HM-4G3-Z-42 (HM-V120D03-Z-10, HM-4#3B-Z-37 ) Brushless 2g Tail Motor: For Walkera 4G3, V120D03 & Novus CP

Equivalent Parts:

HM-V120D03-Z-10
http://www.wowhobbies.com/turboace212200brushlessmotor-2g-2-1.aspx


Shaft is keyed with flat area to lock 4G3/V120D03 tail rotor. Metal barrel casing for the coil: allows mounting without bracket.

Special tail holders and ESC is required to use this brushless motor on the Walkera 4G3, V120D03 & Novus CP.
Wires are securely fastened for durability and improved contact points.

 

Before you commit to the Walkera 2g Brushless Tail Motor & Fiber Glass Tail Stand/Holder for the 2g BL Tail Motor, you need to look at the much more powerful and durable 2.9g Turbo Ace 29700 Brushless Tail Motor (dual bearings) with the Cabon Tail/Holder for the 2.9g Motor.  Click here for details: http://wowhobbies.com/tailholdercustomedfor2gturboace27700brushlessmotorfor4g3or43b-1-1-1-2.aspx

 

With any brushless tail upgrade you need a poweful brushless main motor upgrade to match.  In this respect, the Turbo Ace 71316 brushless main motor will turn your V120D03, 4G3 or Novus CP into a real hot rod. The Turbo Ace 71316 is much lighter and it will give you 25% more lift than Walkera stock brushless main enabling pilots to fly outdoor against the wind or perform true true 3D! go to http://www.wowhobbies.com/turboace71618brushlessmotorhp07-2exceptionallyhighperformancethermo-coolbloutrunner18tpinioninstalle.aspx

 

Specifications:
Size: Diameter 10mm x Casing 6mm
Shaft diameter: 1mm
kv:7700rpm/v
Weight: 2g
voltage:3.7-7.4v
Idle Current:0.1A
LoadCurrent:1.5A
NoloadSpeed:12200rpm
Load Speed:9500rpm
Prop:GW/EP3020
Pull:25g
used in indoor small heli / plane(weight≤40g)