One Phillips screwdriver for the micro Walkera helicopters size 000- Spindle handle, magnetic and hardened tip. Improved optimum tip angel for a better fit on micro screws. The choice Phillips #000 screwdriver for Wow Hobbies technicians.

Set of 3 metal shims (super thin paper-weight washers)- Includes one 0.1mm , one 0.2mm and one 0.3mm thick shim with 6mm bore diameter. 2.9g motor and carbon stand/holder shown on photo are not included.

This is a brushless converter with no soldering required for easy Plug-N-Play. It is extremely easy to install and can convert most brush receiver signal to brushless and it will work and plug into most brushless ESC.

These high performance rechargeable batteries are especially suited for optimizing performance on Walkera micro helicopters. Other higher capacity (600mAh-900mAh) batteries are too long & heavy causing slugish responses & a slow drift towards the back.

You can effortlessly prolong battery life by frequently checking its voltage. Measuring 1-cell for Walkera/Novus and 3-6 cell for Trex450/600 helis, this one step plug & test meter is accurate and much easier to use than most cumbersome voltage meters.

500mAh battery & high discharge rate of 20C (Walkera battery is 400mAh & 12C) offers extended flight & excellent performance. Avoid using longer 600-900mAh batteries on micros because they are too heavy & the center of gravity is too far towards the tail.

This is a battery meter with built-in low voltage alarm can also be installed on board helicopters. At low voltages, a led will light up and the double buzzers will also sound a warning for pilots who are too far from the helicopter to prevent crashes.

Manufactured by the same Linear battery factory, the 650mAh is now available using the same process and technology as the 400mAh Linear battery. It provides the greatest CG adjustment (1.2 inch) ever possible for the 4G6/4#6/V120D02/ Novus 125.

This balance charging cable adapter is used on a 3-cell charger (HM-CB180-Z-32 or B6 Charger - not included) to balance & charge 3 separate 1-cell batteries simultaneously. Other adapters will not provide a balanced charge on multiple 1-cell batteries.

Package include 4 short steel legs and 4 long steel legs, extremely durable for training purpose. Total weight with 4 short legs: 4.2g Total weight with 4 long legs: 5.8g

This complete set includes magnetic base, protective metal case and micro blade balancer attachment to balance main blades for micro and super micro helicopoter. Compatible for models from Walkera, E-flite, Align T-Rex 100, Novus, Nine Eagle and etc.

The least expensive way to convert Novus FP, Walkera 4#3B & 4G3 to brushless. It uses your exiting RX2400/RX2406/RX2605 receiver to convert to brushless main. No soldering is required. CE701is a converter with a programmable Ebay ESC. Rx is not included.

This stock Walkera 2g brushless motor comes fully assembled and tested on the motor holder/stand (included). All you have to do is mount it on the tail boom and solder the wires back and you are done. Use the existing rubber grommet which is not included.

This stock Walkera 2g brushless motor comes fully assembled and tested on the motor holder/stand (included). All you have to do is mount it on the tail boom and solder the wires back and you are done. Use the existing rubber grommet which is not included.

Tail kit includes 2.9g Turbo Ace 29700 brushless tail motor, C-shape holder w/ carbon stand & RED CNC tail boom clamp- Only weights 0.5g , brushless wire set and exclusive motor-locking clamp. Holder fits 4#3B or Novus FP boom. Tail rotor not included.

The Turbo Ace 61316 (HP06) has been replaced by the 51416 BL Outrunner. The 51416's lighter design is more suited for micros and the updated speed eliminate the need to trim blades. So please look for listings that includes the 51416 instead of the 61316.

HM-4#3B-Z-(34&39) Combo wires set & Main ESC or Electronic Speed Controller (= HM-4G3-Z-40) for 4#3A, 4#3B, V100D01 & Novus FP is used in conjunction with a brushless main motor. For brushless tail motor please use the Tail ESC (HM-4#3B-Z-38).

HM-4#3B-Z-14: This is the standard Tail Knighthead/Skid for 4#3, 4#3A, 4#3B & Novus FP. As an alternative, you can make a couple of much stronger tail knight heads by ordering the following 2 parts listed under "More Info".

HM-4#3B-Z-16: Tail Holder Motor Mount for 4#3, 4#3A, 4#3B & Novus FP. This the holder for a standard brush tail motor. If you are upgrading to brushless tail motor you will need a different motor holder specifically for brushless motors.

