Retail: $34.95
Price: $19.95
You Save: $15.00 (43 %)
XP-12A-2 version 2 with improved firmware that gives outrunner 5-8% additional head speed (power boost). It wakes up the old HP08 and retains the same flight time. Includes Walkera battery, receiver and motor plugs installed. It is plug and play.
|
|
|
|
|
|
|
|
Price: Turbo Ace 81016 Brushless Motor has been discontinued and it has been replaced by the more powerful 91416
Turbo Ace 81016 Brushless Motor has been discontinued and it has been replaced by the more powerful 91416.
|
|
|
|
|
|
|
|
|
|
Price: Discontinued -Replace by WWH-EE-ESC-XP-7A-6
This is a special edition XP-7A-3 reprogrammed ESC made to be compatible to the E-Flite Blade MCP X micro helicopter. Package includes a complete MCP X brushless conversion diagram for TheSteve converter, ESC, MCP X receiver hook up.
|
|
|
No technical support is available when you do this conversion. Go to
http://www.rcgroups.com/forums/showthread.php?t=830186 for additional help. We do not assume any liability for the acurracy and the result of this diagram.
|
|
|
|
|
|
|
Extended custom tail boom for the Walkera 4#3,4#3A,4#3B & Heli-Max Novus FP tail is 1/4 inch longer than 4#3B's HM-4#3B-Z-17 & Heli-Max's tail boom & 1/2 inch longer than the 4#3 stock boom and give the tail extra authority.
|
Center hole of this 14T pinion fits the 1.5mm shaft of the Walkera BL main motor, Feigao 12mmx20mm main motor, Losi 10,250kv or any motor with 1.5mm shaft. The pitch of this pinion matches the 4#3A, 4#3B, 4#3Q , 4G3, Novus FP & CP Main Gears.
|
|
|
This Gear is a 64-pitch-teeth which matches with the 9T, 10T and 11T pinions that are also available in this store.
|
|
|
|
|
|
Center hole of the pinion fits the 1.5mm shaft of the Feigao 12mmx20mm, Losi 10,250kv or any motor with 1.5mm shaft. The pitch of this pinion matches the 4#3 main gear only. 4#3b main gear will need to be regeared to 4#3 main gear that needs to be ordered
|
This item is for 2 cell AR6300 dual channel conversion only. This battery fits into the stock battery cage of the 4#3, 4#3A, 4#3B, 5G6.
|
This is a high speed brushless converter with TheSteve chip build-into the PCB for easy Plug-N-Play. It is extremely easy to install and can convert any brush receiver signal to brushless and it will work and plug into most brushless ESC.
|
Price: This item is replaced by WWS-THESTEVE-HIGH
This is a low speed brushless converter with genuine TheSteve chip build-into the PCB for easy Plug-N-Play. It is extremely easy to install and can convert any brush receiver signal to brushless and it will work and plug into most brushless ESC.
|
This ESC can be converted to run on 1 cell. To view the 2 to 1 cell conversion diagram, click MORE INFO, VIEW MORE IMAGES and click the NEXT tab. No warranty, guarantee or technical support is available when you make this conversion.
|
|
This is a 3 wire set for the brushless tail setup (30AWG). Note that most 30AWG wires will have a hard time fitting through the tail boom. This set of wires has extremely thin coating and will easily fit inside the hollow boom. They are appx 8 inches in l
|
|
|
|
|
Screws- set of 2 for the 4.5g TURBO ACE 411500 brushless motor
|
|
|
| | | |