Turbo Ace Super Capacity 650mAh Battery, designed to fit the Walkera 4G3/6/S, 4#6/S/BELL, CB100 & the V120 Series, will extend your flight time. Higher 20C high output increases power for more extreme maneuvers in both sport flying and 3D flight.

Dimensions and micro connector fits 4#3/A/B/Q, 4G3/6/S, 4#6/S/Bell, CB100, V120D##, Novus CX/FP/CP. This little dynamo will bring new and exciting energy to your high performance Walkera helis with brushless motors & Turbo Hot Rod upgrades.

This unit charges 2-cell & 3-cell batteries and includes a charging cable adapter to balance charge three 1-cell Walkera batteries simultaneously. Other adapters will not provide a balanced charge on multiple 1-cell batteries. Batteries are not included.

One Phillips screwdriver for the micro Walkera helicopters size 000- Spindle handle, magnetic and hardened tip. Improved optimum tip angel for a better fit on micro screws. The choice Phillips #000 screwdriver for Wow Hobbies technicians.

Set of 3 metal shims (super thin paper-weight washers)- Includes one 0.1mm , one 0.2mm and one 0.3mm thick shim with 6mm bore diameter. 2.9g motor and carbon stand/holder shown on photo are not included.

Weighing at 0.5g, the tail C-shape Carbon Stand/Holder + red tail boom CNC Metal Bracket fits the 2.5g (Turbo Ace 25700) & 2.9g (Turbo Ace 29701) upgrade for V100D01, 4#3B, CB100 & Novus FP* round tail booms. Tail rotor and motor are not included.

This is a special edition XP-7A-2 programmable ESC made to compatibility spec to both the outrunners/ inrunners w/Anti-cog outrunner firmware. Plug & play w/ Walkera connectors. It is ideal for upgrading to the lighter outrunner motors.

This balance charging cable adapter is used on a 3-cell charger (HM-CB180-Z-32 or B6 Charger - not included) to balance & charge 3 separate 1-cell batteries simultaneously. Other adapters will not provide a balanced charge on multiple 1-cell batteries.

Package include 4 short steel legs and 4 long steel legs, extremely durable for training purpose. Total weight with 4 short legs: 4.2g Total weight with 4 long legs: 5.8g

It's a hard to find the right kind of Thread Locking Adhesive that works and dries quick. Worse yet, certain thread locks are hard to dry.

This complete set includes magnetic base, protective metal case and micro blade balancer attachment to balance main blades for micro and super micro helicopoter. Compatible for models from Walkera, E-flite, Align T-Rex 100, Novus, Nine Eagle and etc.

This stock Walkera 2g brushless motor comes fully assembled and tested on the motor holder/stand (included). All you have to do is mount it on the tail boom and solder the wires back and you are done. Use the existing rubber grommet which is not included.

This stock Walkera 2g brushless motor comes fully assembled and tested on the motor holder/stand (included). All you have to do is mount it on the tail boom and solder the wires back and you are done. Use the existing rubber grommet which is not included.

Stock brush tail motors have limited power due to lower thrust & RPM and stock 2g brushless has no bearing which wears out easily. This is the only secured "Clip-On" (Not the "Glue-On") 2.9g double bearing version used to upgrade Walkera's tail motors.

Tail kit includes 2.9g Turbo Ace 29700 brushless tail motor, C-shape holder w/ carbon stand & RED CNC tail boom clamp- Only weights 0.5g , brushless wire set and exclusive motor-locking clamp. Holder fits 4#3B or Novus FP boom. Tail rotor not included.

These are premium extra durable blades for Walkera micro helicopters. Although blade dimensions are the same for Walkera CB100, 4#3A, 4#3B, V100D01 & Novus FP, the blue/black/white color stripes matches best with the Walkera CB100.

HM-4#3B-Z-(34&39) Combo wires set & Main ESC or Electronic Speed Controller (= HM-4G3-Z-40) for 4#3A, 4#3B, V100D01 & Novus FP is used in conjunction with a brushless main motor. For brushless tail motor please use the Tail ESC (HM-4#3B-Z-38).

Main Rotor Blades for the Walkera 4#3B/A, V100D01, CB100 & Novus FP are made of resilient zero memory plastic to maximize form retention. To prevent stripping, please do not over tighten the miniature screws.

Walkera HM-4#3B-Z-03 Tail Rotor Blade for 4#3B & 4#3A is the same as Heli-Max Tail Rotor Blade for Novus FP with only minor cosmetic differences. This is a very commonly used replacement part.

HM-4#3B-Z-15: Servo Holder Frame Mount is designed to secure servos for the 4#3A, 4#3B & Novus FP helicopters.

HM-4#3B-Z-32 : The newest version Main Frame for Walkera 4#3A, 4#3B, V100D01 & Heli-Max Novus FP will fit with all Walkera brush & brushless motors plus many third party brushless motors such as the Turbo Ace 91416.

HM-4#3B-Z-33. This is the standard Walkera Brushless Motor with 12T pinion for 4#3A/B/Q, CB100, V100D01, 4G3, Novus FP/CP. Before you buy this motor, check out the rugged Turbo Ace 91416 (under the same category) which is lighter and a lot more powerful.

HM-4#3B-Z-34 (HMXM3005)* Main ESC or Electronic Speed Controller for the Main Motor which is different than the ESC for the Tail Motor. For brushless tail motor please use the Tail ESC (HM-4#3B-Z-38).

HM-4G6-Z-36 is the Main ESC that controls the main motor which is different than the Tail ESC.

These blades are used on the CB100, V100D01, 4#3B & Novus FP helicopters.

This yellow/white/black tail rotor is usually used on the Walkera CB100, but it's the same as the 4#3B & V100D01 rotor except the color is different. You can also use this rotor for the upgraded MCPX Tail which has a 120SR motor (Not for stock MCPX tail).

HM-4#3B-Z-29: Charger for all Walkera & Novus 1-cell helicopters. Chargers features convenient "plug in the wall outlet" with operation that will automatically shut-off when the battery is fully charged and the LED indicator turns from red to green.

New Version for Walkera CB100 & V100D01

HM-CB100-Z-23: Tail Motor Brushless Wire (3 Pin Header with 3 Wires) for CB100 & V100D01. This is usually used with the newer receiver that doesn't require a additional "Y" Connector wire for the tail ESC.

HM-CB100-Z-24 (HM-4#3B-Z-33, HM-4G3-Z-39): Walkera Brushless Main Motor, WK-WS-12-003, 12T, for CB100, V100D01, 4#3A, 4#3B, 4G3, Novus CP & FP-1.

Do not order this unless your CB100 has the RX2436 receiver. HM-CB100-Z-27-2PLUGS has 2 Plugs that is only compatible to CB100 with RX2436 or V100D01 with RX2441V receivers. If you have the RX2406 series receivers you need to get CB100Z-27-3PLUGS instead.

Radio transmitter hands free neck strap. Total length 45 inches.

The Walkera WK-2402 Transmitter is compatible with all Walkera and Novus 4-Channel 2.4gHz helicopters.

Compatible to all the latest 3-Axis Walkera receivers such as RX2433, RX2435, RX2437S, RX2610S and Heli-Max Novus equivalents.... ETC.

Compatible to all the latest 3 axis Walkera & Heli-Max Novus receivers such as RX2433, RX2435, RX2437S, RX2610S & Heli-Max Novus equivalents.