBAY BL ESC: Includes Walkera battery and receiver plugs but without motor plugs as shown on photo Price: $19.95 Quantity: Includes Walkera battery and receiver plugs installed. This is the higher current brother of the common XP-7A Ebay ESC. It works with 1-3s applications and it's used mostly on the brushless main motor conversion to start outrunner brushless motor easier.	XP-7A-2 EBAY BL 1-2 Cell ESC: Compatible to Outrunner Motors for Upgrading 1 & 2 Cell Helis (e.g. V120D02/03/01, 4G6/S, 4#6/S) + Liadon & Nataku) Price: $24.95 Quantity: This is a special edition XP-7A-2 programmable ESC made to compatibility spec to both the outrunners/ inrunners w/Anti-cog outrunner firmware. Plug & play w/ Walkera connectors. It is ideal for upgrading to the lighter outrunner motors.	XTM-EA-057: Balance Charging Cable Adapter for Charging 3 Separate 1-Cell Walkera & Novus Batteries Simultaneously for HM-CB180-Z-32-93 & B6 Chargers Price: $4.95 Quantity: This balance charging cable adapter is used on a 3-cell charger (HM-CB180-Z-32 or B6 Charger - not included) to balance & charge 3 separate 1-cell batteries simultaneously. Other adapters will not provide a balanced charge on multiple 1-cell batteries.	MG Power Transmitter Battery 2200mAh 3S Lipo: JST, For Walkera WK2401/2/3, WK2601/2/3, WK2801/Pro, Devo7,& 10 Price: $24.00 Quantity: It's time to retire those old "AA" batteries. This is the smartest new solution to charge up your Walkera transmitter radio. No more guess work on 8 "AA" batteries with iffy connections in a tray. Everything is consolidated into one simple reliable unit.
Turbo Ace 80814 2-Cell Brushless Motor:HP08-3 2S,14T Pinion,Exceptionally High Performance & Outrunner for V120D02/S/03, 4G6/S. 4#6/Bell & 4G3 Price: $44.95 Discontinued (Replaced by MT-HP08S-130X) Replaced by MT-HP08S-130X	WWC-TE-Mini-Digital-Protractor: Bevel Box, Angle Sensor Price: $39.97 Quantity:	XTM-EA-036-WKR: Xtreme Neck Strap Stabilizer for Walkera Transmitters, Realigns transmitter to comfortable handling & viewing position Price: $9.90 Quantity: Customized to fit on Walkera transmitters, this Xtreme neck strap stabilizer bracket realigns the Tx to an optimum operating and viewing angle to ease arm, wrist & hand strain associated with holding and controlling the transmitter sticks simultaneously.	XTM-EA-040-3: Swashplated Leveler (2mm Hole) for Walkera V120D02/03/05, M120D01, 4G3, 4G6, Novus 125CP, and Novus CP Price: $11.90 Quantity: Not for V120D02S which has a larger diameter shaft than the V120D02
ASC1596: Thread Locking Adhesive, Prevent Screws Coming Loose from Vibration, Blue Thread Lock for "Easy to See" Applicaton Price: $4.85 Quantity: It's a hard to find the right kind of Thread Locking Adhesive that works and dries quick. Worse yet, certain thread locks are hard to dry.	XTM-EA-038-G: Magnetic Blade Balancer, Golden Color (You need to buy a Blade Balancer Attachment that fits with your blade hole size. - Not Included) Price: $13.95 Quantity: Includes magnetic base, protective metal case only. This base requires a blade balancer attachment to be complete which is sold separately. Please make sure you get one that fit with the size of your blades.	XTM-EA-038-G+EA038-A-V2: Magnetic Blade Balancer (Gold Color) Including Attachment for Walkera 4G6/4#6/CB100/4#3B/4G3 & Other Micro Helicopters Price: $21.85 Includes 2 longer screws not available in older version Quantity: This complete set includes magnetic base, protective metal case and micro blade balancer attachment to balance main blades for micro and super micro helicopoter. Compatible for models from Walkera, E-flite, Align T-Rex 100, Novus, Nine Eagle and etc.	XTM-EA-038-S+EA038-A-V2: Magnetic Blade Balancer (Silver Color) Including Attachment for Walkera 4G6/4#6/CB100/4#3B/4G3 & Other Micro Helicopters Price: $21.85 Includes 2 longer screws not available in older version Quantity: This complete set includes magnetic base, protective metal case and micro blade balancer attachment to balance main blades for micro and super micro helicopoter. Compatible for models from Walkera, E-flite, Align T-Rex 100, Novus, Nine Eagle and etc.
