This unit charges 2-cell & 3-cell batteries and includes a charging cable adapter to balance charge three 1-cell Walkera batteries simultaneously. Other adapters will not provide a balanced charge on multiple 1-cell batteries. Batteries are not included.

This balance charging cable adapter is used on a 3-cell charger (HM-CB180-Z-32 or B6 Charger - not included) to balance & charge 3 separate 1-cell batteries simultaneously. Other adapters will not provide a balanced charge on multiple 1-cell batteries.

Now features adjustable height. Designed by seasoned pilots, the ultimate stronger & lighter carbon tail stand & fin set in the market. A narrower horizontal fin prevents blade strikes plus 2 critical screws to secure the tail block. Includes tail blades.

This is a version 2 of the 915 model with strict Wow Hobbies quality assurance. Plug and play with pinion, no soldering required. It is an even more potent upgrade than the coveted HP08- Turbo Ace 81220. Excellent startup with Walkera stock ESC.

At 9.1g, this ultra light premium linear current battery features consistent 20C high output without parabolic degradation towards the latter part of the flight cycle. Reduced inertia is extremely beneficial for extreme 3D and accelerated sport flying.

Premium linear current battery features consistent 20C high output without parabolic degradation towards the latter part of the flight cycle. The #1 choice for professionals, It feels like a freshly charged battery all the way to the end of the flight!

Use either 4 short or 4 long steel legs (both included) in this stabilizing and shock absorbing design to greatly reduce damages to your precious helicopter during pilot training. Total weight with 4 short legs: 4.4g, Total weight with 4 long legs: 6g

You can effortlessly prolong battery life by frequently checking its voltage. Measuring 1-cell for Walkera/Novus and 3-6 cell for Trex450/600 helis, this one step plug & test meter is accurate and much easier to use than most cumbersome voltage meters.

Includes Walkera battery and receiver plugs installed. This is the higher current brother of the common XP-7A Ebay ESC. It works with 1-3s applications and it's used mostly on the brushless main motor conversion to start outrunner brushless motor easier.

XP-12A-2 version 2 with improved firmware that gives outrunner 5-8% additional head speed (power boost). It wakes up the old HP08 and retains the same flight time. Includes Walkera battery, receiver and motor plugs installed. It is plug and play.

This is a special edition XP-7A-2 programmable ESC made to compatibility spec to both the outrunners/ inrunners w/Anti-cog outrunner firmware. Plug & play w/ Walkera connectors. It is ideal for upgrading to the lighter outrunner motors.

This balance charging cable adapter is used on a 3-cell charger (HM-CB180-Z-32 or B6 Charger - not included) to balance & charge 3 separate 1-cell batteries simultaneously. Other adapters will not provide a balanced charge on multiple 1-cell batteries.

Due to air shipping specs, all 4 bottles are 20% - 25% filled (about a quarter of a bottle) to prevent messy air shipping spills. We have adjusted the price accordingly so you will have a little bit of glue, lock, grease & adhesive for a few bucks.

This pitch scale is a wider design that measures +15 to -15 degrees Instead of the typical +12 to -12 degrees. Contrasting orange scale & deep blue pointer with a larger finger friendly low increment knob makes it easy to see and make minute adjustments.

Customized to fit on Walkera transmitters, this Xtreme neck strap stabilizer bracket realigns the Tx to an optimum operating and viewing angle to ease arm, wrist & hand strain associated with holding and controlling the transmitter sticks simultaneously.

It's a hard to find the right kind of Thread Locking Adhesive that works and dries quick. Worse yet, certain thread locks are hard to dry.

We include exclusive Wow Instructions and adjustments with this MicroHeli Part.

We included custom Wow instructions for you to make the necessary adjusmentss on this MicroHeli part to optimize performance.

Not just for looks, this precision aluminum CNC metal servo horn offers ultra stiff characteristic for fast and responsive swashplate movement. While plastic horns often breaks before servos, metal horns will easily out-last the helicopter's life span.

HM-4#3B-Z-29: Charger for all Walkera & Novus 1-cell helicopters. Chargers features convenient "plug in the wall outlet" with operation that will automatically shut-off when the battery is fully charged and the LED indicator turns from red to green.

