This unit charges 2-cell & 3-cell batteries and includes a charging cable adapter to balance charge three 1-cell Walkera batteries simultaneously. Other adapters will not provide a balanced charge on multiple 1-cell batteries. Batteries are not included.

This balance charging cable adapter is used on a 3-cell charger (HM-CB180-Z-32 or B6 Charger - not included) to balance & charge 3 separate 1-cell batteries simultaneously. Other adapters will not provide a balanced charge on multiple 1-cell batteries.

This rugged Dual Turbo Ace Carrying Case provides ultimate protection for one V120D03/4G3 heli + one CB100/4#3B heli + Tx. Unlike typical aluminum cases, the Turbo Ace case is merticulously crafted from high gauge aluminum w/ a heavy duty handle.

One Phillips screwdriver for the micro Walkera helicopters size 000- Spindle handle, magnetic and hardened tip. Improved optimum tip angel for a better fit on micro screws. The choice Phillips #000 screwdriver for Wow Hobbies technicians.

These high performance rechargeable batteries are especially suited for optimizing performance on Walkera micro helicopters. Other higher capacity (600mAh-900mAh) batteries are too long & heavy causing slugish responses & a slow drift towards the back.

You can effortlessly prolong battery life by frequently checking its voltage. Measuring 1-cell for Walkera/Novus and 3-6 cell for Trex450/600 helis, this one step plug & test meter is accurate and much easier to use than most cumbersome voltage meters.

Turbo Ace 81016 Brushless Motor has been discontinued and it has been replaced by the more powerful 91416.

500mAh battery & high discharge rate of 20C (Walkera battery is 400mAh & 12C) offers extended flight & excellent performance. Avoid using longer 600-900mAh batteries on micros because they are too heavy & the center of gravity is too far towards the tail.

Turbo Ace Super Capacity 650-700mAh Battery, designed to fit the Walkera 4G3/6/S, 4#6/S/BELL, CB100 & the V120 Series, will extend your flight time. Higher 20C high output increases power for more extreme maneuvers in both sport flying and 3D flight.

This balance charging cable adapter is used on a 3-cell charger (HM-CB180-Z-32 or B6 Charger - not included) to balance & charge 3 separate 1-cell batteries simultaneously. Other adapters will not provide a balanced charge on multiple 1-cell batteries.

Due to air shipping specs, all 4 bottles are 20% - 25% filled (about a quarter of a bottle) to prevent messy air shipping spills. We have adjusted the price accordingly so you will have a little bit of glue, lock, grease & adhesive for a few bucks.

Two of the same phillips screwdrivers for the micro Walkera helicopters size 000- Spindle handle, magnetic and hardened tip. Improved optimum tip angel for a better fit on micro screws. The choice Phillips #000 screwdriver for Wow Hobbies technicians.

HM-4#3B-Z-(34&39) Combo wires set & Main ESC or Electronic Speed Controller (= HM-4G3-Z-40) for 4#3A, 4#3B, V100D01 & Novus FP is used in conjunction with a brushless main motor. For brushless tail motor please use the Tail ESC (HM-4#3B-Z-38).

HM-4#3B-Z-29: Charger for all Walkera & Novus 1-cell helicopters. Chargers features convenient "plug in the wall outlet" with operation that will automatically shut-off when the battery is fully charged and the LED indicator turns from red to green.

HM-4#3B-Z-35: This is the newest version of a brush tail motor with higher performance to match with an upgraded brushless main motor. If you want a brushless tail motor you will need to look for a Brushless Tail Kit instead.

500mAh batteries weight little less than 600mAh batteries giving you a slighter lighter feel.

Center hole of this 14T pinion fits the 1.5mm shaft of the Walkera BL main motor, Feigao 12mmx20mm main motor, Losi 10,250kv or any motor with 1.5mm shaft. The pitch of this pinion matches the 4#3A, 4#3B, 4#3Q , 4G3, Novus FP & CP Main Gears.

Steel Flybar

HM-4G3-Z-31: Charger is shared between all micro 1s Walkera and Heli-Max Helicopter Models. The charger will automatically shut off upon charge completion and the LED indicator will turn from red to green. Charges any 1 cell Lipo 50 mAh to 1000 mAh.

Just a bit longer than the older 450mAh & 500mAh batteries, this original Walkera 600mAh 1-Cell battery still retains the same thickness and width so it will fit perfectly into the same battery cages as before. Dim: 40mm x 24.5mm x 8mm, Wt: 15.3g

HM-4#3B-Z-29: Charger for all Walkera & Novus 1-cell helicopters. Chargers features convenient "plug in the wall outlet" with operation that will automatically shut-off when the battery is fully charged and the LED indicator turns from red to green.

400mAh batteries weight less than 500mAh or 600mAh batteries giving you a slighter lighter feel. The battery is more square and flat which is more suited for proper CG (Center of Gravity) on Lama2, Lama2-1 & Novus CX.

These high performance rechargeable batteries are especially suited for 3D & outdoor endeavors. 600mAh & a high discharge rate of 20C (vs standard 12C) offer excellent peak performance & longer flight time than Walkera or Heli-Max Novus batteries.

4#3B-Z-42600 Battery (600mAh 20C 3.7V) for 4#3B,4G3, 4G6 & all Walkera 1-cell helicopters. It offers longer flight time than the stock Walkera and Heli-Max Novus 400mAh batteries for the Novus FP & CP (GPMP0408)* and fits into all 1cell battery cages.

Radio transmitter hands free neck strap. Total length 45 inches.

The Walkera WK-2402 Transmitter is compatible with all Walkera and Novus 4-Channel 2.4gHz helicopters.

A shorter and thicker high Capacity 600mAh COMPACT Battery is designed for the Lama2-1, Novus CX and smaller micros. It offers longer flight time than the stock Walkera 400mAh and does not throw off the CG (Center of Gravity) like other 600mAh batteries

This 600mAh gives you more flight time than the stock Lama2-1 battery and it provides better CG for micro helicopters such as the Lama2-1, Novus CX, 4#3B, CB100 & V100D01 because it fit further inside the battery tray than longer "Standard Size" LiPo.