950mAh 7.4V 25C with Red JST Plugs For Walkera Helicopters (Not for Stock Helicopter) Price: $15.90 Quantity:	HM-M120D01-Z-01-92 Carbon Fiber Blades (Black): 3 Pairs, 140mm Carbon Fiber Main Blades, for M120D01, V120D02/03/05, 4G6/S/4G3 & Novus CP/125 CP Price: In stock Now!!! Quantity: 3 sets of cutting edge Carbon Fiber Main Blades, designed for Walkera M120D01, V120D02/03/05, 4G6/S, 4G3 & Novus 125/CP helis, combine feather weight technology & carbon fiber strength to enhanced durability, ultra rigidity for extreme 3D performance.	Newest Phillips Micro Screwdriver (Set of 2): #000 Size Hardened Tip, Swivel Press Handle, Improved Tip Angle, Better Fit on Micro Screws Price: $10.95 Quantity: Two of the same phillips screwdrivers for the micro Walkera helicopters size 000- Spindle handle and hardened tip. Improved optimum tip angel for a better fit on micro screws. The choice Phillips #000 screwdriver for Wow Hobbies technicians.	TTA-MT-25700: 2.5g Turbo Ace 25700 Brushless Tail Motor: Dual Bearings, Fits C-Tail Stand, for V100D01, V120D03, CB100, 4#3B, 4G3 & Novus FP/CP Price: $18.95 Weighing in at a mere 2.5g, this is the lightest dual-bearing brushless tail motor that you can glue-mount to the C-shaped carbon tail stand (not included). The stock brushless 2g motor has no bearings & will ware out prematurely.
Wood Blades: Light & Durable Wood Main Rotor Blades for Walkera 4G6/S, 4G3, M120D01, V120D02/03/05 & Novus CP/125 CP Price: $4.95 These light weight wood blades are finished with a layer of tough enamel paint providing a very durable rugged outdoor solution for Walkera 4G6/4G3/Heli-Max Novus 125 CP/Novus CP. Natural wood fiber are less likely to split or chip in crashes than foam.	2.9g Brushless Tail Kit: Turbo Ace 29701 (HP03) 2.9g BL Motor, Carbon Holder, Exclusive Locking Clip, Red Bracket, For V120D03, 4G3 & Novus CP Price: $45.95 Quantity: Kit includes 2.9g Turbo Ace 29700 brushless tail motor, C-shape carbon holder/stand with red bracket, exclusive motor-locking clip & instructions. Designed to enhance performance on V120D03, 4G3 & Novus CP. Tail ESC & rotor are not included.	2.9g Turbo Ace 29700 (HP03-2) Brushless Tail Motor (Glue-On-Version): For CB100, 4#3B, 4G3, V100D01, V120D03 & Novus CP/FP, No Tail Rotor Price: $24.95 Quantity: This is the "glue-on-version". For the better and more secure "clip-on-version" look for the same item for $29.95. The current consensus is to convert Walkera brush and 2g brushless to the stronger 2.9g brushless tail motor with durable dual bearing.	Balance Charger for 2-Cell, 3-Cell & 1-Cell Balance Charging Cable Adapter for Charging Three 1-Cell Batteries Simultaneously Price: $27.95 Quantity: This unit charges 2-cell & 3-cell batteries and includes a charging cable adapter to balance charge three 1-cell Walkera batteries simultaneously. Other adapters will not provide a balanced charge on multiple 1-cell batteries. Batteries are not included.
