Matrix-G-FPV + Devo 10: NAZA-M V2, GPS, Gyrox-3, 8" Monitor, VTX/VRX, Vib Iso, RX, Telem, 8000mAh, B601
Part Number: Matrix-G+FPV+Devo10+NZV2+Gyrox3+Tel+8000+B601
Manufacturer: Turbo Ace
Manufacturer Part No: Matrix-G+FPV+Devo10+NZV2+Gyrox3+Tel+8000+B601
|THE NEW PARADIGM IN QUADCOPTER DESIGN
A game changer in aerial video and photography, Matrix is spawning a new era in super quadcopter designs. Sporting low profile architecture, its quadruple carbon fiber deck supports a generous 1000mm wingspan that's foldable down to fit inside an optional carry-on aluminum case for portability. No dismounting and remounting of propellers, landing skids or gimbal are required. Matrix's upgraded motors, advanced carbon ropellers and powerful 6-cell batteries offer up to 3 times the flight time and payload of traditional quadcopters. Ideally front mounted camera and brushless gimbal delivers wide-angle views unobstructed by propeller shadows, reflections and landing skids. Unprecedented vibration isolation on the upper decks provides optimal operating conditions for camera, gimbal and flight controller in up to 40mph wind gusts. Elimination of all structures associated with cumbersome undermounted gimbals lowers the center of gravity while greatly improving aerodynamics for top speeds that exceed 60mph.
MATRIX FEATURED VIDEO
MATRIX PACKAGE INCLUDES
- Turbo Ace Matrix-G Quadcopter System
- Walkera Devo 10 Transmitter + Telemetry
- Naza-M V2 Flight Controller + PMU (Power Management Unit) + GPS System (Functions listed on the next line.)
- GPS-Lock, Return-to-Home, Course-Lock, Home-Lock
- Gyrox3 Brushless Gimbal for GoPro Hero3/3+/4 Camera (Camera is not included.)
- 8 inches monitor w/ built in Receiver + Video Transmitter + GoPro cable ready
- 4x Decks including Vibration Isolation
- 4x Foldable Aerospace Aluminum Arms
- 4x Foladable Adjustable Landing Skids
- 2x Structural Carbon Fiber Beams
- Foldable GPS Compass with Anti-Slip Bracket
- 4x Dynamically Balanced Brushless Motors
- 4x 40A ESCs with Cooling Algorithm
- 4x 15" Ultra Stiff Carbon Fiber Propellers
- 8,000mAh 25C 6S (22.2V) LiPo Batteries for Trubo Ace Matrix
- B601 Professional Programmable Wall Charger
- User Instruction Manual in Flash Drive
MATRIX-G PACKAGE FEATURES & OPTIONS
- Quadruple Deck with G10 Architecture
- Vibration Isolation Deck to eliminate jello effect on videos
- Foldable Arms that locks into portable or operating positions
- Naza-M V2 Flight Controller Selection
- GPS & Compass Functions include GPS-Lock, Home-Lock, Course-Lock & Return-to-Home
- Brushless Gimbal for gyro based auto-stabilization or Hard Mount with Vibration Isolation Options
- Centrally Located Rotation for camera & gimbal auto-stabilization eliminates the pendulum effect
- 42mm Brushless Motors dynamically balanced to minimize vibrations
- 40amp ESCs with Cooling Algorithm overspecced to support extended high torque operations
- 15inch Extra Heavy Duty Carbon Fiber Propellers to resist flexing and warping under heavier payloads
- Structural Carbon Fiber Beams to provide extra rigidity
- 2.4GHz Standard & Long Range Walkera, Spektrum & Futaba Transmitters, Receivers & Telemetry
- Multiple Battery Mounting Positions on both top or bottom of main frame
- Single 8,000 or 10,000mah 6S (22.2V) LiPo Battery Options
- B601 or Quattro Professional Wall Charger Options
- Adjustable Landing Skid for a variety of surfaces
- Foldable GPS Compass with Locking Bracket for consistent alignment
- Adjustable Arms Mounting Position for aggressive forward sports flight
- FPV Live Feed Video available for a selection of cameras
- Flash Memory with detailed instructions
- Heavy Duty Aluminum Carrying Case option to fit Matrix, transmitter, gimbal & more.
