
	Your cart is empty.


	Email Address:

Email Address:

Password:

You will be prompted to enter your password on the next page

Create an account
Forgot Password?

Walkera 4#6 Bell Parts

Displaying products 1 - 144 of 144 results	Show:	Sort:

Turbo Ace Linear CG Battery 650mAh 2S (7.4V) 25C LiPo: For Upgraded Walkera 4G6S, 4#6S/BELL, V120D01/02/03/05 & M120D01, Devo7E Not for Stock WK Helis Price: $19.95 Quantity: Not for stock Walkera heli. Manufactured by the same Linear battery factory, the 650mAh is now available using the same process and technology as the 400mAh Linear battery. It provides the greatest CG adjustment (1.2 inch) inside the Walkera battery cage.	XP-12A-2 (VER 2) EBAY BL ESC 1-2 Cell. Increases head speed by 5%-8% and upgrades 1 & 2 Cell Helis (e.g. M120D01, V120D02/S/03/05/01, 4G6/S, 4#6/S) Retail: $34.95 Price: $19.95 You Save: $15.00 (43 %) Quantity: XP-12A-2 version 2 with improved firmware that gives outrunner 5-8% additional head speed (power boost). It wakes up the old HP08 and retains the same flight time. Includes Walkera battery, receiver and motor plugs installed. It is plug and play.	Walkera WK-2403 Transmitter: 2.4GHz, 4-Channels, Dual Rate & Height Limit Dial/Switches, For Walkera & Novus Fix-Pitch & Co-Axial Helicopter Price: Sale $19.95 (Reg 39.95 at 50% off) Quantity: The Walkera WK-2403 is compatible with all Walkera and Novus 4 channel 2.4gHz helicopters.	Turbo Ace Super Capacity Battery 650mAh 1S (3.7V) 20C LiPo (2-Pack): 15-20% More Output & Capacity for Peak Formance & Extended Flight Time Price: $14.95 Quantity: Turbo Ace Super Capacity 650mAh Battery, designed to fit the Walkera 4G3/6/S, 4#6/S/BELL, CB100 & the V120 Series, will extend your flight time. Higher 20C high output increases power for more extreme maneuvers in both sport flying and 3D flight.
Turbo Ace Super Capacity Battery 650mAh 1S (3.7V) 20C LiPo: Walkera Connector, 15-20% More Output & Capacity for Peak Formance & Extended Flight Time Price: $7.95 Quantity: Dimensions and micro connector fits 4#3/A/B/Q, 4G3/6/S, 4#6/S/Bell, CB100, V120D##, Novus CX/FP/CP. This little dynamo will bring new and exciting energy to your high performance Walkera helis with brushless motors & Turbo Hot Rod upgrades.	TAL-PP-4G6-2992: Upgrade Balanced Carbon Tail Blades for Walkera 4G6/S,4#6/S/BELL,V120D01/02 & Novus 125 CP/FP Price: Sale $13.95 (Reg. $21.95) Quantity: Upgrade Carbon Tail Blades with 12% more surface area than stock 4G6S tail blades for added tail authority.	Balance Charger with 2-Cell, 3-Cell & 1-Cell Balance Charging Cable Adapter for Charging Three 1-Cell Batteries Simultaneously Price: $22.95 Quantity: This unit charges 2-cell & 3-cell batteries and includes a charging cable adapter to balance charge three 1-cell Walkera batteries simultaneously. Other adapters will not provide a balanced charge on multiple 1-cell batteries. Batteries are not included.	WWG-JH-MMM: Balance Charging Cable Adapter for Charging 3 Separate 1-Cell Walkera&Novus Batteries Simultaneously, for HM-CB180-Z-32-93 & B6 Charger Price: $4.95 Quantity: This balance charging cable adapter is used on a 3-cell charger (HM-CB180-Z-32 or B6 Charger - not included) to balance & charge 3 separate 1-cell batteries simultaneously. Other adapters will not provide a balanced charge on multiple 1-cell batteries.
Turbo Ace 915-14 Version 2- Brushless Motor W/14T Pinion (TA915-14) 9g:Lethal-Power Upgrade,For V120D02, 4G6, 4#6, 4#6Bell, V120D01 & Novus 125 FP Price: $44.95 This is a version 2 of the 915 model with strict Wow Hobbies quality assurance. Plug and play with pinion, no soldering required. It is an even more potent upgrade than the coveted HP08- Turbo Ace 81220. Excellent startup with Walkera stock ESC.	WWD-PP-4G6-20-93: (SH-4G6-TAIL)The Stay-True Upgrade Titanium Tail Driven Shaft for 4G6S, 4G6, 4#6S, 4#6, 4#6 BELL, V120D01, V120D02 & Novus 125 CP/FP Price: $18.50 The famous Stay True brand titanium tail driven shaft. This titanium shaft is virtually indestructible ! It is practically indestructable and increases tail response time. Supply is limited on this run, order yours today.	TAL-PP-4G6-2992 + TAL-PP-4G6-2491: Upgrade Carbon Fiber Tail Blades+Stand+Fin,Adjustable Height for 4G6/S,4#6/S/BELL,V120D01/02/S & Novus 125 CP/FP Price: $29.95 Quantity: Now features adjustable height. Designed by seasoned pilots, the ultimate stronger & lighter carbon tail stand & fin set in the market. A narrower horizontal fin prevents blade strikes plus 2 critical screws to secure the tail block. Includes tail blades.	Turbo Ace 81200 (HP08-S lastest version Without Pinion) Brushless Motor: Exceptionally High Performance 16,500kv Brushless Motor Price: $44.95 Quantity: The newest Thermo Cool Turbo Ace 81200 (HP08) for Walkera with more torque and lighter weight than the stock Walkera BL 4G6 motor. 81200 is the same motor as the 81220 except the 81200 has no pinion. 81200 motor wires must be soldered directly to the ESC
Newest Phillips Micro Screwdriver: #000 Size Hardened Tip, Swivel Press Handle, Improved Optimum Tip Angle for a Better Fit on Micro Screws Price: $5.95 Quantity: One Phillips screwdriver for the micro Walkera helicopters size 000- Spindle handle and hardened tip. Improved optimum tip angel for a better fit on micro screws. The choice Phillips #000 screwdriver for Wow Hobbies technicians.	Training Gear Set: 4 Extended Legs For Walkera V120D01/02/03, 4G6/S, 4#6/S/BELL, Heli-Max Novus 125 CP/FP, Navy Blue Color Price: $6.95 Quantity: Use either 4 short or 4 long steel legs (both included) in this stabilizing and shock absorbing design to greatly reduce damages to your precious helicopter during pilot training. Total weight with 4 short legs: 4.4g, Total weight with 4 long legs: 6g	Turbo Ace Battery Meter: 16C Measures 1-6 Cell Lipo, Measures 2.8V-25.2V For All RC Helicopters Retail: $11.95 Price: $6.95 You Save: $5.00 (42 %) Quantity: You can effortlessly prolong battery life by frequently checking its voltage. Measuring 1-cell for Walkera/Novus and 3-6 cell for Trex450/600 helis, this one step plug & test meter is accurate and much easier to use than most cumbersome voltage meters.	Turbo Ace Lipo Battery Voltage Meter With Programmable Buzzer Alarm : Measures 1-6 Cell Lipo Batteries, 2.8V-25.2V, For All Helicopters Price: $9.95 Quantity: This is a battery meter with built-in low voltage alarm can also be installed on board helicopters. At low voltages, a led will light up and the double buzzers will also sound a warning for pilots who are too far from the helicopter to prevent crashes.
