Turbo Ace Linear CG Battery 650mAh 2S (7.4V) 25C LiPo: For Upgraded Walkera 4G6S, 4#6S/BELL, V120D01/02/03/05 & M120D01, Not for Stock Walkera Helis

2 Cell battery- Not for stock Walkera helicopters.

Requires you own an upgraded micro motor with 2 cell specification such as http://www.wowhobbies.com/turboace81200hp08brushlessmotorexceptionallyhighperformancethermo-coolbrushlessmotorforwalkera4g6-1-2.aspx

 

and ESC that will support 2 cell operation such as this for 4G6/S, V120D01/02

or this for M120D01, V120D05, 4G6/S, V120D01/02

 

Fits inside battery cage of Walkera 4G6/S, 4#6/S/BELL, V120D01/02/03/05, M120D01 & Novus 125 CP/FP. Requires trimming the front side of the 4G6/V120D01/2... battery tray to allow battery to slide in from the front. On the M120D01 and V120D05, you only need to remove front battery tray bar for battery to fit in. Repositionable for center of gravity with 1.2 inch lateral range, thanks for the extra length design for the best possible CG on the Walkra 4G6, 4#6, V120D02 & Novus 125. Linear batteries are known for its reputation of consistency in power delivery, discharge rate and high recharge cycles. Most important of all, it delivers the extra head speed and torque necessary for hardcore 3D. The 400mAh battery has long been receiving the highest consumer rating for use on the Walkera helicopters including the 4G6S/4G6/V120D01/V120D02 & Novus 125 FP/CP and now the 650mAh is available using the same manufacturing process and technology.

Weight: 34.5g including JST battery connector

Dimension 24.5mm wide x 9.75mm thick x 68.7mm long

Capacity: Linear discharge current- True 650mah 25C 2-Cell- Not for stock Walkera helicopters
Flight time: appx 10-14 minutes on a Walkera 4G6 or V120D02 brushless helicopter

Discharge current: Almost linear through out the entire flight