- Training Package options including small crash resistant quadcopters & flight simulators
- Dimensions Wingspan (including propellers): Diagonal=1110mm, Front=1000mm, Back=935mm
- Dimensions Operating Position (including propellers): W=760mm, L=760mm, H=130mm
- Dimensions Folded Position (including propellers): W=295mm, L=780mm, H=110mm
- Dimensions Motor to Motor: Diagonal=725mm
- Maximum Payload Capacity: Gimbal+Camera+Accessories=3LB, Gimbal+Camera+Accessories+8000mah Battery=5.7LB
- Maximum Optimal Payload Capacity: Gimbal+Camera+Asscessories=2LB, Gimbal+Camera+Accessories+8000mah Battery=4.7LB
- Matrix Weight without Payload/Battery: 4.8LB
- Typical Take-Off Weight with Gimbal, Camera, FPV & Battery: Matrix+Gyrox-3+VTX& Power (6.15LB)+ Hero3 + FPV (.3LB) +VTX+8,000mah Battery (2.5LB) = 8.95LB
- Motors: Diameter=42mm, Height=35mm
- ESC: 40amp
- Propellers: 2xCW & 2xCCW, 15" Extra Robust Carbon Fiber Constructions, Dual Position Mount
- Battery Recommended: 8,000mah 6S (22.2V) 25C
- Flight Time: Matrix-G + 10,000mah Battery = 30min
- Flight Time: Matrix-G + 10,000mah Battery + Hard Mounted Hero 3/3+ = 25min
- Flight Time: Matrix-G + 8,000mah Battery + Brushless Gyrox-3 Gimbal + Hero 3/3+ = 17-20min
- Transmitter & Receiver Recommendation: 2.4GHz, Minimum 6-Channels, Optimal 7-Channels or more
- Operating Distance: Maximum 3,000 feet, Recommended 1,000 - 2,000 feet depending on local conditions
- FPV Recommendation: 5.8GHz Video Transmitter & Video Receiver + Monitor or Goggles
- Wind Tolerance: Class 4
- Aluminum Case Dimensions: L=935mm, W=410mm, H=145mm
CULMINATION OF INNOVATION, EXPERIENCE & EXECUTION
Leapfrogging quadcopter records with ease, the sporty new Matrix is crushing all competitions with its super sized wingspan. Yet, it folds down nicely to fit in a professional aluminum case along with the transmitter radio. Matrix's super efficient 6-cell system powers 4 muscular 42mm brushless motors driving 15" carbon fiber propellers for unparalleled lifting capacity and stability. Conceptualized by master FPV pilots, Matrix is a quadcopter designed for rather than adapted to carrying cameras. To satisfy an almost insurmountable list of high expectations, Turbo Ace engineers set out on a journey of innovation and discovery. Applying more than 85 years of combined helicopter and multi-rotor expertise between our master pilot group, engineers and designers, the Matrix represents an ultimate breakthrough in quadcopter engineering and optimization. To search for the ultimate mix of performance and durability, Turbo Ace developers matched up countless motors, ESCs and propellers combinations followed by series of unrelenting updates and test flights. From planning and implementing the best components on a foldable structure, setting and meeting new milestones in flight time and payload, to executing crucial requirements for flight and camera stabilization, the Turbo Ace Matrix is truly a quadcopter beyond its time.