UNIVERSAL Dual Capacity Helicopter Case: Heavy Gauge Aluminum, Custom Cut-Out For One 250/300 + One Micro/Sub-Micro + Tx + Parts/Tools Price: $49.95 Quantity:	XP-12A (XP-12A-1) Version 1 EBAY BL ESC: Includes Walkera battery and receiver plugs but without motor plugs as shown on photo Price: $19.95 Quantity: Includes Walkera battery and receiver plugs installed. This is the higher current brother of the common XP-7A Ebay ESC. It works with 1-3s applications and it's used mostly on the brushless main motor conversion to start outrunner brushless motor easier.	XP-7A-2 EBAY BL 1-2 Cell ESC: Compatible to Outrunner Motors for Upgrading 1 & 2 Cell Helis (e.g. V120D02/03/01, 4G6/S, 4#6/S) + Liadon & Nataku) Price: $24.95 Quantity: This is a special edition XP-7A-2 programmable ESC made to compatibility spec to both the outrunners/ inrunners w/Anti-cog outrunner firmware. Plug & play w/ Walkera connectors. It is ideal for upgrading to the lighter outrunner motors.	XTM-EA-057: Balance Charging Cable Adapter for Charging 3 Separate 1-Cell Walkera & Novus Batteries Simultaneously for HM-CB180-Z-32-93 & B6 Chargers Price: $4.95 Quantity: This balance charging cable adapter is used on a 3-cell charger (HM-CB180-Z-32 or B6 Charger - not included) to balance & charge 3 separate 1-cell batteries simultaneously. Other adapters will not provide a balanced charge on multiple 1-cell batteries.
XTM-W46006: Training Gear for Walkera 4#6 and 4G6 Price: $7.90 Quantity:	MG Power Transmitter Battery 2200mAh 3S Lipo: JST, For Walkera WK2401/2/3, WK2601/2/3, WK2801/Pro, Devo7,& 10 Price: $24.00 Quantity: It's time to retire those old "AA" batteries. This is the smartest new solution to charge up your Walkera transmitter radio. No more guess work on 8 "AA" batteries with iffy connections in a tray. Everything is consolidated into one simple reliable unit.	Glue & Lube Set: CA Strong Bond Glue, Thread Lock, Grease & Anaerobics Steel Bonding Adhesive - Bottles are 20% - 25% filled. (Not full bottle). Price: $4.95 All 4 bottles are only 20%-25% full Quantity: Due to air shipping specs, all 4 bottles are 20% - 25% filled (about a quarter of a bottle) to prevent messy air shipping spills. We have adjusted the price accordingly so you will have a little bit of glue, lock, grease & adhesive for a few bucks.	XTM-EA-036-WKR: Xtreme Neck Strap Stabilizer for Walkera Transmitters, Realigns transmitter to comfortable handling & viewing position Price: $9.90 Quantity: Customized to fit on Walkera transmitters, this Xtreme neck strap stabilizer bracket realigns the Tx to an optimum operating and viewing angle to ease arm, wrist & hand strain associated with holding and controlling the transmitter sticks simultaneously.
ASC1596: Thread Locking Adhesive, Prevent Screws Coming Loose from Vibration, Blue Thread Lock for "Easy to See" Applicaton Price: $4.85 Quantity: It's a hard to find the right kind of Thread Locking Adhesive that works and dries quick. Worse yet, certain thread locks are hard to dry.	XTM-EA-038-G: Magnetic Blade Balancer, Golden Color (You need to buy a Blade Balancer Attachment that fits with your blade hole size. - Not Included) Price: $13.95 Quantity: Includes magnetic base, protective metal case only. This base requires a blade balancer attachment to be complete which is sold separately. Please make sure you get one that fit with the size of your blades.	XTM-EA-038-G+EA038-A-V2: Magnetic Blade Balancer (Gold Color) Including Attachment for Walkera 4G6/4#6/CB100/4#3B/4G3 & Other Micro Helicopters Price: $21.85 Includes 2 longer screws not available in older version Quantity: This complete set includes magnetic base, protective metal case and micro blade balancer attachment to balance main blades for micro and super micro helicopoter. Compatible for models from Walkera, E-flite, Align T-Rex 100, Novus, Nine Eagle and etc.	XTM-EA-038-S+EA038-A-V2: Magnetic Blade Balancer (Silver Color) Including Attachment for Walkera 4G6/4#6/CB100/4#3B/4G3 & Other Micro Helicopters Price: $21.85 Includes 2 longer screws not available in older version Quantity: This complete set includes magnetic base, protective metal case and micro blade balancer attachment to balance main blades for micro and super micro helicopoter. Compatible for models from Walkera, E-flite, Align T-Rex 100, Novus, Nine Eagle and etc.
