This rugged Dual Turbo Ace Carrying Case provides ultimate protection for one V120D03/4G3 heli + one CB100/4#3B heli + Tx. Unlike typical aluminum cases, the Turbo Ace case is merticulously crafted from high gauge aluminum w/ a heavy duty handle.

One Phillips screwdriver for the micro Walkera helicopters size 000- Spindle handle and hardened tip. Improved optimum tip angel for a better fit on micro screws. The choice Phillips #000 screwdriver for Wow Hobbies technicians.

Set of 3 metal shims (super thin paper-weight washers)- Includes one 0.1mm , one 0.2mm and one 0.3mm thick shim with 6mm bore diameter. 2.9g motor and carbon stand/holder shown on photo are not included.

At 9.1g, this ultra light premium linear current battery features consistent 20C high output without parabolic degradation towards the latter part of the flight cycle. Reduced inertia is extremely beneficial for extreme 3D and accelerated sport flying.

Premium linear current battery features consistent 20C high output without parabolic degradation towards the latter part of the flight cycle. The #1 choice for professionals, It feels like a freshly charged battery all the way to the end of the flight!

The Turbo Ace Power House 31714 inrunner motor. This is a direct drop in plug and play motor for the 4G3. It generates an additional 400 RPM from stock motor running cool at 100% throttle. It is a taller engine at 25mm verses stock 22mm. Wt. only 13g

The all new Lethal-Power WOW-07 (formally named HP07-2) is here. It supersedes the 81220 in power and efficiency. It's custom to Wow Hobbies' specifications. Make sure that out-runner motor wires are soldered directly to ESC for consistent performance.

Includes Walkera battery and receiver plugs installed. This is the higher current brother of the common XP-7A Ebay ESC. It works with 1-3s applications and it's used mostly on the brushless main motor conversion to start outrunner brushless motor easier.

This is a special edition XP-7A-2 programmable ESC made to compatibility spec to both the outrunners/ inrunners w/Anti-cog outrunner firmware. Plug & play w/ Walkera connectors. It is ideal for upgrading to the lighter outrunner motors.

This balance charging cable adapter is used on a 3-cell charger (HM-CB180-Z-32 or B6 Charger - not included) to balance & charge 3 separate 1-cell batteries simultaneously. Other adapters will not provide a balanced charge on multiple 1-cell batteries.

Package include 4 short steel legs and 4 long steel legs, extremely durable for training purpose. Total weight with 4 short legs: 4.2g Total weight with 4 long legs: 5.8g

Customized to fit on Walkera transmitters, this Xtreme neck strap stabilizer bracket realigns the Tx to an optimum operating and viewing angle to ease arm, wrist & hand strain associated with holding and controlling the transmitter sticks simultaneously.

Not for V120D02S which has a larger diameter shaft than the V120D02

It's a hard to find the right kind of Thread Locking Adhesive that works and dries quick. Worse yet, certain thread locks are hard to dry.

Includes magnetic base, protective metal case only. This base requires a blade balancer attachment to be complete which is sold separately. Please make sure you get one that fit with the size of your blades.

The least expensive way to convert Novus FP, Walkera 4#3B & 4G3 to brushless. It uses your exiting RX2400/RX2406/RX2605 receiver to convert to brushless main. No soldering is required. CE701is a converter with a programmable Ebay ESC. Rx is not included.

Hot Rod Kit includes Turbo Ace 31714 & 2.9g BL motors, V-shaped tail holder, exclusive motor clamp, Walkera tail ESC, wire set, manual & no tail rotor. This custom kit provides exceptional 4G3 & Novus CP 3D performance and 4#3B & Novus FP wind tolerance.

3 sets of cutting edge Carbon Fiber Main Blades, designed for Walkera M120D01, V120D02/03/05, 4G6/S, 4G3 & Novus 125/CP helis, combine feather weight technology & carbon fiber strength to enhanced durability, ultra rigidity for extreme 3D performance.