UNPRECEDENTED PAYLOAD & FLIGHT TIME
Matrix's big breakthrough is a 20-minute flight time carrying the #1 selling GoPro Hero3 stabilized on the ultra fast 2-axis brushless Gyrox3 gimbal. Cutting out the gimbal but keeping the Hero3 on a vibration isolation plate will extend Matrix flight time beyond the amazing 25min threshold. Despite many unrealistic claims, the closest competition offers less than half the flight time. At about 3 times the size of a mid-sized quadcopter, heavier payloads exert disproportionatelly less impact on Matrix flight time than smaller quadcopter flight time. Without exception, even the top selling mid-sized quadcopters with 8" to 10" propellers will max out at 5-6 minutes with Hero3 and gimbal onboard. It's common for both vendors and end users to exaggerate or manipulate payload and flight time by gutting critical components inside quadcopters and cameras.
IDEAL UNOBSTRUCTED AUTO-STABILIZED CAMERA/GIMBAL LOCATION
Tired of propellers and landing skids framing your video? The Matrix's nose offers an ideal location with unobstructed view - no propellers even in wide angle videos, no skid landing when pointed down and no more annoying propellers shadows on the lenses. Although these are nagging issues, there are even more crucial factors in achieving stability. Because traditionally mounted cameras are about 8 inches below the main hub, a quadcopter's roll causes the camera to swing like a pendulum. Although a good gimbal is able to compensate for the roll axis movement, it's unable to address the horizontal movement that causes a video to shift from side to side as if a skater is holding the camera. By moving the gimbal and camera up to the level of the propellers, the Matrix design has basically eliminated the pendulum effect. Last but not least, gimbals are only as stable as the foundation they are mounted on. Bypassing the weight and slack of unstable undermounted gimbal platforms, Matrix's gimbal is mounted directly on the main frame to prevent oscillation from surfacing.
QUADRUPLE G-10 DECK FOR COMPREHENSIVE & VIBRATION FREE INTEGRATION
In housing and supporting an extensive list of stock and upgrade components on a super-scaled quadcopter, Matrix's quadruple decked G10 structure is extremely strong and versatile. Four foldable arms which double as supporting beams are securely sandwiched between the lower decks along with multiple ventilated ESC positions. Above the vibration isolation, the upper two decks house and protect all critical electronic components such as the flight controller, the sensors and most critically the gimbal to prevent jellow effects on videos. Versatile battery mounting positions allows the operator to shift CG (center of gravity) to accommodate a wide variety of payloads and flight characteristics. Mount the battery below the lower deck for more stable flights or move the battery to the upper deck to increase maneuverability. And to counter balance different camera payloads, you can shift the battery into optimal positions.
High frequency vibration on cameras is the principal cause of jello effects on videos. Implemented on a vast scale, Matrix's vibration isolation between upper and lower decks offers a comprehensive anti-vibration solution for gimbal, camera and flight controller. In contrast to skimpy isolation plates, rubber bands or balls, Matrix's C4 vibration roadblock encompasses the entire surface dimensions and mass of the upper decks to neutralize vibrations. By including an extra layer of vibration dampening for the flight controller, Matrix is also preserving a common practice amongst professional pilots. A flight controller's sensitive gyro system can often misinterpretate vibrations as part of an aircraft movement, leading to adjustments and counter adjustments that generates more vibrations. By addressing the cause and effect of vibrations, the Matrix platform offers the epitome of production quality videos without the side effects of post editing.
FOLDS AND FITS NEATLY INTO AN INDUSTRILA GRADE ALUMINUM CASE
No more awkward quadcopter with protruding arms and propellers to lug around. Unlike typical folding mechanisms, the Matrix's arms and landing skids are designed to lock into folded or operating positions so you don't have to sacrifice structural integrity for portability. Implementation of slotted tracks enables fast and secured transitions without the risk of losing any hardware. For a day out in the park or a hiking trip, you can retract the arms and skids to reduce the footprint. And for traveling, foldable antenna enable the Matrix and the transmitter to slip comfortably into a professional aluminum case without dismounting the propellers and gimbal. There are even cutouts for transmitter, batteries, spare parts & tools. Upon arrival at the flight location the operator can unfold the arms, the antenna and adjust the landing skid height to accommodate local terrain and launch the Matrix within a couple of minutes.