Turbo Ace 29701 (Clip-On-Version): 2.9g Groved HP03-2 Brushless Motor + Mounting Clip, For CB100, 4#3B, V100D01, V120D03, 4G3 & Novus FP/CP Price: $29.95 Stock brush tail motors have limited power due to lower thrust & RPM and stock 2g brushless has no bearing which wears out easily. This is the only secured "Clip-On" (Not the "Glue-On") 2.9g double bearing version used to upgrade Walkera's tail motors.	MHE-MH-V120183: MicroHeli Upgrade CNC Washout (Stabilizer Holder) for Walkera M120D01, V120D05, V120D02 & V120D03 Price: $11.95 Quantity: Of all the upgrades for the micro flybarless helis, this is a must have since this part is a lot stronger than stock.	XTM-EA-014-3: Foam Main Blade Holder by Xtreme for Micro to 120 Sized Helicopters Price: $2.60 Quantity:	XTM-SMT1410-8800: Spin Brushless Out-Run 8800kv (13D x 10 mm) Price: $38.86 Quantity: This outrunner motor is mainly designed for runnig with 7.4v lipo, on micro size helicopters, such as Walkera V120D01, D02, D03, D05 4G6, 4G3, etc. with 15t to 17 pinion.
XTM-W46011: Xtreme Blade Pitch Datum Tool for Walkera V120D02, and V120D03 Price: $6.89 Quantity: An easy way to help set the pitch on your V120's!	XTM-W46012: Xtreme Metal Servo Horn for 4G6/S, 4#6/S/BELL, V120D01/2/3/5, M120D01 & Novus 125 CP/FP Price: $5.90 Quantity: Not just for looks, this precision aluminum CNC metal servo horn offers ultra stiff characteristic for fast and responsive swashplate movement. While plastic horns often breaks before servos, metal horns will easily out-last the helicopter's life span.	XTM-WV12003: Alu. Main Rotor Hub (V120D02S V1/ V2 ) Price: $14.98 Quantity:	HM-4#3B-Z-29 (HM-4G3-Z-31, HM-CB100-Z-21): Charger for Walkera 1-S (3.7V) Lama2-1, 4# & 4G Series, CB100, V100 & V120, M120 & Novus 125/CP/FP/CX Price: $6.95 (Same as HM-4G3-Z-31) Quantity: HM-4#3B-Z-29: Charger for all Walkera & Novus 1-cell helicopters. Chargers features convenient "plug in the wall outlet" with operation that will automatically shut-off when the battery is fully charged and the LED indicator turns from red to green.
HM-4#6-Z-33-3PLUGS: Brushless Main Electronic Speed Controller, 3 Plugs for 4#6/S, 4G3, 4#3/B, CB100, V100D01, V120D01 & Novus FP/125FP/CP Price: $19.95 Quantity: HM-4G6-Z-36 (HMXM3005)* Main Brushless Electronic Speed Controller for 4G6, 4G3 & Novus CP same as HM-4G3-Z-40, HM-4#3B-Z-34. This ESC is used only with a brushless main motor. For brushless tail motor please use a tail ESC (HM-4G3-Z-43).	HM-4G3-Z-01: Main Rotor Blades (Red Color) for 4G3, 4G6/S, V120D02/03, M120D01 & Heli-Max Novus CP/125 CP Price: $4.65 Quantity: HM-4G3-Z-01: Official Main Rotor Blades are integrated from high density foam & urethane film for 4G3, V120D02/03, M120D01, 4G6/S & Novus CP/125 CP to optimize weight & stiffness. These blades can be easily balanced to offers unparalleled 3D performance.	HM-4G3-Z-12-V3: Main Frame, The Newest Version, Fits The WK-02-1 Servos, for 4G3, V120D03 & Novus CP Price: $7.00 Quantity: HM-4G3-Z-12-V3 : Walkera has updated the Main Frame for 4G3 & Novus CP and this is the newest version that fits the WK-02-1 Servos. This is the original main frame with mounting holes that are fully compatible with multiple components.	HM-4G3-Z-15: Servo Holder/Mount V2 Version for Walkera 4G3, V120D03 & Heli-Max Novus CP Price: $3.50 Quantity: HM-4G3-Z-15: The newest version Servo Holder/Mount V2 Version (length=19.5mm) is for 4G3 & Novus CP released after January 2009. If you have a servo holder that is 18.4mm, it is the V1 servo holder which is not this item.
