| | |
| Wow Search Header
Wow Search Footer | |
| | |
|
|
HM-4G3-Z-3916: Walkera Brushless Motor With Upgraded 16 Teeth Pinion For 4G3/4G6/4#3B/CB100/Novus CP/FP
|
Item Number: MT-3916 (Walkera with 16T)
|
This is a 4G3 motor model 003 customed to 16 teeth pinion for increase power on 4G6 and 4G3 3D flight. It offers increase performance and runs at lower temperature than the stock 4G6 main brushless motor model 005. Both motors tested with 16T pinion installed on the 4G6 and 4G3. The HM-4G3-Z-3916 is also highly recommended for the 4#3B and CB100 provided that you match it with the 2.9g brushless upgraded tail motor otherwise the brush or 2g brushless tail motor will not have enough force to counter the additional torque produced by the higher head speed. Custom fitting pinion on a motor is an extremely difficult task, especially on the smaller motors where pinions can be skewed, slips and motor shafts can easily be bent or damaged during the process. Let us do the fitting for you!
If you are looking for an upgraded 4G3 or 4G6 main motor, we highly recommend that you look into the 31714 or the 81220 instead of this stock motor with a 16T pinion.
Brushless motor requires ESC (Electronic Speed controller) to function.
Shaft size same as Feigao and Losi: 1.5mm (actual 1.42mm)
Gear pitch: same as 4G3:
Pinion: Includes a custom fitted 16 teeth brass pinion (Walkera standard motor pinion is 12 teeth)
Speed: 11,000kv (actual appx 15,000kv)
Weight: 10.9g |
|
|