950mAh 7.4V 25C with Red JST Plugs For Walkera Helicopters (Not for Stock Helicopter) Price: $15.90 Quantity:	Newest Phillips Micro Screwdriver (Set of 2): #000 Size Hardened Tip, Swivel Press Handle, Improved Tip Angle, Better Fit on Micro Screws Price: $10.95 Quantity: Two of the same phillips screwdrivers for the micro Walkera helicopters size 000- Spindle handle and hardened tip. Improved optimum tip angel for a better fit on micro screws. The choice Phillips #000 screwdriver for Wow Hobbies technicians.	Balance Charger for 2-Cell, 3-Cell & 1-Cell Balance Charging Cable Adapter for Charging Three 1-Cell Batteries Simultaneously Price: $27.95 Quantity: This unit charges 2-cell & 3-cell batteries and includes a charging cable adapter to balance charge three 1-cell Walkera batteries simultaneously. Other adapters will not provide a balanced charge on multiple 1-cell batteries. Batteries are not included.	Turbo Ace 71316 Brushless Motor: (HP07-2, WOW-7 Version), Lethal-Power Upgrade, 16T Brass Pinion Installed for 4#6, 4#6S, 4#6 Bell & Novus 125 FP Price: $42.95 The all new Lethal-Power 71316 (HP07-2, WOW-7 Version) is here. It supersedes the 81220 in power and efficiency. It's custom to Wow Hobbies' specifications. Make sure that out-runner motor wires are soldered directly to ESC for consistent performance.
MHE-MH-4G6025 + Wow Instructions: MicroHeli Upgrade CNC Metal Tail Case for 4G6/S, 4#6/S/BELL, V120D01/02 & Novus 125 CP/FP Price: $17.99 Quantity: We include exclusive Wow Instructions and adjustments with this MicroHeli Part.	MHE-MH-4G6026: MicroHeli Upgrade Precision CNC Bell Crank (Tail Blade Rocker) for 4G6/S, 4#6/S/BELL, M120D01, V120D02/1 & Novus 125 CP/FP Price: $14.99 Quantity:	MHE-MH-4G6142: MicroHeli Upgrade Precision CNC Tail Rotor Assembly for 4G6/S, 4#6/S/BELL, V120D02/01 & Novus 125 CP/FP Price: $20.99 Quantity:	MHE-MH-4G6193 + Wow Instructions: MicroHeli CNC Metal Pitch Slider For 4G6, 4#6/S/BELL, M120D01, V120D02/01 & Novus 125 CP/FP Price: $10.99 Quantity: We included custom Wow instructions for you to make the necessary adjusmentss on this MicroHeli part to optimize performance.
MHE-MH-4G6S193 + Wow Instructions: MicroHeli CNC Metal Pitch Slider For 4G6/S, 4#6/S/BELL, M120D01, V120D01/02 & Novus 125 CP Price: $12.99 Quantity: Some minor adjustments are required and we include exclusive Wow instructions with this MicroHeli upgrade part.	TAL-PP-4G6-2491: Upgrade Carbon Tail Stand + Fin + Screws: Adjustable Height for Walkera 4G6/S,4#6/S/BELL,V120D01/02 & Novus 125 CP/FP Price: Sale $10.95 (Reg. $19.95) Quantity: Designed by seasoned pilots, this is ultimate stronger & lighter carbon tail stand & fin set. A slightly taller tail stand for better blades clearance & a narrower horizontal fin prevents blade strikes plus 2 critical screws to secure the tail block.	XTM-EA-014-3: Foam Main Blade Holder by Xtreme for Micro to 120 Sized Helicopters Price: $2.60 Quantity:	XTM-EA-014-4: Main Blade Holder (for 4G6,4#6,V120D01,V120D02.V120D02S,MCPX) Price: $2.60
XTM-W46001: Carbon Fiber Frame for Walkera 4#6/S/BELL, 4G6/S, V120D01/02 & Novus 125 FP / 125 CP Price: $47.50 Quantity:	XTM-W46001-A: Swash Guide and Receiver Plate (Spare for W46001) for Walkera 4#6/S/BELL, 4G6/S, V120D01/02 & Novus 125 FP / 125 CP Price: $3.29 Quantity:	XTM-W46001-B: Graphite Side Frame (Spare for W46001) for Walkera 4#6/S/BELL, 4G6/S, V120D01/02 & Novus 125 FP / 125 CP Price: $8.40 Quantity:	XTM-W46001-C: XtremeBall Bearing Set (spare for W46001) for Walkera 4#6/S/BELL, 4G6/S, V120D01/02 & Novus 125 FP / 125 CP Price: $4.72 Quantity:
XTM-W46001-D: Motor Mount (Spare for W46001) for Walkera 4#6/S/BELL, 4G6/S, V120D01/02 & Novus 125 FP / 125 CP Price: $8.40 Quantity:	XTM-W46001-E: Front Servo Mount (Spare for W46001) for Walkera 4#6/S/BELL, 4G6/S, V120D01/02 & Novus 125 FP / 125 CP Price: $5.30 Quantity:	XTM-W46001-F: Upper main Shaft Block (Spare for W46001) for Walkera 4#6/S/BELL, 4G6/S, V120D01/02 & Novus 125 FP / 125 CP Price: $8.40 Quantity:	XTM-W46001-G: Lower Main Shaft Block (Spare for W46001) for Walkera 4#6/S/BELL, 4G6/S, V120D01/02 & Novus 125 FP / 125 CP Price: $7.36 Quantity:
XTM-W46001-H: Tail Boom Mount (Spare for W46001) for Walkera 4#6/S/BELL, 4G6/S, V120D01/02 & Novus 125 FP / 125 CP Price: $10.43 Quantity:	XTM-W46001-I: Screw Set (Spare for W46001) for Walkera 4#6/S/BELL, 4G6/S, V120D01/02 & Novus 125 FP / 125 CP Price: $2.08 Quantity:	XTM-W46002: Metal Tail Unit for Walkera 4#6S, 4#6Bell, 4G6, V120D01/02 (Discontinued) Price: $16.89	XTM-W46009: Xtreme Landing Skid & Battery Mount Upgrade for Walkera 4#6/S/BELL, 4G6/S, V120D01/02/02S & Novus 125 FP, 125 CP Price: $9.50
XTM-W46009-A: Xtreme Skid and Plastic Parts Spare for W46009 ( Walkera 4#6/S/BELL, 4G6/S, V120D01/02/02S & Novus 125 FP, 125 CP) Price: $3.30	XTM-W46009-B: Xtreme Graphite Mount Spare for W46009 ( Walkera 4#6/S/BELL, 4G6/S, V120D01/02/02S & Novus 125 FP, 125 CP) Price: $3.89 Quantity:	XTM-W46009-C: Xtreme Skid Pipes Spare for W46009 ( Walkera 4#6/S/BELL, 4G6/S, V120D01/02/02S & Novus 125 FP, 125 CP) Price: $3.89 Quantity:	XTM-W46009-D: Xtreme Rubber Rings & Screws Spare for W46009 ( Walkera 4#6/S/BELL, 4G6/S, V120D01/02/02S & Novus 125 FP, 125 CP) Price: $2.60 Quantity:
XTM-W46012: Xtreme Metal Servo Horn for 4G6/S, 4#6/S/BELL, V120D01/2/3/5, M120D01 & Novus 125 CP/FP Price: $5.90 Quantity: Not just for looks, this precision aluminum CNC metal servo horn offers ultra stiff characteristic for fast and responsive swashplate movement. While plastic horns often breaks before servos, metal horns will easily out-last the helicopter's life span.	HM-4#3B-Z-29 (HM-4G3-Z-31, HM-CB100-Z-21): Charger for Walkera 1-S (3.7V) Lama2-1, 4# & 4G Series, CB100, V100 & V120, M120 & Novus 125/CP/FP/CX Price: $6.95 (Same as HM-4G3-Z-31) Quantity: HM-4#3B-Z-29: Charger for all Walkera & Novus 1-cell helicopters. Chargers features convenient "plug in the wall outlet" with operation that will automatically shut-off when the battery is fully charged and the LED indicator turns from red to green.	HM-4#3B-Z-34 (WK-WST-10A-L) (HMXM3005)* Main Electronic Speed Controller for 4#3/B, 4G3, 4#6/S/BELL, V100D01, V120D01 & Novus FP/125FP/CP Price: $19.95 Quantity: HM-4#3B-Z-34 (HMXM3005)* Main ESC or Electronic Speed Controller for the Main Motor which is different than the ESC for the Tail Motor. For brushless tail motor please use the Tail ESC (HM-4#3B-Z-38).	HM-4#6(BE)-Z-01: Flybar Set for Walkera 4#6 BELL Retail: $2.03 Price: $1.62 You Save: $0.41 (20 %) Quantity:
HM-4#6(BE)-Z-02: Flybar Connector for Walkera 4#6 BELL Price: $1.95 Quantity:	HM-4#6(BE)-Z-03: Main Blades Holder for Walkera 4#6 BELL Price: $5.95 Quantity:	HM-4#6(BE)-Z-04: Rotor Head Set for Walkera 4#6 BELL Price: $9.95 Quantity:	HM-4#6(BE)-Z-05: Ball Linkage Set for Walkera 4#6 BELL Price: $5.95 Quantity:
HM-4#6(BE)-Z-06: Bearing Set for Walkera 4#6 BELL Price: $9.95 Quantity:	HM-4#6(BE)-Z-07: Screw Set for Walkera 4#6 BELL Price: $1.45 Quantity: Need http://www.wowhobbies.com/hm-46-z-01mainrotorbladesforwalkera46-6-1-1.aspx to complete the entire screw set for the 4#6BELL	HM-4#6(BE)-Z-08: Main Shaft for Walkera 4#6, 4#6S, 4#6 BELL & V120D01 Retail: $4.85 Price: $3.88 You Save: $0.97 (20 %) Quantity:	HM-4#6(BE)-Z-09: Blade Controller for Walkera 4#6 BELL Price: $6.95 Quantity:
HM-4#6-Z-01: Main Rotor Blades for Walkera 4#6, 4#6S, 4#6 BELL & Novus FP Price: $3.40 Quantity:	HM-4#6-Z-09 (HM-4G6-Z-12): Tail Shaft for Walkera 4G6S, 4G6, 4#6S, 4#6, 4#6 BELL, V120D01, V120D02 & Novus 125 CP/FP Price: $2.95 Quantity:	HM-4#6-Z-10 (HM-4G6-Z-13): Fixed Sleeve Set for Walkera 4G6S, 4G6, 4#6S, 4#6, 4#6 BELL, V120D01, V120D02 & Novus 125 CP/FP Price: $2.50	HM-4#6-Z-11 (HM-4G6-Z-14): Holder Frame for Walkera 4G6S, 4G6, 4#6S, 4#6, 4#6 BELL, V120D01, V120D02 & Heli-Max Novus 125 CP/125 FP Price: $1.95 Quantity:
HM-4#6-Z-12 (HM-4G6-Z-15): Main Frame for Walkera 4G6S, 4G6, 4#6S, 4#6, 4#6BELL, V120D01, V120D02 & Heli-Max Novus 125 CP/FP Price: $5.95 Quantity:	HM-4#6-Z-13 (HM-4G6-Z-16) New Version 3: Updated Skid Landing, Strong/Sporty For Walkera 4G6S, 4G6, 4#6S, 4#6/BELL, V120D01, V120D02 & Novus 125 CP/FP Price: $2.95 Now shipping newest version 3 as shown on photo. This version of the skid has been upgraded to stronger plastic material that resists crashes.	HM-4#6-Z-14 (HM-4G6-Z-17): Servo Holder for Walkera 4G6S, 4G6, 4#6S, 4#6 BELL & Heli-Max Novus 125 CP, Novus 125 FP Price: $2.75 Replacement HM-4G6-Z-17	HM-4#6-Z-15 (HM-4G6-Z-18): Main Gear Set for Walkera 4G6S, 4G6, 4#6S, 4#6/BELL, V120D01, V120D02 & Heli-Max Novus 125/CP/FP Price: $5.00