DYNAMICALLY BALANCED MOTORS & OVER-SPECCED ESCS
For exceptionally smooth flights, Matrix super muscular 42mm brushless motors are dynamical balanced. Since brushless motors are hand wound, the mass center is usually not in alignment with the mechanical center. Using advanced electronic balancing instruments, our factory spins up each motor then make proper adjustment to bring the mass center into alignment. Then to control and power the motors, Matrix 40A ESCs feature advanced multi-rotor algorithms which offers better performance and reliability than generic helicopter algorithms. Over-specced to sustain unrestrained amperage in higher torque for acceleration, extreme maneuvers and bigger payloads, Matrix is engineered to operating below capacity, so mechanical and electronic components stay relatively cooler even with consecutive flights.
STIFFER & THICKER DOUBLE-POINT MOUNTED 15" CARBON PROPELLERS
No propellers are created equal. 15" Matrix robust carbon fiber propellers are sculpted with extra thick mid-section to resists flex then tapers to efficient blades to cut through the air with minimal resistance. Traditional circular mounts are accidents waiting to happen because the force of rotating propellers will eventually unscrew the crown nuts during flight. Integrated double point mounts on Matrix motors and propellers eliminate this possibility and at the same time improve tracking precision because the propellers are forced to sit flat against the top of the motors. Another benefit of a flat mount is that there are no vulnerable protruding motor shafts. Slight deviations in traditional circular mounting holes or protruding motor shafts are extremely difficult to detect which magnify pitch and tracking variances, a major cause of vibrations and unstable flights. Since end-users are often required to purchase and mount propellers, Matrix's new hassle free mounting configuration is implemented to prevent vibration issues from surfacing.
SELECTABLE MANUAL, ATTITUDE & GPS FLIGHT MODES
A 3-positioned switch is setup on Matrix' transmitter for pilot to select between 3 different flight modes. (1) With Manual Flight Mode, the absence of Gyro assisted flight makes it very difficult for the Pilot to stabilize and maneuver the quadcopter. (2) For 3-axis gyro auto-stabilized flight, the Attitude Flight Mode will automatically keep the Matrix in a leveled and sustainable flight thus enabling the pilot to focus on maneuvering the quadcopter. (3) Finally, the GPS Flight Mode is the most often used mode because it combines the benefit of 3-axis gyro auto-stabilized flight with 4 advanced GPS based functions described below.
GPS-LOCK & RETURN-TO-HOME
Under GPS Flight Mode, (1) one of the most utilized GPS based functions is the GPS-Lock function. Simply release the cyclic stick and allow it to spring to the middle of the control and the Matrix will be locked into a fixed GPS location (longitude-lock and latitude-lock) with a tolerance of 3 to 5 feet radius. Another similar function from the Matrix flight controller, the Barometric-Lock can be activated by moving the throttle stick to the middle of the control and the Matrix will be locked into a fixed elevation (altitude-lock). A hands-free hover modes is established when the pilot activates both the GPS-Lock and the Barometric-Lock simultaneously and the flight controller takes over. Either lock may also be used independently to hover in a fixed GPS coordinate with pilot controlled elevation or the longitude/latitude. By relinquishing controls to these auto-hover modes, the pilot can better focus on monitoring the video and controlling the camera. (2) Another popular GPS function is the Return-to-Home feature, a preprogrammed failsafe function that's automatically triggered by lose of remote control signals. Upon activation, the quadcopter will hover in place for a couple of seconds before elevating to a preprogrammed height and return to the home position for an automated landing sequence.
