This unit charges 2-cell & 3-cell batteries and includes a charging cable adapter to balance charge three 1-cell Walkera batteries simultaneously. Other adapters will not provide a balanced charge on multiple 1-cell batteries. Batteries are not included.

This balance charging cable adapter is used on a 3-cell charger (HM-CB180-Z-32 or B6 Charger - not included) to balance & charge 3 separate 1-cell batteries simultaneously. Other adapters will not provide a balanced charge on multiple 1-cell batteries.

The only dual case with variable form design that carries any 2 micro-helis + Tx + Misc. Turbo Ace case is meticulously crafted from high gauge aluminum and features a heavy duty handle for durability. Patent pending on flexible variable form design.

Now features adjustable height. Designed by seasoned pilots, the ultimate stronger & lighter carbon tail stand & fin set in the market. A narrower horizontal fin prevents blade strikes plus 2 critical screws to secure the tail block. Includes tail blades.

One Phillips screwdriver for the micro Walkera helicopters size 000- Spindle handle, magnetic and hardened tip. Improved optimum tip angel for a better fit on micro screws. The choice Phillips #000 screwdriver for Wow Hobbies technicians.

At 9.1g, this ultra light premium linear current battery features consistent 20C high output without parabolic degradation towards the latter part of the flight cycle. Reduced inertia is extremely beneficial for extreme 3D and accelerated sport flying.

Premium linear current battery features consistent 20C high output without parabolic degradation towards the latter part of the flight cycle. The #1 choice for professionals, It feels like a freshly charged battery all the way to the end of the flight!

This is a battery meter with built-in low voltage alarm can also be installed on board helicopters. At low voltages, a led will light up and the double buzzers will also sound a warning for pilots who are too far from the helicopter to prevent crashes.

Turbo Ace Super Capacity 650mAh Battery, designed to fit the Walkera 4G3/6/S, 4#6/S/BELL, CB100 & the V120 Series, will extend your flight time. Higher 20C high output increases power for more extreme maneuvers in both sport flying and 3D flight.

Dimensions and micro connector fits 4#3/A/B/Q, 4G3/6/S, 4#6/S/Bell, CB100, V120D##, Novus CX/FP/CP. This little dynamo will bring new and exciting energy to your high performance Walkera helis with brushless motors & Turbo Hot Rod upgrades.

Dimensions and micro connector fits 4#3/A/B/Q, 4G3/6/S, 4#6/S/Bell, CB100, V120D##, Novus CX/FP/CP. This little dynamo will bring new and exciting energy to your high performance Walkera helis with brushless motors & Turbo Hot Rod upgrades.

Compatible with all Walkera and Novus 6 channel 2.4gHz helicopters

Includes Walkera battery and receiver plugs installed. This is the higher current brother of the common XP-7A Ebay ESC. It works with 1-3s applications and it's used mostly on the brushless main motor conversion to start outrunner brushless motor easier.

XP-12A-2 version 2 with improved firmware that gives outrunner 5-8% additional head speed (power boost). It wakes up the old HP08 and retains the same flight time. Includes Walkera battery, receiver and motor plugs installed. It is plug and play.

This is a special edition XP-7A-2 programmable ESC made to compatibility spec to both the outrunners/ inrunners w/Anti-cog outrunner firmware. Plug & play w/ Walkera connectors. It is ideal for upgrading to the lighter outrunner motors.

Turbo Ace 31714 inrunner is a plug-n-play BL motor for the 4G6/S, 4#6/S & Novus 125 CP/FP. It generates an additional 400 RPM vs. stock motor, runs cooler at 100% throttle. It only works properly with these ESC (HM-CB100-Z-26, HM-4#3B-Z-34, HM-4G3-Z-40).

The all new Lethal-Power WOW-07 (formally named HP07-2) is here. It supersedes the 81220 in power and efficiency. It's custom to Wow Hobbies' specifications. Make sure that out-runner motor wires are soldered directly to ESC for consistent performance.

Not all HP08 are created equal ! The Thermo-Cool light weight HP08-2S is a 2-CELL HP-08 customed to Wow Hobbies' specifications: Note that high performance motor wires must be soldered directly to ESC for best performance. Mainly for 4G6S & Novus 125 CP.

Due to air shipping specs, all 4 bottles are 20% - 25% filled (about a quarter of a bottle) to prevent messy air shipping spills. We have adjusted the price accordingly so you will have a little bit of glue, lock, grease & adhesive for a few bucks.

Customized to fit on Walkera transmitters, this Xtreme neck strap stabilizer bracket realigns the Tx to an optimum operating and viewing angle to ease arm, wrist & hand strain associated with holding and controlling the transmitter sticks simultaneously.

RX2610S factory settings are often incorrect and most vendors don't even know what the settings should be. Wow Hobbies will make the necessary corrections on the RX2610S & give you additional instructions so you won't run into a wall during installation.

It's a hard to find the right kind of Thread Locking Adhesive that works and dries quick. Worse yet, certain thread locks are hard to dry.

