Turbo Ace 29701 (Clip-On-Version): 2.9g Groved HP03-2 Brushless Motor + Mounting Clip, For CB100, 4#3B, V100D01, V120D03, 4G3 & Novus FP/CP

Price: $29.95 Part Number: TTH-MT-29701+CLIP Manufacturer: Turbo Ace Manufacturer Part No: TTH-MT-29701+CLIP Quantity:

2.9g Turbo Ace 29701:HP03-2 Brushless Tail Motor w/ Mounting clip for the 2.9g V-shape carbon tail holder.   If you are just replacing your 2.9g motor you come to the right page. The mounting clip avoids the mess created using glue. This is an exclusive Wow Hobbies 2.9g mounting design not only does not require glue for mounting but also it is the lightest possible way to convert the tail to 2.9g brushless. We recommend that you cut the motor wires down to one inch and use the color coded rubber insulated wire set  http://www.wowhobbies.com/hm-43b-z-39tailmotorbrushlesswirefor4343a43b.aspx  for 4#3B and CB100 size heli because the rubber coating will prevent shorts in a crash. Tail rotor blade on photo is not included. As you may already know, the 4G3 has very limited ability for 3D flight. Mainly because the stock brush motor is unable to keep up with the 3D maneuver due to its low thrust and low KV. It is almost a necessity to convert the 4G3 tail to brushless for high speed KV tail manuever. Current the 2.9g brushless outrunner is the best brushless tail solution for the 4G3 and 4#3B which fit with 4G3 or 4#3B tail rotors.  Tail rotor on the photo is not included.     Optional shim set to make the 2.9g motor stay tightly on the carbon tail stand. Click on http://www.wowhobbies.com/brushlesstailkitshimfor29701hp0329gbltailmotortomountoncarbontailholder.aspx   If you are making a brush to brushless conversion on your 4G3 or 4#3B you need the whole 4G3 or 4#3B Brushless Tail Kit which includes the 2.9g Brushless Motor, the Walkera Tail ESC, the Cabon Tail Stand/Holder & Wires. You can virtually complete the BL tail mode in 5 minutes.  Click here to see this kit. http://wowhobbies.com/tailholdercustomedfor2gturboace27700brushlessmotorfor4g3or43b-1-1-1-2.aspx   Other additonal links regarding this subject: http://wowhobbies.com/flea-converterwithbuilt-inescforthetailandhighspeedapplications.aspx http://wowhobbies.com/tailholdercustomedfor2gturboace27700brushlessmotorfor4g3or43b-1.aspx   Specification: Weight: 2.9g Size:: 13mm and 5mm Shaft diameter: 1mm Shaft length: 5mm RPM: 8000KV Thrust: 20g Working current: 1.2A Idle current: 0.2A