GPS BASED COURSE-LOCK & HOME-LOCK
Under GPS Flight Mode, there is dedicated 3-positioned carefree mode switch set up to access (3) Course-Lock, a compass based carefree mode that remembers the initial take-off direction of the flight which is used to consistently orient the quadcopter. Under Course-Lock, the transmitter radio must remain in the initial take-off direction until it's reset or until the quadcopter lands. For example, with the transmitter pointed in the eastward direction, a quadcopter takes off in eastward heading orientation then turns towards a northward heading. Without Course-Lock, a transmitter cyclic (directional) stick moved up towards the east will cause the quadcopter to head northward. Under Course-Lock, a cyclic stick moved up towards the east will cause the quadcopter to head eastward which is consistent with the initial take-off direction. In fact, by keeping the transmitter pointed in the initial eastward take-off direction, the cyclic stick direction will always correspond to the direction of the quadcopter no matter how the heading has changed. At any time the pilot may reset the initial direction by flipping the Carefree Mode Switch in and out of Course-Lock. (4) Lastly, there is another similar carefree mode with a twist. Home-Lock, a home coordinate based carefree mode is very similar to Course-Lock. The difference is that Home-Lock uses the home location as the consistent tail-in orientation for the entire flight. While this allows the pilot to constantly turn and follow the quadcopter, the pilot should not move away from the home location. And because GPS has a tolerance of 3-5 feet, Home-Lock is less precise than Course-Lock. However, as the quadcopter gains more distance from the home position the precision improves dramatically. This is why Home-Lock will not and cannot be activated within a 30-feet circle from the home position. To use Home-Lock, the pilot usually maintains a tail-in orientation until the quadcopter is well beyond the 30-feet circle before assuming that Home-Lock has activated. At this point the pilot can constantly turn and point the transmitter at the quadcopter and the cyclic stick will always correspond directly to the quadcopter's direction. To bring the quadcopter back, the pilot simply pulls the cyclic towards himself - basically a manual controlled return-to-home function. Special caution is required when the quadcopter approaches the 30-feet circle because Home-Lock will automatically switch to Course-Lock. If the quadcopter enters the 30-feet circle from the initial take-off direction so that Home-Lock is equal to Course-Lock the pilot can assume that the quadcopter is under Course-Lock until the quadcopter lands. In summary, an experienced pilot uses the "Normal" flight mode because no help is required from GPS. Both Course-Lock & Home-Lock carefree flight modes enable the operator to pilot the quadcopter without keeping track of the quadcopter's tail position. This is especially useful if a less experienced pilot is rotating the quadcopter to pan the video. There is much less confusion for beginner pilots to stick with either "Normal" mode or use GPS assisted Course-Lock. Home-Lock is usually reserved for longer distance within-the-line-of-sight flight because it's a bit confusing to operate when it approaches the home position.
ULTRA DURABLE & MAINTENANCE FRIENDLY
All Matrix material and components are selected and built for reliability and durability. Premium carbon fiber is utilized in the main frame for its rigidity and light-weight properties. Wear resistant CNC aluminum is utilized in screw-mounted joints, brackets and posts. Tough Japanese bearings are implemented to guard against higher temperatures. Then for continued maintenance, Matrix is based on a modularized design with strategically placed high tensile strength connectors so it's extremely easy and cost effective to maintain and operate. With minimal disassembly, components can be independently removed and replaced to diagnose and repair problems. As with all Turbo Ace production models, well stocked Matrix parts and upgrades are manufactured in larger volumes and savings are passed on to end-users. Operators are encouraged to keep some backup parts such as spare propellers, screws and batteries for replacement. Complimentary Turbo Ace videos are available online to assist operators in maintaining and upgrading the Matrix.
EXPANDABILITY WITH OPEN ARCHITECTURE & UPDATABLE ONLINE FIRMWARE
Catering to research professionals and avid hobbyists, the Matrix welcomes a full spectrum of specialized modifications. An open architecture supports unparalleled flexibility for arm and frame extensions, variable motor mount options and ample space for peripheral integration. To get a head start on more advanced integrations, you can get an upgrade from the DJI Naza-M Lite to either the Naza-M V2 or WooKong flight controllers that are all supported with continued online updatable firmware. Multiple adjustable mounting positions are pre-drilled to accommodate third party gimbal integration.