Two of the same phillips screwdrivers for the micro Walkera helicopters size 000- Spindle handle, magnetic and hardened tip. Improved optimum tip angel for a better fit on micro screws. The choice Phillips #000 screwdriver for Wow Hobbies technicians.

These light weight wood blades are finished with a layer of tough enamel paint providing a very durable rugged outdoor solution for Walkera 4G6/4G3/Heli-Max Novus 125 CP/Novus CP. Natural wood fiber are less likely to split or chip in crashes than foam.

The long awaited virtually indestructible CNC Metal Rotor Head Block for the 4G6, 4G6S, 4G3, Novus 125 CP & Novus CP is finally here. No more pain with constant replacement and balancing of the stock CNC rotor head.

We include exclusive Wow Instructions and adjustments with this MicroHeli Part.

We included custom Wow instructions for you to make the necessary adjusmentss on this MicroHeli part to optimize performance.

Not just for looks, this precision aluminum CNC metal servo horn offers ultra stiff characteristic for fast and responsive swashplate movement. While plastic horns often breaks before servos, metal horns will easily out-last the helicopter's life span.

HM-4G3-35-36-37-38: Buyer beware, there is a knock-off 4G3 head set for $19.95 with missing metal head block. Genuine Walkera Metal Head Set includes blade grips, head block, swash & bell mixer in pro pkg. 4G6's longer shaft (HM-4G6-Z-10) is not included.

HM-4G3-35+36+37+38: Buyer beware, there is a knock-off 4G3 head set for $19.95 with missing metal head block. Genuine Walkera Metal Head Set includes blade grips, head block, swash & bell mixer. 4G6's longer shaft (HM-4G6-Z-10) is not included.

Now shipping newest version 3 as shown on photo. This version of the skid has been upgraded to stronger plastic material that resists crashes.

The HM-4#6-Z-M3A Walkera brushless motor upgrade is selected and tested to give the Walkera 4#6 and 4#6S extra power & torque when using the 3 axis gyro (RX2433 Receiver).

HM-4G6-Z-36 (HMXM3005)* Main Brushless Electronic Speed Controller for 4G6, 4G3 & Novus CP same as HM-4G3-Z-40, HM-4#3B-Z-34. This ESC is used only with a brushless main motor. For brushless tail motor please use a tail ESC (HM-4G3-Z-43).

HM-4G3-Z-03: High impact plastic Main Blades Holder/Grip Set stay true to form & function to keep main blades properly aligned even at extremely high rotations. The intended flexibility prevents damage or skewing of the rotational plain.

HM-4G3-Z-04 (HM-4G6-Z-03): The Walkera made the Flybar Steering Ball also know as the Heli-Max Flybar Bell Mixer Ball Carrier for the 4G3, 4G6, 4G6S & Novus CP, Novus 125 CP.

HM-4G3-Z-05 (HM-4G6-Z-05): Complete Ball Linkage Set is manufactured using a special binding process that combines steel and high impact plastic. This original set is 100% compatible with the Walkera 4G3, 4G6, 4G6S & Novus CP, Novus 125 CP helicopters.

HM-4G3-Z-06: Walkera High precision Flybar Connector to mount paddles for 4G3, 4G6, 4G6S & Novus CP, 125 CP comes with matching screws. Please don't over tighten the mounts to prevent stripping & use lock-it on the screws to keep them from coming loose.

HM-4G3-Z-13 (HM-4G6-Z-11): Sometimes a crash results in a bent Feathering Shaft/Spindle which is a common causes of gyration. With some experience, you can analyze this problem by looking for any inconsistency in the extended angle of the main blades.

HM-4G3-Z-31: Charger is shared between all micro 1s Walkera and Heli-Max Helicopter Models. The charger will automatically shut off upon charge completion and the LED indicator will turn from red to green. Charges any 1 cell Lipo 50 mAh to 1000 mAh.

HM-4G3-Z-32 (HMXE2024)* 3G Cyclic Servos is a newer version of servos: Please make sure model# located outside the servo casing near the servo arm says WK-02-1 (newer servos). Older 2008 servos with different model# match older 2008 main frames.

HM-4G3-Z-35: Aluminum CNC Metal Main Blades Holders/Grips for 4G3, 4G6, 4G6S & Novus CP, Novus 125 CP. Please also see the fully assembled Complete CNC Metal Head Set under HM-4G3-Z-35-36-37-38.

This Walkera brushless motor is custom fitted with a 16 teeth pinion for more powerful 3D on Walkera 4G6, 4G3 & Novus CP. You can also use this powerful option on a 4#3B, CB100, Novus FP in combination with a brushless tail motor.

HM-4G6-Z-01 Black Main Rotor Blades are integrated from high density foam & urethane film for 4G6/S, 4G3, V120D02/03, M120D01& Novus CP optimize weight & stiffness. These high tech blades can be easily balanced to offers unparalleled 3D performance.

HM-4G6-Z-01-Black X 5: Save on 5 pairs of high quality and feather weight main blades that are perfect for 3D flights. These cool blades minimize damages to 4G6/S, 4G3, V120D02/03, M120D01 & Novus CP/125 CP main rotor mechanism during crashes.