HM-4#3B-Z-34 (HMXM3005)* Main ESC or Electronic Speed Controller for the Main Motor which is different than the ESC for the Tail Motor. For brushless tail motor please use the Tail ESC (HM-4#3B-Z-38).

Center hole of this 14T pinion fits the 1.5mm shaft of the Walkera BL main motor, Feigao 12mmx20mm main motor, Losi 10,250kv or any motor with 1.5mm shaft. The pitch of this pinion matches the 4#3A, 4#3B, 4#3Q , 4G3, Novus FP & CP Main Gears.

Now shipping newest version 3 as shown on photo. This version of the skid has been upgraded to stronger plastic material that resists crashes.

If you are having a rough time hovering your 4#6/S or Novus 125 FP, this easy upgrade will make a huge difference in stability for beginner pilots. The 45 degree bell structure acts as a gryoscope that resist any sudden shift in the main rotating axis.

Upgrade your 4#6 BELL to 3-Axis Gyro with the RX2433. Wow Hobbies is the only vendor to supply custom instruction manual for RX2433 upgrade and we have tested the RX2433 upgrades on several models so that you won't feel like you are working in the blind.

HM-4G3-Z-31: Charger is shared between all micro 1s Walkera and Heli-Max Helicopter Models. The charger will automatically shut off upon charge completion and the LED indicator will turn from red to green. Charges any 1 cell Lipo 50 mAh to 1000 mAh.

HM-4G3-Z-39 (HM-4#3B-Z-33) Walkera BL Main Motor, WK-WS-12-003, 12T. If you are upgrading the 4G3, 4#6/S/BELL, V120D01/03, Novus CP/FP/125 FP please also consider the far superior & lighter Turbo Ace 71316 with rave reviews on its extraordinary power.

Now shipping newest version as shown on photo. This version of the skid has been upgraded to stronger plastic material that resists crashes.

HM-4G6-Z-33B (HMXE2024)* Genuine Walkera new cyclic servo with 45mm wire. Please make sure model# located outside the servo casing near the servo arm says WK-02-1 (newer servos). Older 2008 servos with different model# match older 2008 main frames.

HM-4G6-Z-33C (HMXE2024)* Genuine Walkera new cyclic servo with 85mm wire. Please make sure model# located outside the servo casing near the servo arm says WK-02-1 (newer servos). Older 2008 servos with different model# match older 2008 main frames.

HM-4G6-Z-36 is the Main ESC that controls the main motor which is different than the Tail ESC.

HM-CB100-Z-26-3PLUGS Brushless Main Electronic Speed Controller (ESC) is used only with a brushless main motor. For brushless tail motor please use a Brushless Tail ESC (HM-CB100-Z-27).

HM-M120D01-Z-27 Set of 3 Cyclic 3G Servos: Please make sure model# located outside the servo casing near the servo arm says WK-02-1 (newer servos).

Cool Blue reflections on contrasting Galaxy Black enhances the high tech image of the Walkera 4G6S & 4#6S. This space odyssey inspiration marks the start of a new and exciting adventure. Decals & rubber grommets are included with a total weight of 4.1g.

Looking for a highly visible and a stream line 4G6 canopy? This heavy duty crash resistant mustard yellow canopy includes rubber grommets and black & white decals. This canopy is customed to the Walkera 4G6 specifications with a weight for 4.1g.

Center hole of this 16T pinion fits the 1.5mm shaft of the Walkera BL main motor, Feigao 12mmx20mm main motor, Losi 10,250kv or any motor with 1.5mm shaft. The pitch of this pinion matches the Walkera 4#3A, 4#3B, 4#3Q, 4G3, Novus FP & CP Main Gear.

Center hole of this 18T pinion fits the 1.5mm shaft of the Walkera BL main motor, Feigao 12mmx20mm main motor, Losi 10,250kv or any motor with 1.5mm shaft. The pitch of this pinion matches the Walkera 4#3A, 4#3B, 4#3Q, 4G3, Novus FP & CP Main Gear.

Fits all 4mm applications and the Walkera 4G3, 4G6, 4G6S, 4#6, 4#6Bell, 4F200, 4F180, V120D01, V120D02, CB180, CB180Z, UFLYS, V200D01, V200D02, Novus 125 CP, Novus 125 FP and Novus CP main blade holding nut.