Two of the same phillips screwdrivers for the micro Walkera helicopters size 000- Spindle handle and hardened tip. Improved optimum tip angel for a better fit on micro screws. The choice Phillips #000 screwdriver for Wow Hobbies technicians.

The 2.9g Turbo Ace 29700 BL motor with exclusive motor clamp is cleverly secured & removable from the Carbon C-Holder. This state of the art kit provides the 4G3 with stunning 3D performance over stocked 2g Walkera motor. Tail rotor is not included.

This unit charges 2-cell & 3-cell batteries and includes a charging cable adapter to balance charge three 1-cell Walkera batteries simultaneously. Other adapters will not provide a balanced charge on multiple 1-cell batteries. Batteries are not included.

Stock brush tail motors have limited power due to lower thrust & RPM and stock 2g brushless has no bearing which wears out easily. This is the only secured "Clip-On" (Not the "Glue-On") 2.9g double bearing version used to upgrade Walkera's tail motors.

HM-4G3-35+36+37+38: Buyer beware, there is a knock-off 4G3 head set for $19.95 with missing metal head block. Genuine Walkera Metal Head Set includes blade grips, head block, swash & bell mixer. 4G6's longer shaft (HM-4G6-Z-10) is not included.

HM-4G6-Z-09+4G3-Z-35+36+37: This genuine Walkera Metal Head Set includes new stronger blade grips, head block, swash & original 4G6/S aluminum bell mixer. 4G6's longer shaft (HM-4G6-Z-10) is not included.

HM-4#3B-Z-29: Charger for all Walkera & Novus 1-cell helicopters. Chargers features convenient "plug in the wall outlet" with operation that will automatically shut-off when the battery is fully charged and the LED indicator turns from red to green.

HM-4#3B-Z-33. This is the standard Walkera Brushless Motor with 12T pinion for 4#3A/B/Q, CB100, V100D01, 4G3, Novus FP/CP. Before you buy this motor, check out the rugged Turbo Ace 91416 (under the same category) which is lighter and a lot more powerful.

HM-4G6-Z-37600 Battery: (3.7v, 600mAh, 15C) fits perfectly in Walkera & Novus 1- cell helis & offers longer flight time than the stock 400-500mAh batteries. Please click on "More Info" to see the link for the ultimate "650mAh" high capacity battery.

HM-4G3-Z-01: Official Main Rotor Blades are integrated from high density foam & urethane film for 4G3, V120D02/03, M120D01, 4G6/S & Novus CP/125 CP to optimize weight & stiffness. These blades can be easily balanced to offers unparalleled 3D performance.

HM-4G3-Z-02: The Flybar is made of torque-resistant steel, a critical element of the main rotor mechanism. The Walkera 4G3, 4G6, 4G6S & the Novus CP, 125 CP helicopters share the same parts & components which are all made by Walkera.

HM-4G3-Z-03: High impact plastic Main Blades Holder/Grip Set stay true to form & function to keep main blades properly aligned even at extremely high rotations. The intended flexibility prevents damage or skewing of the rotational plain.

HM-4G3-Z-08: Swashplate Mechanism in a black plastic version for Walkera 4G3 & Heli-Max Novus CP is highly resilient to stress and retains excellent true alignment. There is also an upgraded Red Alum CNC Metal Version Available for this part.

HM-4G3-Z-09 is the 4G3, 4G6 & 4G6S Guide Ball which is the same as Novus CP & Novus 125 CP Flybar Pivot Assembly. They are the same exact part made by Walkera just with different stock numbers. This is a high quality 3 peice set made of stainless steel

HM-4G3-Z-10: This Rotor Head Block Assembly Set is made of high density PVC with matching screw cap and is fully compatible with 4G3 & Novus CP. There is an original Walkera CNC Metal Version which is an upgrade from this plastic version.

