| | |
|
| |
| | |
|
|
Turbo Ace 82900 Brushless 9.5g C10 Upgrade Motor: No Pinion Included, for Eflite CX2, CX3, Esky Lama 3, Lama 4 Brushless kit
|
|
Out of stock
Part Number: MT-82900-NP (No Pinion)
|
This replacement motor is for Eflite CX2, CX3, Esky Lama 3 or Lama 4 brushless upgrade system. It can not be used as a stock brush motor replacement.
Brushless outrunner custom for the E-flite CX2, CX3 and the Lama 3, 4 helicopters
Weight 8.5g including mount ( 9.5g including 2mm diameter gold connectors )
Max Current: 5 Amps
Size: 17.8 mm diameter x 20 mm long
2mm shaft
6 pole magnets
firewall mount
2900kv
Voltage: 2s-3s lipo
Airplane use
recommended prop for 2S or 3S GWS 4x2.5
Helicopter use
Eflite CX2, CX3, Esky Lama 3, Lama 4 brush or brushless motor with 2 mm shaft
Unlike a standard C10 motor, the mounting holes of this motor are custom to match exactly with the stock brush motor holes. This motor has both C10 mounting holes and CX2/CX3 mounting holes. Pinion can be removed from your old motor with a pinion puller. To re-install the pinion on this new motor, apply a tiny drop of Super glue on the motor shaft using a tooth pick. Insert pinion and allow glue to dry. Pinion can still be removed for service by applying heat to the main shaft with a soldering iron.
|
|
|