Turbo Ace Super Capacity 650mAh Battery, designed to fit the Walkera 4G3/6/S, 4#6/S/BELL, CB100 & the V120 Series, will extend your flight time. Higher 20C high output increases power for more extreme maneuvers in both sport flying and 3D flight.

Dimensions and micro connector fits 4#3/A/B/Q, 4G3/6/S, 4#6/S/Bell, CB100, V120D##, Novus CX/FP/CP. This little dynamo will bring new and exciting energy to your high performance Walkera helis with brushless motors & Turbo Hot Rod upgrades.

This unit charges 2-cell & 3-cell batteries and includes a charging cable adapter to balance charge three 1-cell Walkera batteries simultaneously. Other adapters will not provide a balanced charge on multiple 1-cell batteries. Batteries are not included.

Premium linear current battery features consistent 20C high output without parabolic degradation towards the latter part of the flight cycle. The #1 choice for professionals, It feels like a freshly charged battery all the way to the end of the flight!

You can effortlessly prolong battery life by frequently checking its voltage. Measuring 1-cell for Walkera/Novus and 3-6 cell for Trex450/600 helis, this one step plug & test meter is accurate and much easier to use than most cumbersome voltage meters.

This is a battery meter with built-in low voltage alarm can also be installed on board helicopters. At low voltages, a led will light up and the double buzzers will also sound a warning for pilots who are too far from the helicopter to prevent crashes.

Customized to fit on Walkera transmitters, this Xtreme neck strap stabilizer bracket realigns the Tx to an optimum operating and viewing angle to ease arm, wrist & hand strain associated with holding and controlling the transmitter sticks simultaneously.

It's a hard to find the right kind of Thread Locking Adhesive that works and dries quick. Worse yet, certain thread locks are hard to dry.

Two of the same phillips screwdrivers for the micro Walkera helicopters size 000- Spindle handle and hardened tip. Improved optimum tip angel for a better fit on micro screws. The choice Phillips #000 screwdriver for Wow Hobbies technicians.

This unit charges 2-cell & 3-cell batteries and includes a charging cable adapter to balance charge three 1-cell Walkera batteries simultaneously. Other adapters will not provide a balanced charge on multiple 1-cell batteries. Batteries are not included.

HM-4G6-Z-37600 Battery: (3.7v, 600mAh, 15C) fits perfectly in Walkera & Novus 1- cell helis & offers longer flight time than the stock 400-500mAh batteries. Please click on "More Info" to see the link for the ultimate "650mAh" high capacity battery.

HM-4G3-Z-30:* Battery(3.7v 400mAh) for Walkera 4G3 & Novus CP. Please see the upgraded version rated at 20C (instead of 12C) with longer flight time on sale for the same price per battery at http://wowhobbies.com/battery20cfor43-1.asp

HM-4G3-Z-31: Charger is shared between all micro 1s Walkera and Heli-Max Helicopter Models. The charger will automatically shut off upon charge completion and the LED indicator will turn from red to green. Charges any 1 cell Lipo 50 mAh to 1000 mAh.

Just a bit longer than the older 450mAh & 500mAh batteries, this original Walkera 600mAh 1-Cell battery still retains the same thickness and width so it will fit perfectly into the same battery cages as before. Dim: 40mm x 24.5mm x 8mm, Wt: 15.3g

HM-5G6-Z-03: Blade Holder/Grip for Lama2-1, Lama2, Novus CX & 5G6/-1 which are all made by Walkera.

HM-5G6-Z-14: Bearing Set is fully compatible with Walkera 5G6, 5G6-1, Lama2, Lama2-1 & Helimax Novus CX helicopters.

Replacement part HM-LAMA2-1-Z-25

Walkera HM-LM2-1-Z-02 pictured here is the same as the Helimax Novus CX Flybar Assembly and is 100% for Lama 2, Lama 2-1, Novus CX, 5G6 & 5G6-1. All Walkera and Helimax Novus Parts are made by Walkera

HM-LM2-1-Z-03: Blade Holder/Grip for Lama2-1, Lama2, Novus CX & 5G6 which are all made by Walkera.

HM-LM2-1-Z-09 (HM-LM2-Z-09) aka T-shape Holder Lower Head Block/Blade Drive is 100% compatible with Lama 2-1, Lama2, Novus CX & 5G6(-1). Walkera made all these helis and they have in common many of the same parts.

HM-LM2-1-Z-16: Ball Bearing Set manufactured by Walkera for the 5G6, 5G6-1, LAMA2, LAMA2-1 & HeliMax NOVUS CX helicopters

No technical support is available when you do this conversion. Go to http://www.rcgroups.com/forums/showthread.php?t=830186 for additional help. We do not assume any liability for the acurracy and the result of this diagram.

Radio transmitter hands free neck strap. Total length 45 inches.

The Walkera WK-2402 Transmitter is compatible with all Walkera and Novus 4-Channel 2.4gHz helicopters.

Compatible to all the latest 3 axis Walkera & Heli-Max Novus receivers such as RX2433, RX2435, RX2437S, RX2610S & Heli-Max Novus equivalents.