HM-4#6-Z-16 (HM-4G6-Z-19): Transmission Gear Set for Walkera 4G6/S, 4#6/S/BELL, M120D01, V120D01/2 & Heli-Max Novus 125 CP/FP Price: $3.95 Equivalent part is HM-4G6-Z-19 HM-4#6-Z-16 (HM-4G6-Z-19): Set of 3 Tail Transmission Gears is made of high impact plastic. Because these parts operate at high speeds with intense stress it will be a good idea to stock extras on your shelf.	HM-4#6-Z-17 (HM-4G6-Z-20): Tail Driven Shaft for Walkera 4G6S, 4G6, 4#6S, 4#6/BELL, V120D01, V120D02 & Heli-Max Novus 125 CP/FP Price: $2.35 Quantity: Keyed Carbon Tail Drive Shaft	HM-4#6-Z-18 (HM-4G6-Z-21): Tail Boom for Walkera 4G6S, 4G6, 4#6S, 4#6/BELL, V120D01, V120D02 & Heli-Max Novus 125 CP/FP Price: $3.20 Replacement HM-4G6-Z-21	HM-4#6-Z-19 (HM-4G6-Z-22): Rudder Servo Rod for Walkera 4G6/S, 4#6/S/BELL, M120D01, V120D01/2 & Heli-Max Novus 125 CP/FP Price: $2.50 Replacement HM-4G6-Z-22
HM-4#6-Z-20 (HM-4G6-Z-23): Tail Strut Set for Walkera 4G6S, 4G6, 4#6S, 4#6/BELL, V120D01, V120D02 & Heli-Max Novus 125 CP/FP Price: $2.50 Replacement HM-4G6-Z-23	HM-4#6-Z-21 (HM-4G6-Z-24): Tail Stand/Stabilizer, New Version, for Walkera 4G6S, 4G6, 4#6S, 4#6/BELL & Heli-Max Novus 125 CP, 125 FP Price: $2.95 Quantity:	HM-4#6-Z-22 (HM-4G6-Z-25): Tail Gear Holder for Walkera 4G6S, 4G6, 4#6S, 4#6/BELL, V120D01, V120D02 & Heli-Max Novus 125 CP/FP Price: $2.50 Quantity:	HM-4#6-Z-23 (HM-4G6-Z-26): Tail Blades Rocker for Walkera 4G6/S, 4#6/S/BELL, M120D01, V120D01/2 & Heli-Max Novus 125 CP/FP Price: $1.75 Replacement HM-4G6-Z-26 Quantity:
HM-4#6-Z-24 (HM-4G6-Z-27): Tail Steering Set for Walkera 4G6/S, 4#6/S/BELL, M120D01, V120D01/2 & Helimax Novus 125 CP/FP Price: $3.50 Replacement HM-4G6-Z-27 (SOME ASSEMBLY REQUIRED)	HM-4#6-Z-25 (HM-4G6-Z-28): Tail Bladeholder for Walkera 4G6S, 4G6, 4#6S, 4#6/BELL, V120D01, V120D02 & Helimax Novus 125 CP/FP Price: $4.00 Replacement HM-4G6-Z-28 Includes 2 bearings already installed inside these tail blades holders.	HM-4#6-Z-26: Tail Rotor Blades for Walkera 4#6/S, 4#6 BELL & Novus 125 FP Price: $1.95 Quantity:	HM-4#6-Z-27: Canopy for Walkera 4#6/S & 4#6 BELL Price: $6.60 Quantity:
HM-4#6-Z-28 (HM-4G6-Z-31): Complete Ball Bearing Set for Walkera 4G6S, 4G6, 4#6S, 4#6, 4#6 BELL, V120D01 and Novus 125 CP/FP Price: $8.00	HM-4#6-Z-30: Set of 2 Servos (WK-02-1) for Walkera 4#6, 4#6-Bell, V120D01 Price: $29.75	HM-4#6-Z-31 (HM-4G6-Z-34, HM-M120D01-Z-28): Tail Servo for Walkera 4G6S, 4G6, 4#6S, 4#6, 4#6 BELL, V120D01, V120D02 & Novus 125 FP/CP Price: $18.25	HM-4#6-Z-32 Walkera Brushless Main Motor for 4#6, 4#6S, 4#6Bell Price: $16.50 Quantity: This is a 003 motor with the correct pinion depth for the 4#6, 4#6S and 4#6 Bell
HM-4#6-Z-33-3PLUGS: Brushless Main Electronic Speed Controller, 3 Plugs for 4#6/S, 4G3, 4#3/B, CB100, V100D01, V120D01 & Novus FP/125FP/CP Price: $19.95 Quantity: HM-4G6-Z-36 (HMXM3005)* Main Brushless Electronic Speed Controller for 4G6, 4G3 & Novus CP same as HM-4G3-Z-40, HM-4#3B-Z-34. This ESC is used only with a brushless main motor. For brushless tail motor please use a tail ESC (HM-4G3-Z-43).	HM-4#6-Z-34 (HM-4G6-Z-37): Battery, 3.7V, 600mAh, 15C, for Lama2-1, 4#3/A/B/Q, 4G3, 4G6/S, 4#6/S/BELL, CB100, V120D01/2, Novus CX/FP/CP/125 Price: $8.15 HM-4G6-Z-37600 Battery: (3.7v, 600mAh, 15C) fits perfectly in Walkera & Novus 1- cell helis & offers longer flight time than the stock 400-500mAh batteries. Please click on "More Info" to see the link for the ultimate "650mAh" high capacity battery.	HM-4#6-Z-40: Bell Metal Head Set to Upgrade or Convert Walkera 4#6, 4#6S & HeliMax Novus 125 FP to 4#6 Bell Structure or used as 4#6 Bell Parts Retail: $34.95 Price: $25.95 You Save: $9.00 (26 %) Quantity: If you are having a rough time hovering your 4#6/S or Novus 125 FP, this easy upgrade will make a huge difference in stability for beginner pilots. The 45 degree bell structure acts as a gryoscope that resist any sudden shift in the main rotating axis.	HM-4#6-Z-41 + Manual: Walkera RX2433 Receiver With 3-Axis Gyro, For 4#6S, Novus 125 PF & Upgrading Walkera 4#6/BELL & Airplanes Price: Sale $44.95 (Reg. $59.95) Quantity: Upgrade your 4#6 BELL to 3-Axis Gyro with the RX2433. Wow Hobbies is the only vendor to supply custom instruction manual for RX2433 upgrade and we have tested the RX2433 upgrades on several models so that you won't feel like you are working in the blind.