DJI NAZA-M V2 FLIGHT CONTROLLER
- Support Multi-Rotor: Quad-Rotor I4, X4/ Hex-Rotor I6, X6, IY6, Y6/
- Supported ESC Output: 400Hz Refresh Frequency
- Recommended Transmitter: PCM or 2.4GHz with minimum 4 channels
- Working Voltage Range: MC: 4.8V~5.5V
- Working Voltage Range: PMU input: 7.4V to 26.0V (recommend 2S to 6S Lipo)
- Power Consumption: MAX 3.15W (0.25A@12.6V), Normal: 1.638W (0.13A@12.6V)
- Operating Temperature: -10 ~ 50 degree Celsius
- Assistant Software System Requirement: Windows XP sp3 / Windows 7 / Windows 8
- Maximum Yaw Angular Velocity: 200/s
- Maximum Tilt Angle: 45
- Ascent / Descent: +-6m/s
- MC: 27g
- GPS/Compass: 27g
- PMU: 28g
- LED: 13g
- Dimensions: MC: 45.5mm x 32.5mm x 18.5mm, GPS/Compass 46mm (diameter) x 10mm, PMU 39.5mm x 27.5mm x 10.0mm, LED 25mm x 25mm x 7.0mm
- Built-in Functions: Three Modes Auto-pilot, Enhanced Failsafe, Low Voltage Protection, S-Bus Receiver Support, PPM Receiver Support, 2-Axis Gimbal Support
Aerial camera mounted under quadcopter serves two main purposes. (1) First and foremost, cameras are used for the purpose of recording videos or taking still photographs. Preferably, a high definition camera is mounted on an auto-stabilized brushless gimbal (camera mount) to stabilize the camera's horizon. (2) For more experienced pilots, a camera can be used for the purpose of piloting the quadcopter from the point of view of the camera aka FPV (first-person-view) piloting. If a camera is mounted directly on the quadcopter without stabilization, the pilot can see the tilt (pitch) & roll of the Matrix. If the camera is mounted and auto-stabilized on a gimbal, OSD (on-screen-display) may be a desireable upgrade to overlay artificial horizon and flight status on the live feed video.
- Super Compact at 1"x1"x1" Approximate Dimension
- Extremely Light
- Hinge for Manually Adjustable Tilt Angle
GoPro Hero 3/3+
- Adjustable Ultra Wide Angle Lenses
- 2X Faster Image Processor
- 2X Low Light Performance
- 12MP Image Sensor for high definition photos
- HD Video from 1080p at 60 fps to 4K at 15 fps
- Wi-Fi enables all camera function to be remotely controlled at up to 500 feet.
AUTO-STABILIZED CAMERA MOUNTS ON MATRIX
For professional videography, an advanced auto-stabilized brushless gimbal is extremely effective in accommodating quadcopter's tilt & roll movements to maintain a leveled video horizon. To control the camera's aim, a dial switch on the transmitter radio enables the pilot to tilt the camera up or down. With freedom to maneuver and turn the quadcopter from different perspectives, heights and angles, the operator can achieve an endless variety of creative shots and videos.