HM-4G3-Z-16: Main Gear for Walkera 4G3, V120D03 & Heli-Max Novus CP Price: $5.00 Quantity: HM-4G3-Z-16: When installing the Main Gear for 4G3 & Novus CP you want to make sure the elevation and teeth depth is in aligned with the pinions on the main motor so that the gears mesh properly for even and smooth operation.	HM-4G3-Z-32 (HM-4G6-Z-33, HM-M120D01-Z-27) (HMXE2024)Cyclic Servos:Set of 3 (WK-02-1):4G3 (New),4G6/S,M120D01,V120D01/2/2S/3,4#6/S/BELL & Novus CP Price: $37.95 HM-4G3-Z-32 (HMXE2024) 3G Cyclic Servos is a newer version of servos: Please make sure model# located outside the servo casing near the servo arm says WK-02-1 (newer servos). Older 2008 servos with different model# match older 2008 main frames.	HM-4G3-Z-39 (HM-4#3B-Z-33, HM-CB100) Brushless Main Motor: WK-WS-12-003, 12T For 4G3, 4#6/S/BELL, CB100, V100D01, V120D01/03 4#3/B, Novus CP/FP/125 FP Retail: $19.99 Price: $12.95 You Save: $7.04 (35 %) Quantity: HM-4G3-Z-39 (HM-4#3B-Z-33) Walkera BL Main Motor, WK-WS-12-003, 12T. If you are upgrading the 4G3, 4#6/S/BELL, V120D01/03, Novus CP/FP/125 FP please also consider the far superior & lighter Turbo Ace 71316 with rave reviews on its extraordinary power.	HM-4G3-Z-40 (WK-WST-10A-L) (HMXM3005): Main BL Electronic Speed Controller, 3 Plugs for 4G3, 4G6/S, 4#6/S, 4#3B, CB100, V100D01, V120D01/2/3 & Novus Price: $19.95 HM-4G3-Z-40 (HM-4#6-Z-33) (HMXM3005) Main Brushless Electronic Speed Controller for 4G3 & Novus CP is the same as HM-4#3B-Z-34 for 4#3B/A. This ESC is used only with a brushless main motor. For brushless tail motor please use a tail ESC (HM-4G3-Z-43).
HM-4G3-Z-42 (HM-V120D03-Z-10, HM-4#3B-Z-37, HM-CB100-Z-25 ) Brushless 2g Tail Motor: For Walkera 4G3, V120D03 & Novus CP Price: $19.95 Replace by HM-V120D03-Z-10 Quantity: HM-V120D03-Z-10 BL 2g Tail Motor with shaft keyed with flat area to lock V120D03/4G3 tail rotor. Ready to turn your 4G3 into a hot rod at 100% more lift? Click on "More Info" for additional 2.9g option and Turbo Ace Main Brushless Motor upgrade.	HM-4G3-Z-42-91 Brushless 2g Tail Motor with Stand: Assembled as Shown & Tested, For Walkera V120D03, 4G3 & Novus CP Price: $19.95	HM-4G3-Z-45: Walkera Tail Brushless Motor Holder/Stand for 4G3, V120D03 & Novus CP Price: $1.65 Quantity: HM-4G3-Z-45: Walkera Tail Brushless Motor Holder/Stand for 4G3, V120D03 & Novus CP. Under the 4#3B & CB100 Parts Category, we carry this same holder/stand for the 4#3B, CB100, V100D01 and Novus FP which is slightly shorter.	HM-4G6-Z-01: Main Rotor Blades (Black Color) for 4G6/S, 4G3, V120D02/03, M120D01 & Heli-Max Novus CP/125 CP Retail: $4.99 Price: $3.99 You Save: $1.00 (20 %) Quantity: HM-4G6-Z-01 Black Main Rotor Blades are integrated from high density foam & urethane film for 4G6/S, 4G3, V120D02/03, M120D01& Novus CP optimize weight & stiffness. These high tech blades can be easily balanced to offers unparalleled 3D performance.
