Feather Wt. 2.5g Turbo Ace 25700 Dual Bearing BL Outrunner Motor + Carbon Tail Stand/Holder, Red CNC Bracket: For 4G3, V120D03 & Novus CP Square Boom

This super light weight 2.5g dual bearing Turbo Ace 25700 brushless tail motor with integrated .7g Carbon Stand/Holder for 4G3, V120D03 & Novus CP feature significantly improved tail hold with outstanding power and durability.

This brushless tail kit features:
* Turbo Ace 25700 Brushless Out-runner Motor (40% more torque than Walkera stock 2g brushless motor) for a big improvement in tail hold when you punch the throttle.
* Combination Carbon Fiber Tail Stand/Holder versus the separate stock plastic tail stand and motor holder which is much heavier.
* Red CNC Metal Bracket tightened by 2 screws that fits the 4G3 and the Novus CP square boom like a glove. No more cracked booms.

Note: Integrating this powerful and advance dual bearing motor with carbon stand is as easy as 1-2-3. The carbon tail stand features CNC bracket mount to secure the tail assembly without cracking the tail boom. The 25700 motor comes assembled on the carbon tail stand and all you have to do is (1) solder the 3 motor wires to the 3 Tail ESC wires coming out of the tail boom (2) if the tail rotor direction is turning in the wrong direction switch any of the 2 wires that you have just soldered (3) insert the square boom between the red CNC bracket and the carbon stand and tighten it with the two screws that comes with this package.

 

If you don't have the tail ESC already, you will need to purchase the tail ESC and the Brushless Wire Set separately. Tail rotor on the picture is not included.