Turbo Ace 411500 Brushless CO5 Motor (No Pinion): 4.3g to 4.5g Motor, (3-Pin motor connector installed) for MCPX, CB100, Genius, Mini CP

Ideal for E-Flite MCPX, Walkera Genius and Mini CP brushless conversion with motor connector all completed which is not normally included in the factory CO5 motor.

Walkera ESC has a slightly different timing when used with this motor. As a result this motor is likely to cog during startup and may required hand cranking. If you purchase the kit, we have already tested and made sure of the start-up is smooth. If you use a Walkera ESC, there is about a 30% chance that it will have start-up issue.

To purchase kit goto
http://www.wowhobbies.com/turboace411500brushlessmotor-43g-3-1.aspx

For the MCPX kit
http://www.wowhobbies.com/thesteveblsinglechannelconverter-3-1-1-2.aspx
 

The motor has been tested on the 4#3b with the Turbo Ace CE700 ESC/conver with excellent result. Note that AEO, 3A and Walkera ESCs will not function properly with this motor due to different timing and current requirement. Our test has confirmed that reports from RC Group forum were correct that during high current load, AEO ESC and 3A ESC both cut off and stall motors and the Walkera ESC will often cause the outrunner motor to cog during startup.