HM-4G6-Z-01-Black X 5: Lot of 5 Pairs of Main Blades (Black), Premium Light Weight, Foam Blades for 4G6/S, 4G3, V120D02/03, M120D01 & Novus CP/125 CP Retail: $21.98 Price: $17.95 You Save: $4.03 (18 %) Quantity: HM-4G6-Z-01-Black X 5: Save on 5 pairs of high quality and feather weight main blades that are perfect for 3D flights. These cool blades minimize damages to 4G6/S, 4G3, V120D02/03, M120D01 & Novus CP/125 CP main rotor mechanism during crashes.	HM-4G6-Z-33 (HM-M120D01-Z-27, HM-4G3-Z-32) (HMXE2024)Set of 3 Cyclic Servos(WK-02-1):for 4G6/S/4G3,4#6/S/BELL,M120D01,V120D01/2/3/DQ02 & NovusCP/125 Price: $37.95 HM-4G6-Z-33 (HMXE2024) Set of 3 Cyclic 3G Servos: Please make sure model# located outside the servo casing near the servo arm says WK-02-1 (newer servos).	HM-4G6-Z-36: Main BL Electronic Speed Controller, 3 Plugs for 4G6/S, 4#6/S, 4G3, V120D01/02/03, 4#3B, CB100, V100D01 & Novus 125/FP/CP Price: $19.95 Quantity: HM-4G6-Z-36 is the Main ESC that controls the main motor which is different than the Tail ESC.	HM-4G6-Z-37 (HM-4#6-Z-34): Battery, 3.7V, 600mAh, 15C, for Lama2-1, 4#3/A/B/Q, 4G3, 4G6, CB100, 4G6/S, 4#6/S/BELL, V120D01/2 & Novus CX/FP/CP/125 Price: $8.15 Quantity: Just a bit longer than the older 450mAh & 500mAh batteries, this original Walkera 600mAh 1-Cell battery still retains the same thickness and width so it will fit perfectly into the same battery cages as before. Dim: 40mm x 24.5mm x 8mm, Wt: 15.3g
HM-CB100-Z-21 (HM-4G3-Z-31, HM-4#3B-Z-29):Charger for Lama2-1, 4#3/A/B/Q, 4G3/6, 4#6, CB100,V100D01/03BL/08, V120D02S, V120DQ02, & Novus125/CP/FP/CX Price: $6.95 (Same as HM-4G3-Z-31) Quantity: HM-4#3B-Z-29: Charger for all Walkera & Novus 1-cell helicopters. Chargers features convenient "plug in the wall outlet" with operation that will automatically shut-off when the battery is fully charged and the LED indicator turns from red to green.	HM-M120D01-Z-01: Main Rotor Carbon Fiber Blades for Walkera M120D01, V120D02/03/05, 4G6/S/4G3 & Novus CP/125 CP Price: $9.00	HM-M120D01-Z-27 (HM-4G6-Z-33, HM-4G3-Z-32) (HMXE2024)* Set of 3 Cyclic Servos (WK-02-1): for M120D01,V120D01/2/3, 4G6/S/4G3, 4#6/S/BELL & Novus CP/125 Price: $37.95 HM-M120D01-Z-27 Set of 3 Cyclic 3G Servos: Please make sure model# located outside the servo casing near the servo arm says WK-02-1 (newer servos).	HM-V120D02-Z-01 X 5: Lot of 5 Pairs of Main Blades for Walkera V120D02/03, M120D01, 4G6/6, 4G3, Novus 125 CP & Novus CP Price: $18.25 Quantity: Same specifications & dimensions applies to all stock blades shared by V120D02/03, M120D01, 4G6/S, 4G3, Novus 125 CP, Novus CP with cosmetic difference. This is also one of the official main blades used on the new M120D01.
HM-V120D02-Z-03: Main Blades Holder for Walkera V120D02, V120DQ02, V120D03 & V120D05 Price: $9.95	HM-V120D02-Z-04: Rotating Head for Walkera V120D02, V120DQ02, V120D03 & V120D05 Price: $10.95	HM-V120D02-Z-05: Swashplate (Newest Version 2 - Extra Thick), for Walkera V120D02, V120DQ02, V120D03 & V120D05 Price: $12.95	HM-V120D02-Z-06: Stabilizer Holder or Mixing Base Assembly (Newest Version 2), for Walkera V120D02, V120DQ02, V120D03 & V120D05 Price: $5.50
