| | |
|
| |
| | |
|
|
MCP X BRUSHLESS CONVERSION KIT-P with THESTEVE-PCB CO5 BL Motor for the MCPX/MCPX2
|
|
Retail: $127.99
Sale Price: $48.97
You Save: $79.02 (62 %)
Part Number: WWS-MCPX BL KIT STEVE-PCB-P+XP7A-5+CO5 *
Manufacturer: WOW
Manufacturer Part No: WWS-MCPX BL KIT STEVE-PCB-P+XP7A-5+CO5
|
New plug and play version. No Soldering is required for this entire kit and maintenance is super easy since it is very easy to remove. Now features detachable converter to allow ESC programming for soft start, motor starting power ... etc. Wow Hobbies has chosen a default setting for the ESC contained in this kit but if you wish to make changes to fit your personal need, the optional programmer can be purchased at
http://www.wowhobbies.com/xp-7aebayblescprogrammer.aspx
TheSteve converter in this kit is the original version in PCB form, there are no wires from the converter to the ESC. This creats a more reliable connection and greatly increases durability in a crash.
This 7A ESC combo with TheSteve converter has been tested to run a CO5 brushless motor at approximately 4950 RPM head speed. We will also be carrying a cheaper more affordable 6A ESC size 18.4 * 13.3 * 3.7mm with build in converter that runs a CO5 at approximately 4650 RPM head speed using a stock MCPX battery. The difference is that the 7A ESC in this kit is able to truly unleash the power of a brushless motor and give you better all out 3D performance whereas the less expensive 6A ESC will be a calm more affordable flyer.
The MCP X brushless main conversion kit. Includes everything you need to convert your MCP X to brushless main. Just plug in the connector to the motor plug and the power connector to your MCP X 3-in-1 receiver board, no soldering required. There is no longer any need to risk soldering any wires to your 3-in-1 main receiver board. Why does this kit cost more than buying the components separately? Because, Wow Hobbies has to integrate all the components and solder them to the XP-7A-5, install all the connectors, pinion, test them together and guarantee the kit to work by the time you receive it. This kit is custom made, integrated and tested in the USA. To fit the brushless motor in the MCPX frame, you will need a X-Acto knife or blade to cut off little plastic triangles around the stock motor. Please make sure the turning bell of the motor does not rub against the frame after you are done. If you do not wish to do any cutting and want this kit to be plug and play, we recommend the brushless ready carbon frame, goto
Watch this video below and you will know why this CO5 kit makes the best indoor MCPX brushless heli. The motor power mix is just right for indoor in comparison to the best outdoor performer using the HP05 kit which we also carry.
Recommended for a more superior tail hold and increased tail motor life, is the optional super tail assemble. In this tail assembly the tail motor is about 3 times the size of the stock tail motor so it greatly extends the motor life by many folds.
Brushless main motor conversion parts included are as follows:
1. Turbo Ace (C05) brushless motor with 8 teeth pinion and motor pins installed
2. TheSteve MCPX-PCB converter integraded with the XP-7A-5 7A ESC. No soldering is needed for the entire kit.
This kit is integrated in the USA.
Disclaimer: Brushless conversion applications are extremely sensitive and experimental, Wow Hobbies makes no guarantees, nor accept any returns for any of the conversion parts or any items containing electronics. We are not obligated in anyway to help you complete your brushless conversion. A conversion diagram is provided on this site for your reference only. For additional help go to: http://www.rcgroups.com/forums/showthread.php?t=830186
|
|
|