HM-4G3-Z-39 (HM-4#3B-Z-33, HM-CB100) Brushless Main Motor: WK-WS-12-003, 12T For 4G3, 4#6/S/BELL, CB100, V100D01, V120D01/03 4#3/B, Novus CP/FP/125 FP Retail: $19.99 Price: $12.95 You Save: $7.04 (35 %) Quantity: HM-4G3-Z-39 (HM-4#3B-Z-33) Walkera BL Main Motor, WK-WS-12-003, 12T. If you are upgrading the 4G3, 4#6/S/BELL, V120D01/03, Novus CP/FP/125 FP please also consider the far superior & lighter Turbo Ace 71316 with rave reviews on its extraordinary power.	HM-4G3-Z-40 (WK-WST-10A-L) (HMXM3005): Main BL Electronic Speed Controller, 3 Plugs for 4G3, 4G6/S, 4#6/S, 4#3B, CB100, V100D01, V120D01/2/3 & Novus Price: $19.95 HM-4G3-Z-40 (HM-4#6-Z-33) (HMXM3005) Main Brushless Electronic Speed Controller for 4G3 & Novus CP is the same as HM-4#3B-Z-34 for 4#3B/A. This ESC is used only with a brushless main motor. For brushless tail motor please use a tail ESC (HM-4G3-Z-43).	HM-4G6-Z-12 (HM-4#6-Z-09): Tail Shaft for Walkera 4G6S, 4G6, 4#6S, 4#6, 4#6 BELL, V120D01, V120D02, V120DQ02 & Novus 125 CP/FP Price: $3.50 Quantity:	HM-4G6-Z-13 (HM-4#6-Z-10): Fixed Sleeve Set for Walkera 4G6S, 4G6, 4#6S, 4#6, 4#6 BELL, V120D01, V120D02, V120DQ02, & Novus 125 CP/FP Price: $2.50 Quantity:
HM-4G6-Z-14 (HM-4#6-Z-11): Holder Frame for Walkera 4G6S, 4G6, 4#6S, 4#6, 4#6 BELL, V120D01, V120D02, V120D02S, NewV120D02S, V120DQ02 & Novus CP/FP Price: $2.50 Quantity:	HM-4G6-Z-15 (HM-4#6-Z-12): Main Frame for Walkera 4G6/S, 4#6/S/BELL, V120D02/01, V120DQ02 & Novus CP/FP Price: $5.95 Quantity:	HM-4G6-Z-16 (HM-4#6-Z-13): Skid Landing (Newest Version 3) for Walkera 4G6S, 4G6, 4#6S, 4#6/BELL, V120D01 & Novus 125 CP/FP Price: $2.95 Quantity: Now shipping newest version as shown on photo. This version of the skid has been upgraded to stronger plastic material that resists crashes.	HM-4G6-Z-18 (HM-4#6-Z-15): Main Gear Set for Walkera 4G6S, 4G6, 4#6S, 4#6, 4#6 BELL, V120D01, V120D02, V120DQ02 & Novus 125 CP/FP Price: $5.00 Replacement HM-4#6-Z-15 Quantity:
HM-4G6-Z-19 (HM-4#6-Z-16): Transmission Gear Set for 4G6/S, 4#6/S/BELL, M120D01, V120D01/2, V120DQ02 & Novus 125 CP/FP Price: $3.95 Equivalent part is HM-4#6-Z-16 Quantity: HM-4G6-Z-19: Set of 3 Tail Transmission Gears is made of high impact plastic. Because these parts operate at high speeds with intense stress it will be a good idea to stock extras on your shelf.	HM-4G6-Z-20 (HM-4#6-Z-17): Tail Driven Shaft for 4G6S, 4G6, 4#6S, 4#6, 4#6 BELL, V120D01, V120D02 & Novus 125 CP/FP Price: $2.35 Quantity: Keyed Carbon Tail Drive Shaft	HM-4G6-Z-21 (HM-4#6-Z-18): Tail Boom for Walkera 4G6S, 4G6, 4#6S, 4#6, 4#6 BELL, V120D01, V120D02, V120D02S, NewV120D02S & Novus 125 CP/FP Price: $3.20 Quantity:	HM-4G6-Z-22 (HM-4#6-Z-19): Rudder Servo Rod for Walkera 4G6/S, 4#6/S/BELL, M120D01, V120D01/2 & Novus 125 CP/FP Price: $2.50 Quantity:
HM-4G6-Z-23 (HM-4#6-Z-20): Tail Strut Set for Walkera 4G6S, 4G6, 4#6S, 4#6, 4#6 BELL, V120D01, V120D02 & Novus 125 CP/FP Price: $2.50 Quantity:	HM-4G6-Z-24 (HM-4#6-Z-21): Tail Stand/Stabilizer for Walkera 4G6, 4G6, 4#6, 4#6S, 4#6 BELL & Novus CP/FP Price: $2.95 Quantity:	HM-4G6-Z-25 (HM-4#6-Z-22): Tail Gear Holder for Walkera 4G6S, 4G6, 4#6S, 4#6, 4#6 BELL, V120D01, V120D02 & Novus CP/FP Price: $2.50 Quantity:	HM-4G6-Z-26 (HM-4#6-Z-23): Tail Rocker for Walkera 4G6/S, 4#6/S/BELL, M120D01, V120D01/2, V120DQ02 & Novus CP/FP Retail: $1.75 Price: $1.49 You Save: $0.26 (15 %) Quantity:
HM-4G6-Z-27 (HM-4#6-Z-24) : Tail Steering Set for Walkera 4G6/S, 4#6/S/BELL, M120D01, V120D01/2, V120DQ02 & Novus 125 CP/FP Price: $3.50	HM-4G6-Z-28 (HM-4#6-Z-25): Tail Bladeholder for Walkera 4G6S, 4G6, 4#6S, 4#6, 4#6 BELL, V120D01, V120D02, V120DQ02 & Novus 125 CP/FP Price: $4.00 Quantity: Includes 2 bearings already installed inside these tail blades holders.	HM-4G6-Z-31 (HM-4#6-Z-28): Complete Ball Bearing Set for Walkera 4G6S, 4G6, 4#6S, 4#6, 4#6 BELL, V120D01, V120D02, V120DQ02 and Novus 125 CP/FP Price: $8.00 Quantity:	HM-4G6-Z-33 (HM-M120D01-Z-27, HM-4G3-Z-32) (HMXE2024)Set of 3 Cyclic Servos(WK-02-1):for 4G6/S/4G3,4#6/S/BELL,M120D01,V120D01/2/3/DQ02 & NovusCP/125 Price: $37.95 HM-4G6-Z-33 (HMXE2024) Set of 3 Cyclic 3G Servos: Please make sure model# located outside the servo casing near the servo arm says WK-02-1 (newer servos).