HM-4#3B-Z-17: With minimal weight and maximum structual rigidity, this carbon Tail Boom for Walkera 4#3, 4#3A, 4#3B & Heli-Max Novus FP is 1/4inch longer which offers better tail authority than the old standard 4#3 boom.

Extended custom tail boom for the Walkera 4#3,4#3A,4#3B & Heli-Max Novus FP tail is 1/4 inch longer than 4#3B's HM-4#3B-Z-17 & Heli-Max's tail boom & 1/2 inch longer than the 4#3 stock boom and give the tail extra authority.

HM-4#3B-Z-34 (HMXM3005)* Main ESC or Electronic Speed Controller for the Main Motor which is different than the ESC for the Tail Motor. For brushless tail motor please use the Tail ESC (HM-4#3B-Z-38).

HM-4#3B-Z-35: This is the newest version of a brush tail motor with higher performance to match with an upgraded brushless main motor. If you want a brushless tail motor you will need to look for a Brushless Tail Kit instead.

This a new replacement 2g tail motor which will fit with your stock Walkera brushless tail holder/stand. Wow also have 2.5g and 2.9g brushless tail motor options with dual bearings and custom carbon fiber tail holder/stand for more power and durability.

HM-4#3B-Z-38 (HM-CB100-Z-27, HM-4G3-Z-43) Walkera Tail ESC/Converter: This Electronic Speed Controller also makes quick brushless tail signal conversions that is not provided by the brushless RX2406A/B or RX2400BL receivers with only BL main signals.

This Walkera brushless motor is custom fitted with a 16 teeth pinion for more powerful 3D on Walkera 4G6, 4G3 & Novus CP. You can also use this powerful option on a 4#3B, CB100, Novus FP in combination with a brushless tail motor.

HM-4G3-Z-40 (HM-4#6-Z-33) (HMXM3005)* Main Brushless Electronic Speed Controller for 4G3 & Novus CP is the same as HM-4#3B-Z-34 for 4#3B/A. This ESC is used only with a brushless main motor. For brushless tail motor please use a tail ESC (HM-4G3-Z-43).

Just a bit longer than the older 450mAh & 500mAh batteries, this original Walkera 600mAh 1-Cell battery still retains the same thickness and width so it will fit perfectly into the same battery cages as before. Dim: 40mm x 24.5mm x 8mm, Wt: 15.3g

HM-CB100-Z-26 Main ESC (Electroic Speed Controller) is used in conjunction with a brushless main motor. For brushless tail motor please use the Tail ESC (HM-CB100-Z-27).

HM-CB100-Z-27 (HM-4#3B-Z-38, HM-4G3-Z-43) Walkera Tail ESC/Converter: This Electronic Speed Controller also makes quick brushless tail signal conversions that is not provided by the brushless RX2406A/B or RX2400BL receivers with only BL main signals.

HM-V120D03-Z-09 Walkera BL Main Motor, WK-WS-12-003, 12T. If you are upgrading the 4G3, 4#6/S/BELL, V120D01/03, Novus CP/FP/125 FP please also consider the far superior & lighter Turbo Ace 71316 with rave reviews on its extraordinary power.

This Gear is a 64-pitch-teeth which matches with the 9T, 10T and 11T pinions that are also available in this store.

400 mAh 3.7v 1-cell

This is a brushless converter with no soldering required for easy Plug-N-Play. It is extremely easy to install and can convert most brush receiver signal to brushless and it will work and plug into most brushless ESC.

These high performance rechargeable batteries are especially suited for 3D & outdoor endeavors. 600mAh & a high discharge rate of 20C (vs standard 12C) offer excellent peak performance & longer flight time than Walkera or Heli-Max Novus batteries.

A shorter and thicker high Capacity 600mAh COMPACT Battery is designed for the Lama2-1, Novus CX and smaller micros. It offers longer flight time than the stock Walkera 400mAh and does not throw off the CG (Center of Gravity) like other 600mAh batteries

This 600mAh gives you more flight time than the stock Lama2-1 battery and it provides better CG for micro helicopters such as the Lama2-1, Novus CX, 4#3B, CB100 & V100D01 because it fit further inside the battery tray than longer "Standard Size" LiPo.