HM-4G3-Z-11: Walkera 4G3 & Helimax Novus CP helicopters uses the same main shaft. A useful tip in checking your old main shaft for damage is to roll it on a flat surface and see if the shaft is wably.

HM-4G3-Z-15: The newest version Servo Holder/Mount V2 Version (length=19.5mm) is for 4G3 & Novus CP released after January 2009. If you have a servo holder that is 18.4mm, it is the V1 servo holder which is not this item.

HM-4G3-Z-16: When installing the Main Gear for 4G3 & Novus CP you want to make sure the elevation and teeth depth is in aligned with the pinions on the main motor so that the gears mesh properly for even and smooth operation.

HM-4G3-Z-17: The Battery Frame Mount for 4G3 & Novus CP is designed to accommodate standard sized 1s battery packs but also allows for minor variations including high output and high capacity 10C-20C & 400-500mAh configurations.

HM-4G3-Z-18: This Tail Boom for 4G3 & Novus CP is made of carbon fiber to reduce weight while providing a rigid tail structure that won't slip due to it's square profile. This cool but simple improvement elliminates all tail alignment issues.

HM-4G3-Z-23: Tail Motor Holder/Mount for Walkera 4G3 & Heli-Max Novus CP

HM-4G3-Z-24 : Tail Motor Wire for 4G3, 4#3A, 4#3B, Novus CP & FP. Custom lenght wire plus connector assembled for your convenience.

HM-4G3-Z-25: Tail Rotor Blade for Walkera 4G3 & Helimax Novus is a commonly used spare part due to crashes that damages tail section.

HM-4G3-Z-26: Screw Set for 4G3 & Novus CP

HM-4G3-Z-31: Charger is shared between all micro 1s Walkera and Heli-Max Helicopter Models. The charger will automatically shut off upon charge completion and the LED indicator will turn from red to green. Charges any 1 cell Lipo 50 mAh to 1000 mAh.

HM-4G3-Z-32 (HMXE2024)* 3G Cyclic Servos is a newer version of servos: Please make sure model# located outside the servo casing near the servo arm says WK-02-1 (newer servos). Older 2008 servos with different model# match older 2008 main frames.

HM-4G3-Z-35: Aluminum CNC Metal Main Blades Holders/Grips for 4G3, 4G6, 4G6S & Novus CP, Novus 125 CP. Please also see the fully assembled Complete CNC Metal Head Set under HM-4G3-Z-35-36-37-38.

HM-4G3-Z-36: Genuine Walkera CNC Metal Rotor Head Block Set for 4G3, 4G6, 4G6S, Novus CP & Novus 125 CP. Please also check out the Complete CNC Metal Head Set under HM-4G3-Z-35-36-37-38.

This Walkera brushless motor is custom fitted with a 16 teeth pinion for more powerful 3D on Walkera 4G6, 4G3 & Novus CP. You can also use this powerful option on a 4#3B, CB100, Novus FP in combination with a brushless tail motor.

HM-4G3-Z-40 (HM-4#6-Z-33) (HMXM3005)* Main Brushless Electronic Speed Controller for 4G3 & Novus CP is the same as HM-4#3B-Z-34 for 4#3B/A. This ESC is used only with a brushless main motor. For brushless tail motor please use a tail ESC (HM-4G3-Z-43).

This is the newest version of the Walkera brushless receiver RX2605A which outputs brushless signals for the 4G3 and the Novus CP. To get the brushless upgrade you will also need the Main Brushless Motor & Main ESC.

HM-V120D03-Z-10 BL 2g Tail Motor with shaft keyed with flat area to lock V120D03/4G3 tail rotor. Ready to turn your 4G3 into a hot rod at 100% more lift? Click on "More Info" for additional 2.9g option and Turbo Ace Main Brushless Motor upgrade.

HM-4G6-Z-01 Black Main Rotor Blades are integrated from high density foam & urethane film for 4G6/S, 4G3, V120D02/03, M120D01& Novus CP optimize weight & stiffness. These high tech blades can be easily balanced to offers unparalleled 3D performance.

