CE700 & 411516 Brushless Feather Programmable Kit: Turbo Ace CE700 Converter/ESC & 411516 (16T) 4.5g BL Motor, Compatible with Rx2406 on 4#3B/Novus FP

<< Previous in Brushless 1-S

Next in Brushless 1-S >>

Price: $45.95

Out of stock

Part Number: EK-CE700+411516

Manufacturer Part No: B10

Email this page to a friend

Feather weight brushless conversion kit.

This programmable brushless upgrade kit allows you to save your existing receiver and put it into better use. Why throw away your perfectly fine Rx2406 receiver with servo travel adjustments and settle for a Rx2406A brushless kit without travel adjustments that also costs twice as much? This kit comes with the programmable Turbo Ace CE700 Converter/ESC designed from the proven reliable ESC A.K.A. Ebay ESC and TheSteve converter that are highly compatible to brushless motors. Even if you already own a RX2406A or other Walkera brushless receivers, this kit will be an excellent brushless system since the ESC is programmable. Wow Hobbies has taken special care in testing this Converter/ESC with all the currently available BL motors for the Walkera 4#3B heli. The programmable Converter/ESC included in this kit is rated at 7A which will enable extreme heli manuevers compares to other Converter/ESC rated only at 5A that often cogs at startup or shuts down from current overload during acceleration. The only ESCs as of May 2009 that have successfully worked with the 4.5g motor on the 1 cell Walkera 4#3B and 4G3 are this CE700 (Ebay ESC/TheSteve converter) and the V3 Flea made in Germany. According to RC Group test results, the incompatible of ESC to the 4.5g motor includes Walkera's own brushless ESC and AEO ESC/converter that integrates with the 4.5g motor both have improper timing/ firmware/current to synch with the 4.5g motor.

The Turbo Ace CE700 is the least expensive and the most reliable way to convert your 4#3B brush heli to brushless. It allows you to use your existing Rx2406 receiver to convert the Walkera 4#3B brush main motor to brushless. It's plug and play. No more studying complex conversion diagram, just plug it in, drill 2 holes on the main frame to fit the 4.5g BL motor and solder only one wire to the Rx2406 receiver. Here are the benefits of what this conversion kit offers.

1. Using your exsiting Rx2406 receiver beats buying a new Rx2406A receiver which lacks travel adjustments for the servos.

2. The Turbo Ace CE700 Converter/ESC is programmable which allows you to fine tune your ESC for improved performance verses stock Walkera ESC which is not programmable.

3. Pay only half as much by saving your old Rx2406 verses buying a brushless conversion kit with the Rx2406A receiver.

4. This kit has been fully tested to fly on the Walkera 4#3B and Novus FP helicopters under extreme maneuvers.

5. This kit is compatible to RX2400, RX2400BL, RX2406, RX2406A, RX2600, RX2605, RX2605A receivers so it not only just works on RX2406/RX2605.

6. This 4.5g brushless conversion kit can be installed in less than 20 minutes.

7. This is a feather weight setup which is the lightest for your 4#3B heli. The included Ebay ESC has been tested to drive the 4.5g BL motor through extreme accelerations without startup or ESC shutdown problems.

Brushless conversion kit includes

1. Turbo Ace CE700 CONVERTER/ESC (TheSteve converter and Ebay ESC made simple for plug and play-ESC is programmable using the available Ebay ESC programmer)

2. 4.5g brushless motor with 16-T pinion installed.

3. Walkera 3-pin motor connector.

4. Motor screws for the 4.5g motor. New motor mounting holes may need to be drilled on the main frame to fit 4.5g motor.

5. Complete installation instructions with photos.

Specifications:

To see full manual click on http://wowhobbies.com/images/products/detail/EbayESCbrushlessconversionkitmanualJPG.1.jpg

CE700 ESC with converter Weight: 2g without wirings

CE700 ESC with converter Weight: 3.7g with reduced wiring (same weight as the Walkera ESC)

CE700 ESC with converter Weight: 4.5g with all wirings

7A, 1-2 cell