HM-4G6-Z-34 (HM-M120D01-Z-28, HM-4#6-Z-31): Tail Servo (WK-03-4) for Walkera 4G6/S, 4#6/S/BELL, M120D01, V120D01/2, V120DQ02 & Novus 125 CP/FP Price: $18.25	HM-4G6-Z-36: Main BL Electronic Speed Controller, 3 Plugs for 4G6/S, 4#6/S, 4G3, V120D01/02/03, 4#3B, CB100, V100D01 & Novus 125/FP/CP Price: $19.95 Quantity: HM-4G6-Z-36 is the Main ESC that controls the main motor which is different than the Tail ESC.	HM-4G6-Z-37 (HM-4#6-Z-34): Battery, 3.7V, 600mAh, 15C, for Lama2-1, 4#3/A/B/Q, 4G3, 4G6, CB100, 4G6/S, 4#6/S/BELL, V120D01/2 & Novus CX/FP/CP/125 Price: $8.15 Quantity: Just a bit longer than the older 450mAh & 500mAh batteries, this original Walkera 600mAh 1-Cell battery still retains the same thickness and width so it will fit perfectly into the same battery cages as before. Dim: 40mm x 24.5mm x 8mm, Wt: 15.3g	HM-4G6-Z-43-B: Black Canopy for Walkera 4G6S, 4G6, 4#6, V120D01, V120D02 & Novus 125 CP Price: $5.95 Quantity: Canopy for 4G6S, 4G6 & Novus 125 CP: Same as HM-4G6-Z-30 but with 4G6S lettering instead of 4G6.
HM-4G6-Z-43-R: Red Canopy for Walkera 4G6S, 4G6, 4#6, V120D01, V120D02 & Novus 125 CP Price: $5.95 Quantity: Canopy for 4G6S, 4G6 & Novus 125 CP: Same as HM-4G6-Z-30 but with 4G6S lettering instead of 4G6.	HM-CB100-Z-21 (HM-4G3-Z-31, HM-4#3B-Z-29):Charger for Lama2-1, 4#3/A/B/Q, 4G3/6, 4#6, CB100,V100D01/03BL/08, V120D02S, V120DQ02, & Novus125/CP/FP/CX Price: $6.95 (Same as HM-4G3-Z-31) Quantity: HM-4#3B-Z-29: Charger for all Walkera & Novus 1-cell helicopters. Chargers features convenient "plug in the wall outlet" with operation that will automatically shut-off when the battery is fully charged and the LED indicator turns from red to green.	HM-CB100-Z-26-3PLUGS (WK-WST-10A-L): Brushless Main ESC with 3 Plugs for CB100, V100D01, V120D01, 4#6/S/BELL, 4#3/B, 4G3, & Novus FP/125FP/CP Price: $19.95 Quantity: HM-CB100-Z-26-3PLUGS Brushless Main Electronic Speed Controller (ESC) is used only with a brushless main motor. For brushless tail motor please use a Brushless Tail ESC (HM-CB100-Z-27).	HM-M120D01-Z-27 (HM-4G6-Z-33, HM-4G3-Z-32) (HMXE2024)* Set of 3 Cyclic Servos (WK-02-1): for M120D01,V120D01/2/3, 4G6/S/4G3, 4#6/S/BELL & Novus CP/125 Price: $37.95 HM-M120D01-Z-27 Set of 3 Cyclic 3G Servos: Please make sure model# located outside the servo casing near the servo arm says WK-02-1 (newer servos).
HM-M120D01-Z-28 (HM-4G6-Z-34, HM-4#6-Z-31): Tail Servo (WK-03-4) for Walkera M120D01, V120D01/2/2S, 4G6/S, 4#6/S/BELL & Novus 125 CP/FP Price: $18.25 Quantity:	HM-Mini CP-Z-18: Charger (Ga-006) for Walkera Mini CP, Super CP/ FP, Genius CP / FP, Ladybird and New V120D02S Price: $7.50 Quantity:	HM-V120D02S-Z-31: Tail Servo (3g-4) for Walkera V120D02S and New V120D02S Helicopter Price: $15.95 Quantity:	HM-V120D02-Z-10-METALIC-RED: Canopy for Walkera V120D02, V120D01, 4G6S, 4G6, 4#6S, 4#6, 4#6 BELL, Novus 125 CP & 125 FP Price: $4.95 Quantity: This Metalic Red V120D02 canopy can also be used on V120D01, 4G6S, 4G6, 4#6S, 4#6, 4#6 BELL, Novus 125 CP & Novus 125 FP. Metalic Red is a darker glossier red that is prefectly matched with the red metal hardware on you helicopter.