HM-V120D02-Z-07: Main Shaft for Walkera V120D02, V120DQ02 & V120D03 Price: $3.50 Quantity:	HM-V120D02-Z-08: Main Rotor Feathering Shaft for Walkera V120D02, V120DQ02, V120D03, V120D05 & M120D01 Price: $3.95	HM-V120D02-Z-09: Ball Linkage Set for Walkera V100D08, V120D02, V120DQ02, V120D03 & V120D05 Price: $4.50 Quantity:	HM-V120D03-Z-01: Main Blades For Walkera V120D03, V120D02, 4G6S, 4G6, 4G3 & Heli-Max Novus CP/125 CP Price: $4.50 Quantity:
HM-V120D03-Z-02: Tail Rotor Blades For Walkera V120D03, 4G3 & Heli-Max Novus CP Price: $2.25 Quantity:	HM-V120D03-Z-03: Main Shaft Fixed Set For Walkera V120D03 Price: $1.25 Quantity:	HM-V120D03-Z-04: Skid Landing For Walkera V120D03 Price: $3.60	HM-V120D03-Z-05: Tail Boom For Walkera V120D03 Price: $2.90 Quantity:
HM-V120D03-Z-06: Canopy For Walkera V120D03 Price: $5.25 Quantity:	HM-V120D03-Z-07: Bearing Set For Walkera V120D03 Price: $5.40 Quantity:	HM-V120D03-Z-08: Screw Set For Walkera V120D03 Price: $2.95 Quantity:	HM-V120D03-Z-09 (HM-4G3-Z-39) Brushless Main Motor: WK-WS-12-003, 12T For V120D03/01, 4G3, 4#6/S/BELL, CB100, V100D01, 4#3/B, Novus CP/FP/125 FP Price: $16.95 Quantity: HM-V120D03-Z-09 Walkera BL Main Motor, WK-WS-12-003, 12T. If you are upgrading the 4G3, 4#6/S/BELL, V120D01/03, Novus CP/FP/125 FP please also consider the far superior & lighter Turbo Ace 71316 with rave reviews on its extraordinary power.
HM-V120D03-Z-10 (HM-4G3-Z-42, HM-4#3B-Z-37) Brushless 2g Tail Motor: For Walkera V120D03, 4G3 & Novus CP Price: $19.95 HM-V120D03-Z-10 BL 2g Tail Motor with shaft keyed with flat area to lock V120D03/4G3 tail rotor. Ready to turn your V120D03 to a hot rod at 100% more lift? Click on "More Info" for additional 2.9g option and Turbo Ace Main Brushless Motor upgrade.	HM-V120D03-Z-10-91 Brushless 2g Tail Motor with Stand: Assembled as Shown & Tested, For Walkera V120D03, 4G3 & Novus CP Price: $19.95	HM-V120D03-Z-11: Tail Brushless Speed Controller With 4 Plugs For Walkera V120D03 Price: $15.90 Quantity:	HM-V120D03-Z-12: Brushless Motor Wire For Walkera V120D03 Price: $2.45 Quantity:
XTM-LP1S500: Battery, 3.7V, 500mAh, 15C, for Lama2-1, 4#3/A/B/Q, 4G3, 4G6, CB100, 4G6/S, 4#6/S/BELL, V120D01/2/3 & Novus CX/FP/CP/125 (Discontinued) Price: $6.25	TTL-MP-16T-W: 16T Brass Pinion: Fits Feigao, Walkera & Heli-Max BL, 4.5g & 6g Outrunner Motor Shafts for 4#3/B/Q/4G3/4G6/CB100 & Novus 125 CP/FP Price: $3.95 Quantity: Center hole of this 16T pinion fits the 1.5mm shaft of the Walkera BL main motor, Feigao 12mmx20mm main motor, Losi 10,250kv or any motor with 1.5mm shaft. The pitch of this pinion matches the Walkera 4#3A, 4#3B, 4#3Q, 4G3, Novus FP & CP Main Gear.	RCT-DS040 Large Socket Driver 4.0mm Price: $5.95 Quantity: Fits all 4mm applications and the Walkera 4G3, 4G6, 4G6S, 4#6, 4#6Bell, 4F200, 4F180, V120D01, V120D02, CB180, CB180Z, UFLYS, V200D01, V200D02, Novus 125 CP, Novus 125 FP and Novus CP main blade holding nut.	Walkera Transmitter Neck Strap Price: $7.95 Quantity: Radio transmitter hands free neck strap. Total length 45 inches.
Walkera WK-2801-PRO (Version 2.3) Transmitter: Programmable, 2.4GHz, 8-Channels, For Walkera & Novus Helicopters !!! Price: $159.95 Quantity: Compatible to all the latest 3 axis Walkera & Heli-Max Novus receivers such as RX2433, RX2435, RX2437S, RX2610S & Heli-Max Novus equivalents.

Walkera V120D03 Parts

WALKERA V120D03 PARTS