Brushless Tail Kit For 4#3B/CB100/V100D01 Novus FP: 29701 (HP03) 2.9g BL Tail Motor, Carbon Holder & Locking Clip, Red Bracket, Wire Set, Manual

Why is the 2.9g Turbo Ace 29700 brushless tail motor a better choice than the Walkera 2g tail motor which is the Turbo Ace 27700 motor? We carry both motors and we think you should know the difference when you are paying extra. The 2.9g motor has about 50% more torque/power and it comes with double bearings versus the 2g with no bearings. The bearings significantly reduce the operating temperature in flight and prolongs the life of the motor!

 

This tail kit includes 2.9g C-shape feather weight (a mere 0.5g) tail motor carbon fiber stand with CNC tail boom clamp and a  2.9g BL outrunner motor and brushless wire set. Put an end to crack / twisted tail boom, the CNC tail boom clamps the round tail boom instead of using a sharp screw that cracks it. Also the motor is secured by an exclusive motor-locking clamp. A brushless tail ESC such as a Flea brushless tail ESC with build-in converter is required. This combo does not include the Walkera tail ESC which is needed to drive this 2.9g brushless motor. Also the tail rotor on photo is not included. This tail holder fits V100D01, 4#3B, CB100 & Novus FP round booms, a CNC metal bracket with 2 screws clamps the boom. Though this C-shape tail holder looks similar to the tail holder available in China, it is not the same. The motor in this kit is secured by a Wow Hobbies exclusive motor-locking-clamp instead of the standard glue-on design so the motor will not dislodge from the tail holder during a crash. Since no glue is needed to attach the motor to the tail holder, the motor can easily be removed for service. For your convenience, the motor and the tail motor holder have been assembled together. At most, a tiny drop of locktite to keep the motor from turning inside the holder is recommended and no gluing is necessary.

 

It is important to match up this brushless tail kit with a more powerful main motor such as the Turbo Ace 81016 or the Turbo Ace 411500 high performance BL motor. Important! Buyers beware, when you purchase a tail holder, make sure that it comes with a locking device for the motor, either screws or a locking clamp to secure the motor otherwise the tail motor can be easily detached with vibration or during a crash, resulting in total damage of your BL tail motor. This holder fits 4#3B round boom and includes a carbon fiber tail stand.

 

 

Holder Weight: 0.5g including CNC holder and carbon fiber tail stand

Motor: 2.9g BL outrunner
The wire gauge is 0.13, it is Delta winding.