HM-V120D02-Z-10-RED: Red Canopy for Walkera V120D02, V120D01, 4G6S, 4G6, 4#6S, 4#6, 4#6 BELL, Novus 125 CP & 125 FP Price: $4.95 This Metalic Red V120D02 canopy can also be used on V120D01, 4G6S, 4G6, 4#6S, 4#6, 4#6 BELL, Novus 125 CP & Novus 125 FP. Metalic Red is a darker glossier red that is prefectly matched with the red metal hardware on you helicopter.	HM-V120D02-Z-10-YELLOW: Canopy for Walkera V120D02, V120D01, 4G6S, 4G6, 4#6S, 4#6, 4#6 BELL, Novus 125 CP & 125 FP Price: $4.95 This V120D02 canopy share the same specifications and dimensions as V120D01, 4G6S, 4G6, 4#6S, 4#6, 4#6 BELL, Novus 125 CP & Novus 125 FP canopies with cosmetic difference.	HM-V120D03-Z-09 (HM-4G3-Z-39) Brushless Main Motor: WK-WS-12-003, 12T For V120D03/01, 4G3, 4#6/S/BELL, CB100, V100D01, 4#3/B, Novus CP/FP/125 FP Price: $16.95 Quantity: HM-V120D03-Z-09 Walkera BL Main Motor, WK-WS-12-003, 12T. If you are upgrading the 4G3, 4#6/S/BELL, V120D01/03, Novus CP/FP/125 FP please also consider the far superior & lighter Turbo Ace 71316 with rave reviews on its extraordinary power.	XTM-LP1S500: Battery, 3.7V, 500mAh, 15C, for Lama2-1, 4#3/A/B/Q, 4G3, 4G6, CB100, 4G6/S, 4#6/S/BELL, V120D01/2/3 & Novus CX/FP/CP/125 (Discontinued) Price: $6.25
MIA-4G6-EDGE-BLACK for Walkera 4G6/S, 4#6/S/BELL, V120D01/02 Price: $12.99 Cool Blue reflections on contrasting Galaxy Black enhances the high tech image of the Walkera 4G6S & 4#6S. This space odyssey inspiration marks the start of a new and exciting adventure. Decals & rubber grommets are included with a total weight of 4.1g.	MIA-4G6-EDGE-CARBON-LOOK (Phantom-Carbon) for Walkera 4G6/S, 4#6/S/BELL, V120D01/02 Price: $18.99 Quantity: Molded from carbon-like pattern material, this kit includes the Phantom Carbon Style Canopy, Mounting Rubber Supports, Decal Sheet. This is a heavy duty and crash resistence upgrade weighing 5.8g and customed to the Walkera 4G6S & 4#6S specification.	MIA-4G6-EDGE-ORANGE for Walkera 4G6/S, 4#6/S/BELL, V120D01/02 Price: $12.99 Update your 4G6S & 4#6S with this firefox orange canopy & yellow lighting decals. The kit includes mounting rubber gromets and easy to apply decal sheet. This highly resilient canopy is only 4.1g and fits perfectly on your stock Walkera 4G6S & 4#6S frame.	MIA-4G6-EDGE-RED for Walkera 4G6/S, 4#6/S/BELL, V120D01/02 Price: $12.99 Let's bring that quintessential "little sports car" out of your Walkera 4G6S. Red & grey racing stripes offset by black borders bring out the "sexy" on this glossy red canopy. Also, don't forget to get some HM-4G3-Z-01 red blades to bring it all together.
MIA-4G6-EDGE-SILVER for Walkera 4G6/S, 4#6/S/BELL, V120D01/02 Price: $12.99 Quantity: A sliver background compliments perfectly with chrome fixtures of the Walkera 4G6S. Then to maximized contrast, classic bold red stripes are accentuated by black borders for that slick luxurious finish on an angular design filled with sculpted details.	MIA-4G6-EDGE-YELLOW for Walkera 4G6/S, 4#6/S/BELL, V120D01/02 Price: $12.99 Quantity: Looking for a highly visible and a stream line 4G6 canopy? This heavy duty crash resistant mustard yellow canopy includes rubber grommets and black & white decals. This canopy is customed to the Walkera 4G6 specifications with a weight for 4.1g.	TTL-MP-16T-W: 16T Brass Pinion: Fits Feigao, Walkera & Heli-Max BL, 4.5g & 6g Outrunner Motor Shafts for 4#3/B/Q/4G3/4G6/CB100 & Novus 125 CP/FP Price: $3.95 Quantity: Center hole of this 16T pinion fits the 1.5mm shaft of the Walkera BL main motor, Feigao 12mmx20mm main motor, Losi 10,250kv or any motor with 1.5mm shaft. The pitch of this pinion matches the Walkera 4#3A, 4#3B, 4#3Q, 4G3, Novus FP & CP Main Gear.	HPET011: Neck Strap with Comfort Cushion Pad for Transmitter Price: $13.95
RCT-DS040 Large Socket Driver 4.0mm Price: $5.95 Quantity: Fits all 4mm applications and the Walkera 4G3, 4G6, 4G6S, 4#6, 4#6Bell, 4F200, 4F180, V120D01, V120D02, CB180, CB180Z, UFLYS, V200D01, V200D02, Novus 125 CP, Novus 125 FP and Novus CP main blade holding nut.	Walkera WK-2402 Transmitter: 2.4GHz, 4-Channels, LCD Screen, For All Walkera & Novus Fix-Pitch & Co-Axial, SALE !!! SALE !!! Price: $49.95 The Walkera WK-2402 Transmitter is compatible with all Walkera and Novus 4-Channel 2.4gHz helicopters.	Walkera WK-2801-PRO (Version 2.3) Transmitter: Programmable, 2.4GHz, 8-Channels, For Walkera & Novus Helicopters !!! Price: $159.95 Quantity: Compatible to all the latest 3 axis Walkera & Heli-Max Novus receivers such as RX2433, RX2435, RX2437S, RX2610S & Heli-Max Novus equivalents.	XTM-EAS004: Transmitter Neck Strap with Comfort Cushion Pad Retail: $13.50 Price: $11.95 You Save: $1.55 (11 %) Quantity: