This unit charges 2-cell & 3-cell batteries and includes a charging cable adapter to balance charge three 1-cell Walkera batteries simultaneously. Other adapters will not provide a balanced charge on multiple 1-cell batteries. Batteries are not included.

This balance charging cable adapter is used on a 3-cell charger (HM-CB180-Z-32 or B6 Charger - not included) to balance & charge 3 separate 1-cell batteries simultaneously. Other adapters will not provide a balanced charge on multiple 1-cell batteries.

The only dual case with variable form design that carries any 2 micro-helis + Tx + Misc. Turbo Ace case is meticulously crafted from high gauge aluminum and features a heavy duty handle for durability. Patent pending on flexible variable form design.

Now features adjustable height. Designed by seasoned pilots, the ultimate stronger & lighter carbon tail stand & fin set in the market. A narrower horizontal fin prevents blade strikes plus 2 critical screws to secure the tail block. Includes tail blades.

One Phillips screwdriver for the micro Walkera helicopters size 000- Spindle handle, magnetic and hardened tip. Improved optimum tip angel for a better fit on micro screws. The choice Phillips #000 screwdriver for Wow Hobbies technicians.

It's time to retire those old "AA" batteries. This is the smartest new solution to charge up your Walkera transmitter radio. No more guess work on 8 "AA" batteries with iffy connections in a tray. Everything is consolidated into one simple reliable unit.

Use either 4 short or 4 long steel legs (both included) in this stabilizing and shock absorbing design to greatly reduce damages to your precious helicopter during pilot training. Total weight with 4 short legs: 4.4g, Total weight with 4 long legs: 6g

Dimensions and micro connector fits 4#3/A/B/Q, 4G3/6/S, 4#6/S/Bell, CB100, V120D##, Novus CX/FP/CP. This little dynamo will bring new and exciting energy to your high performance Walkera helis with brushless motors & Turbo Hot Rod upgrades.

Dimensions and micro connector fits 4#3/A/B/Q, 4G3/6/S, 4#6/S/Bell, CB100, V120D##, Novus CX/FP/CP. This little dynamo will bring new and exciting energy to your high performance Walkera helis with brushless motors & Turbo Hot Rod upgrades.

Turbo Ace Super Capacity 650-700mAh Battery, designed to fit the Walkera 4G3/6/S, 4#6/S/BELL, CB100 & the V120 Series, will extend your flight time. Higher 20C high output increases power for more extreme maneuvers in both sport flying and 3D flight.

Manufactured by the same Linear battery factory, the 650mAh is now available using the same process and technology as the 400mAh Linear battery. It provides the greatest CG adjustment (1.2 inch) ever possible for the 4G6/4#6/V120D02/ Novus 125.

XP-12A-2 version 2 with improved firmware that gives outrunner 5-8% additional head speed (power boost). It wakes up the old HP08 and retains the same flight time. Includes Walkera battery, receiver and motor plugs installed. It is plug and play.

This is a special edition XP-7A-2 programmable ESC made to compatibility spec to both the outrunners/ inrunners w/Anti-cog outrunner firmware. Plug & play w/ Walkera connectors. It is ideal for upgrading to the lighter outrunner motors.

This balance charging cable adapter is used on a 3-cell charger (HM-CB180-Z-32 or B6 Charger - not included) to balance & charge 3 separate 1-cell batteries simultaneously. Other adapters will not provide a balanced charge on multiple 1-cell batteries.

Due to air shipping specs, all 4 bottles are 20% - 25% filled (about a quarter of a bottle) to prevent messy air shipping spills. We have adjusted the price accordingly so you will have a little bit of glue, lock, grease & adhesive for a few bucks.

This pitch scale is a wider design that measures +15 to -15 degrees Instead of the typical +12 to -12 degrees. Contrasting orange scale & deep blue pointer with a larger finger friendly low increment knob makes it easy to see and make minute adjustments.

Version 2 now comes with locking pin for added security. Designed for optimum view angle, it eases arm, wrist or hand strain associated with holding and controlling the transmittion sticks at the same time.

This complete set includes magnetic base, protective metal case and micro blade balancer attachment to balance main blades for micro and super micro helicopoter. Compatible for models from Walkera, E-flite, Align T-Rex 100, Novus, Nine Eagle and etc.

Designed for Walkera M120D01, V120D02/03/05, 4G6/S, 4G3 & Heli-Max Novus 125 CP & Novus CP helicopters, these cutting edge Carbon Fiber Main Blades, the perfect compliment for any micro CP helicopter, offers excellent performance and durability.

3 sets of cutting edge Carbon Fiber Main Blades, designed for Walkera M120D01, V120D02/03/05, 4G6/S, 4G3 & Novus 125/CP helis, combine feather weight technology & carbon fiber strength to enhanced durability, ultra rigidity for extreme 3D performance.

We include exclusive Wow Instructions and adjustments with this MicroHeli Part.

We included custom Wow instructions for you to make the necessary adjusmentss on this MicroHeli part to optimize performance.

Of all the upgrades for the micro flybarless helis, this is a must have since this part is a lot stronger than stock.

Designed by seasoned pilots, this is ultimate stronger & lighter carbon tail stand & fin set. A slightly taller tail stand for better blades clearance & a narrower horizontal fin prevents blade strikes plus 2 critical screws to secure the tail block.

Upgrade Carbon Tail Blades with 12% more surface area than stock 4G6S tail blades for added tail authority.

HM-4G6-Z-36 (HMXM3005)* Main Brushless Electronic Speed Controller for 4G6, 4G3 & Novus CP same as HM-4G3-Z-40, HM-4#3B-Z-34. This ESC is used only with a brushless main motor. For brushless tail motor please use a tail ESC (HM-4G3-Z-43).

HM-4G6-Z-37600 Battery: (3.7v, 600mAh, 15C) fits perfectly in Walkera & Novus 1- cell helis & offers longer flight time than the stock 400-500mAh batteries. Please click on "More Info" to see the link for the ultimate "650mAh" high capacity battery.

HM-4G3-Z-01 X 5 Pairs (RED): Save on 5 pairs of high quality feather weight main blades that are perfect for 3D flights. These cool hight tech blades minimize & prevent significant damages to the 4G3 & Novus CP main rotor mechanism during crashes.

HM-4G3-Z-01: Official Main Rotor Blades are integrated from high density foam & urethane film for 4G3, V120D02/03, M120D01, 4G6/S & Novus CP/125 CP to optimize weight & stiffness. These blades can be easily balanced to offers unparalleled 3D performance.

HM-4G6-Z-33 (HMXE2024)* Set of 3 Cyclic 3G Servos: Please make sure model# located outside the servo casing near the servo arm says WK-02-1 (newer servos).

HM-4G6-Z-33B (HMXE2024)* Genuine Walkera new cyclic servo with 45mm wire. Please make sure model# located outside the servo casing near the servo arm says WK-02-1 (newer servos). Older 2008 servos with different model# match older 2008 main frames.

HM-4G6-Z-33C (HMXE2024)* Genuine Walkera new cyclic servo with 85mm wire. Please make sure model# located outside the servo casing near the servo arm says WK-02-1 (newer servos). Older 2008 servos with different model# match older 2008 main frames.

Canopy for 4G6S, 4G6 & Novus 125 CP: Same as HM-4G6-Z-30 but with 4G6S lettering instead of 4G6.

HM-4#3B-Z-29: Charger for all Walkera & Novus 1-cell helicopters. Chargers features convenient "plug in the wall outlet" with operation that will automatically shut-off when the battery is fully charged and the LED indicator turns from red to green.

Same specifications & dimensions applies to all stock blades shared by V120D02/03, M120D01, 4G6/S, 4G3, Novus 125 CP, Novus CP with cosmetic difference. This is also one of the official main blades used on the new M120D01.

Same specifications & dimensions applies to all stock blades shared by V120D02/03, M120D01, 4G6/S, 4G6, 4G3, Novus 125 CP, Novus CP with cosmetic difference. This is also the official main blades used on the new M120D01.

Same specifications & dimensions applies to all stock tail blades shared by V120D02/D02S & V120D01 with cosmetic difference.

This Metalic Red V120D02 canopy can also be used on V120D01, 4G6S, 4G6, 4#6S, 4#6, 4#6 BELL, Novus 125 CP & Novus 125 FP. Metalic Red is a darker glossier red that is prefectly matched with the red metal hardware on you helicopter.

This V120D02 canopy share the same specifications and dimensions as V120D01, 4G6S, 4G6, 4#6S, 4#6, 4#6 BELL, Novus 125 CP & Novus 125 FP canopies with cosmetic difference.

Sustains most crashes & bounces right back to its true form. You can easily recover your investment from just one crash by saving labor, shipping, parts & time waiting for your parts. It keeps head stay balanced even with high speed motor.For V120D02 heli

A sliver background compliments perfectly with chrome fixtures of the Walkera 4G6S. Then to maximized contrast, classic bold red stripes are accentuated by black borders for that slick luxurious finish on an angular design filled with sculpted details.

Looking for a highly visible and a stream line 4G6 canopy? This heavy duty crash resistant mustard yellow canopy includes rubber grommets and black & white decals. This canopy is customed to the Walkera 4G6 specifications with a weight for 4.1g.

Center hole of this 16T pinion fits the 1.5mm shaft of the Walkera BL main motor, Feigao 12mmx20mm main motor, Losi 10,250kv or any motor with 1.5mm shaft. The pitch of this pinion matches the Walkera 4#3A, 4#3B, 4#3Q, 4G3, Novus FP & CP Main Gear.

Fits all 4mm applications and the Walkera 4G3, 4G6, 4G6S, 4#6, 4#6Bell, 4F200, 4F180, V120D01, V120D02, CB180, CB180Z, UFLYS, V200D01, V200D02, Novus 125 CP, Novus 125 FP and Novus CP main blade holding nut.