| | |
|
| |
| | |
|
|
Home > MOTORS & ESC > Brushless 1-S > XP-12A-2 (VER 2) EBAY BL ESC 1-2 Cell. Increases head speed by 5%-8% and upgrades 1 & 2 Cell Helis (e.g. M120D01, V120D02/S/03/05/01, 4G6/S, 4#6/S)
XP-12A-2 (VER 2) EBAY BL ESC 1-2 Cell. Increases head speed by 5%-8% and upgrades 1 & 2 Cell Helis (e.g. M120D01, V120D02/S/03/05/01, 4G6/S, 4#6/S)
|
|
Retail: $34.95
Price: $19.95
You Save: $15.00 (43 %)
Part Number: WWO-ESC-XP-12A-2
Manufacturer: WOW
Manufacturer Part No: WWO-ESC-XP-12A-2
|
XP-12A-2 version 2 with improved firmware that gives outrunner 5-8% additional head speed ( power boost). It wakes up the old HP08 and retains the same flight time. Includes Walkera battery & receiver plugs installed. It comes plug and play for Walkera 1 cell heli. This is the higher current brother of the common XP-7A-2 ESC that improves startup on the outrunner motor.
Version 2 includes Walkera receiver plug, 1 cell battery connector and motor connector as shown on photo.
This programmable brushless ESC comes with Walkera battery and receiver BEC plugs. Outrunner brushless motors should be directly soldered to the ESC for best startup performance as shown on photo. This item includes one piece of ESC.
This XP series of brushless ESC such as the Ebay XP-7A, XP-12A are developed for 1 to 3 cell micro helicopters and fixed-wing aircrafts. Features 4 seconds very soft start which is especially suitable for helicopters. Its braking feature is ideal for folding propeller aircrafts. The XP series ESC are programmable. Optional programmer is available at http://www.wowhobbies.com/xp-7aebayblescprogrammer.aspx
Features:
- Equipped with high-speed, small-sized, multifunctional MCU.
- Low-voltage protection, over-heat protection, signal lost protection, safe power on protection, and self-check functions.
- 4 seconds very soft start performance which is ideal for helicopters.
- Excellent startup performance for the outrunner brushless motors, great throttle linear and quick throttle response, excellent low-speed performance.
- Max speed: 240,000 RPM (2 poles), 80,000 RPM (6 poles), 40,000 RPM (12 poles).
- Individual power circuit for MCU and BEC to improve anti-interference capability.
- The parameters of ESC can be configured via programming card or transmitter.
- Built-in linear BEC or switch mode BEC.
- The low-voltage threshold and start-up power can be programmed by the optional programming card.
- Throttle range can be configured to be compatible with different receivers.
- Three throttle curve options make helicopter control more flexible.
- Motor reverse rotation. Swap any 2 of the 3 motor wires to reverse motor direction.
|
|
|