HM-4G6-Z-02 (HM-4G3-Z-02): The Flybar is made of torque-resistant steel, a critical element of the main rotor mechanism. The Walkera 4G6, 4G3 & the Heli-Max Novus CP helicopters share many of the same parts & components which are all made by Walkera.

HM-4G6-Z-07: Genuine Walkera CNC Metal Rotor Head Block Set for 4G3, 4G6, 4G6S, Novus CP & Novus 125 CP. Also check out upgrade replacement HM-4G3-Z-366 or HM-4G6-Z-077.

HM-4G3-Z-37 : CNC Aluminum Swashplate for 4G3, 4G6, 4G6S & HeliMax Novus CP, Novus 125 CP. Please also look into the Complete CNC Metal Head Set listed under HM-4G3-Z-35-36-37-38.

Same as HM-4G3-Z-38 except in chrome finish intead of red. The Ball Linkage/Mixer arms that come with the HM-4G3-Z-38 is not included in the 4G6-Z-09 package.

Now shipping newest version as shown on photo. This version of the skid has been upgraded to stronger plastic material that resists crashes.

HM-4G6-Z-33 (HMXE2024)* Set of 3 Cyclic 3G Servos: Please make sure model# located outside the servo casing near the servo arm says WK-02-1 (newer servos).

HM-4G6-Z-33B (HMXE2024)* Genuine Walkera new cyclic servo with 45mm wire. Please make sure model# located outside the servo casing near the servo arm says WK-02-1 (newer servos). Older 2008 servos with different model# match older 2008 main frames.

HM-4G6-Z-33C (HMXE2024)* Genuine Walkera new cyclic servo with 85mm wire. Please make sure model# located outside the servo casing near the servo arm says WK-02-1 (newer servos). Older 2008 servos with different model# match older 2008 main frames.

RX2610S factory settings are often incorrect and most vendors don't even know what the settings should be. Wow Hobbies will make the necessary corrections on the RX2610S & give you additional instructions so you won't run into a wall during installation.

Canopy for 4G6S, 4G6 & Novus 125 CP: Same as HM-4G6-Z-30 but with 4G6S lettering instead of 4G6.

Canopy for 4G6S, 4G6 & Novus 125 CP: Same as HM-4G6-Z-30 but with 4G6S lettering instead of 4G6.

Same specifications & dimensions applies to all stock blades shared by V120D02/03, M120D01, 4G6/S, 4G3, Novus 125 CP, Novus CP with cosmetic difference. This is also one of the official main blades used on the new M120D01.

Same specifications & dimensions applies to all stock blades shared by V120D02/03, M120D01, 4G6/S, 4G6, 4G3, Novus 125 CP, Novus CP with cosmetic difference. This is also the official main blades used on the new M120D01.

This Metalic Red V120D02 canopy can also be used on V120D01, 4G6S, 4G6, 4#6S, 4#6, 4#6 BELL, Novus 125 CP & Novus 125 FP. Metalic Red is a darker glossier red that is prefectly matched with the red metal hardware on you helicopter.

A sliver background compliments perfectly with chrome fixtures of the Walkera 4G6S. Then to maximized contrast, classic bold red stripes are accentuated by black borders for that slick luxurious finish on an angular design filled with sculpted details.

Looking for a highly visible and a stream line 4G6 canopy? This heavy duty crash resistant mustard yellow canopy includes rubber grommets and black & white decals. This canopy is customed to the Walkera 4G6 specifications with a weight for 4.1g.

This is the best head set you can ever put on your 4G6S, 4G6, 4G3 and Heli-Max Novus 125 CP, Novus CP.

This is the best head set you can ever put on your 4G6S, 4G6, 4G3 & Heli-Max Novus 125 CP, Novus CP. The stay-true head is made of extremely hard aerospace material & is virtually indestructible.

Although this 300mAh Lipo has a Walkera micro 1-cell-type connector, it's not for stock 1-cell helis. This is a 2-cell linear current battery with sustained 20C high output to enhance advantages of effortless 7.4V 2-cell 4G6, V120D02/01 & 4#6 performance.

As of June 15, 2010, the Turbo Ace 81220 (HP08-2) has been replaced by the updated and lighter weight Turbo Ace 71318 (HP07-2, Wow-07 Version) with higher KV (good for the RX2609 and excellent for the RX2610S on the 4G6S). Please get the 71318 instead!

These high performance rechargeable batteries are especially suited for 3D & outdoor endeavors. 600mAh & a high discharge rate of 20C (vs standard 12C) offer excellent peak performance & longer flight time than Walkera or Heli-Max Novus batteries.

4#3B-Z-42600 Battery (600mAh 20C 3.7V) for 4#3B,4G3, 4G6 & all Walkera 1-cell helicopters. It offers longer flight time than the stock Walkera and Heli-Max Novus 400mAh batteries for the Novus FP & CP (GPMP0408)* and fits into all 1cell battery cages.