HM-4G6-Z-01-Black X 5: Save on 5 pairs of high quality and feather weight main blades that are perfect for 3D flights. These cool blades minimize damages to 4G6/S, 4G3, V120D02/03, M120D01 & Novus CP/125 CP main rotor mechanism during crashes.

HM-4G6-Z-02 (HM-4G3-Z-02): The Flybar is made of torque-resistant steel, a critical element of the main rotor mechanism. The Walkera 4G6, 4G3 & the Heli-Max Novus CP helicopters share many of the same parts & components which are all made by Walkera.

HM-4G6-Z-03 (HM-4G3-Z-04): The Walkera made the Flybar Steering Ball also know as the Heli-Max Flybar Bell Mixer Ball Carrier for the 4G6S, 4G6, 4G3 & Novus CP, Novus 125 CP.

HM-4G3-Z-37 : CNC Aluminum Swashplate for 4G3, 4G6, 4G6S & HeliMax Novus CP, Novus 125 CP. Please also look into the Complete CNC Metal Head Set listed under HM-4G3-Z-35-36-37-38.

Same as HM-4G3-Z-38 except in chrome finish intead of red. The Ball Linkage/Mixer arms that come with the HM-4G3-Z-38 is not included in the 4G6-Z-09 package.

HM-4G6-Z-11: Sometimes a crash results in a bent Feathering Shaft/Spindle which is a common causes of gyration. With some experience, you can analyze this problem by looking for any inconsistency in the extended angle of the main blades.

HM-4G6-Z-33 (HMXE2024)* Set of 3 Cyclic 3G Servos: Please make sure model# located outside the servo casing near the servo arm says WK-02-1 (newer servos).

HM-CB100-Z-26-3PLUGS Brushless Main Electronic Speed Controller (ESC) is used only with a brushless main motor. For brushless tail motor please use a Brushless Tail ESC (HM-CB100-Z-27).

HM-CB100-Z-26 Main ESC (Electroic Speed Controller) is used in conjunction with a brushless main motor. For brushless tail motor please use the Tail ESC (HM-CB100-Z-27).

HM-CB100-Z-27 (HM-4#3B-Z-38, HM-4G3-Z-43) Walkera Tail ESC/Converter: This Electronic Speed Controller also makes quick brushless tail signal conversions that is not provided by the brushless RX2406A/B or RX2400BL receivers with only BL main signals.

HM-V120D03-Z-09 Walkera BL Main Motor, WK-WS-12-003, 12T. If you are upgrading the 4G3, 4#6/S/BELL, V120D01/03, Novus CP/FP/125 FP please also consider the far superior & lighter Turbo Ace 71316 with rave reviews on its extraordinary power.

HM-V120D03-Z-10 BL 2g Tail Motor with shaft keyed with flat area to lock V120D03/4G3 tail rotor. Ready to turn your V120D03 to a hot rod at 100% more lift? Click on "More Info" for additional 2.9g option and Turbo Ace Main Brushless Motor upgrade.

Center hole of this 18T pinion fits the 1.5mm shaft of the Walkera BL main motor, Feigao 12mmx20mm main motor, Losi 10,250kv or any motor with 1.5mm shaft. The pitch of this pinion matches the Walkera 4#3A, 4#3B, 4#3Q, 4G3, Novus FP & CP Main Gear.

Fits all 4mm applications and the Walkera 4G3, 4G6, 4G6S, 4#6, 4#6Bell, 4F200, 4F180, V120D01, V120D02, CB180, CB180Z, UFLYS, V200D01, V200D02, Novus 125 CP, Novus 125 FP and Novus CP main blade holding nut.

Radio transmitter hands free neck strap. Total length 45 inches.

Compatible to all the latest 3 axis Walkera & Heli-Max Novus receivers such as RX2433, RX2435, RX2437S, RX2610S & Heli-Max Novus equivalents.