Gyrox-3 Brushless 2-Axis Gimbal
- Super Fast Auto-Stabilized Roll-Axis
- Super Fast Pilot Controlled & Auto-Stabilized Tilt-Axis
- Expanded Tilt-Axis Angle Enables the Camera to Point Straight Down
- Optimized Stabilization & Mounting for GoPro Hero3 Camera Only
- Compatible with neutural density lens to accommodate intense daylight filming
FPV Live Video Feed & Optional iOSD
Live feed video enables the pilot or cameraman to see real time videos from the camera's point of view which is synonymous to FPV (first-person-view). In contrast to slower and shorter distanced WiFi video streaming on cameras, aerial FPV requires much longer distance transmission without visible delay. A video transmitter is usually attached to a camera's video-out port transmits the video signals. A matching video receiver located next to the pilot or cameraman receives the video signal that is then plugged into a monitor's video-in port for displaying the video. There are 2 main purposes for aerial FPV. (1) To enable pilot/cameraman to see and frame videos or still shots by adjusting the gimbal and/or the quadcopters location and orientation. (2) To enable pilot to see and fly from the point of view of the camera (view from the cockpit). If a camera is hard mounted without auto-stabilization, the video will reflect the tilt (pitch) and roll of the quadcopter. If a camera is auto-stabilized on a gimbal, an OSD (on-screen-display) may be implemented to overlay artificial horizon and flight data on the auto-stabilized video.
FPV From Hero3 or HD Camera
- You can see exactly what the Hero3 or HD camera is capturing for framing your video and stills.
- Special cable connector is provided for onboard video transmitter to plug into the Hero3 or HD camera's video out port
- A video receiver on the ground is mounted behind and plugged into a FPV monitor.
- A bracket is supplied to mount the FPV monitor on top of the transmitter radio so that the operator and pilot the Matrix and watch the live video feed at the same time.
STANDARD & LONG DISTANCE TRANSMITTERS FOR MATRIX
Due to safety and equipment concerns, transmitter reliability is crucial in professional quadcopter operations. Without an established standard of verification, it's common place for transmitter brands to overstate operating distance by discounting the importance of reliability. A typical transmitter spec for 3,000 feet range may only be reliable 80% of the time and you can easily lost your equipment in several flights at 500 feet. Only extensive field testing over several months - not biased reviews based on several test flights - are true indicators of consistently reliable operating range.
Walkera Devo 10 Transmitter
- 2.4GHz Transmitter with 10 Channels
- RX1002 Receiver with 10 Channels
- Telemetry Installed for Updated Flight Battery Status to Trigger Low Battery Alarm
- Operating Range: Maximum 3,000 Feet, Recommended 1,000 - 2,000 feet depending on location and operating parameters such as topography, operating height and local signal traffic.
TRANSMITTER & RECEIVER OPERATING REQUIREMENTS
Standard remote control transmitters and receivers utilized with the Matrix quadcopter operate under FCC Part 15 (S29DEVO-10, BRWDAMTX11, AZPT14SG-24G, S29TX5803) in either legal 2.4GHz and/or 5.8GHz frequencies. In general, advanced quadcopters require a minimum of 7 channels under the 2.4GHz frequency range: 4 channels for piloting controls, 2 channels for the GPS and 1 channel for controlling the tilt-axis of the gimbal. Extended distance receivers usually employ multiple antennas to promote signal strength and reliability. Products using permitted frequencies without certification will require an amateur radio (ham) license. It is the operator's responsibilities to ensure the use of such products meet their individual countries' federal and local government's rules or regulations for RF devices. If you are unsure of your government's requirement or unable to comply with them, please do not purchase this product. Please do not alter the purchased product in violation of said rules and regulations because Wow Hobbies cannot be held liable for operator's misuse or modification of a legal product.
INTEGRATION, SET UP, FLIGHT TEST & SHIPPING
There is a myriad of Matrix options to satisfying specific applications. After installation, setup and inspection, our technicians will complete final adjustments plus a series of test flights. If your orders is placed for pick-up, we will redo a live flight-test when you arrive at our showroom. If your order is to be shipped, a test flight video for your specific Matrix order will be recorded, saved and shipped with the instructions in a flash drive. Our Matrix packages are designed to retain all assembled components as a fully integrated system during shipping. To prevent damage, the Matrix quadcopter is suspended in the middle of a large corrugated shipping box.