| | |
|
| |
| | |
|
|
Home
LM 3 Ver Wow3 & WK-2801PRO-100mW & Neck Strap ,Aero-Ext Shaft & Collar, Heli & Tx Batteries, Extra Main Blades - Includes int'l freight to outside USA
|
|
Price: $499.95 Free ship- Now Shipping
Out of stock
Part Number: LM 3 Ver Wow3 & WK-2801PRO-100mW
|
Difference between a stock version of Lama 3 and this custom Wow3 version of the Lama 3.
The stock Lama3 comes with a short main shaft so the top and bottom blades easy trikes each other when you bank the heli in a turn and the heli crashs. With the Wow 3 version, we have replaced the stock main shaft with extended shaft and guarantee the blades will not strike each other no matter how hard you turn or bank the heli. Since the extended shaft of Wow 3 is made of Aero space material, we have not seen a bend main shaft even with light crashes. Replacing the main shaft can be time consuming and difficult as the stock shaft bends easily when the stock Lama3 blades scrap the ground.
At Wow, all our RC helicopters are triple inspected and tested. After Walkera completes the initial post production quality assurance test, each shipment is tested again by Wow's Shenzheng, China QA Center. The third and final test by Wow's California Warehouse includes an actual hover/gyro test and a multi-point inspection of parts and mechanisms. Disclaimer, since Wow Hobbies is not the manufacturer of this helicopter, we are unable to control factory QA. Due to the size of this helicopter, it is the responsibility of the customer to re-locktit all screws to make sure it is safe. It is a common practice to remove each screw and make sure locktite is applied. This is ture even if it a name brand such as the Align Trex450 as discussed oi the Helifreak forum.
Coupon does not apply to this item. Shipping is included and insured to your destination. You can only add some Lama 3 parts and other tiny tiny parts and they will be shipped free with the helicopter. If you add too many parts or heavy parts, the shipping will not work and you will not be able to checkout unless you split your shipment to 2 orders.
Please make sure you are home to sign for this package from the Post Office.
Lama 3-Wow3 version is currently the ultimate in coaxial out door performance. It is easy to hover for beginners but yet it can cut through up to 7mph wind. This is a beginner/intermediate pilot's dream. See newest videos:
The $499.95 RTF Package includes the Lama 3 heli plus the following extras:
$158.88 Value. WK2801 Programmable 100mW Radio & Neck Strap.
$19.95 Value. Areo-Extend Collar.
$14.95 Value. Aero-Extend Shaft.
$50 Value. Labor on Aero-Extend Shaft & Collar custom installation, radio and receiver programming/adjustment and No DOA guarantee.
$24.95 Value. 2200mAh 15C Tranmistter lipo battery. See detail http://www.wowhobbies.com/transmitte...801radios.aspx
NEW ITEM- includes Lama3 Helicopter with WK2801pro programmable radio, Aero-extend harden stainless steel shaft and Aero-extend aluminum alloy collar. Custom tunning, swash travel adjustment unlocked from stock setting and flight tested by a Wow technician. We have chosen not to include the stock collar and main shaft in this package as injury may occur from blade strike. Please resist the temptation to purchase a stock shaft or collor whe the extended shaft is out of stock. We will have them available within a week if we are sold out. To release our liability, the stock collar and shaft will not be listed in our Lama 3 parts catagory.
This is the new Lama 3 version Wow3 with WK2801-PRO-100mW programmable radio. Featuring Aero-Extend extended main shaft and collar made frome USA aerospace steel #17-4 PH and aluminum alloy.
Wow Hobbies will install the mod with the Aero-Extend shaft and collar, make the servo travel adjustment, flight test the heli and box it up without yanking the mod parts and it will fly out of the box. So the RTF and the Bind-and-Fly custom Wow3 versions both will include Aero-Extend shaft and collar, custom installation, travel adjustments to fly in windy condition, flight test and no DOA (dead on arrival) guarantee. If you add all these up, they can easily cost additional $100, so do the math on labor + custom parts + guarantee + low shipping cost. We have a special way to pack the heli even thou it is 1.3 inch taller and it will arrive safely to destination.
Additional test has been conducted on the stock Lama 3. After our prelimary stock Lama 3 test flights, we have examined the stock shaft and had discovered significant wear from the one way bearing (Appx. 5-8 battery flights). The cause of this was attributed by the one way bearing design of the LM3 (nothing wrong with the design, it just needs better material), the steel material used and the way the shaft was nickel plated. Pieces of nickel plates have flaked off and a good layer of steel has been worn out. To address this issue, the following process has been carefully implemented in the Aero-Extend shaft of the LM3 Wow3 version . Just for clarification, the Aero-Extend shaft is not made by Extreme and they are not be nearly comparable under the same classification of material and composition.
1. Unlike the grade of steel used on the Walkera stock shaft and other compatible shaft. The aerospace 17-4 PH hardened steel material used on the Aero-Extend shaft withstands wear and tear under streme conditions.
2. By selecting the aerospace grade steel, the Aero-Extend shaft does not need to be nickel plated (it does not corrode without the plating), therefore no nickel plate fall out problem from the stock nickel plated shaft.
3. Due to the length of the shaft, tensile strength plays an important factor in preventing the shaft from bending during a crash. Aerospace grade steel (Made in the USA) becomes a necessary ingredient of a well built shaft that snaps back to its original shape even after a light crash.
4. Aero-Extend shaft is longer than stock shaft, keeping the bottom blades from striking the top blades when the helicopter banks in a turn.
5. The extended aluminum alloy collar is made of high tensile strength aluminum that resistant wear and tear. It is anodized in USA with aerospace specifications. It is composed of aluminum alloys that resist bending.
In summary, it is not only important that the Aero-Extend shaft prevents the Lama3 blades from striking but it is also more durable and resistant to damage in a crash.
Specification
Main rotor diameter (upper/lower): 620mm
Small shaft length is 10.05 inches (1.3 inch longer than the 8.75 inch stock shaft)
Overall length:666mm
ESC:WK-WTS-40A-1ALL-UP
Weight:833g(battery included)
Brushless motor:WK-WS-28-007W
Gyro:built in 3D gyro
Receiver: RX-2429 (4 channel 2.4gHz)
Transmitter:WK-2801 PRO 100mW version
Helicopter battery:11.1v 2200mah li-po 25c included
Transmitter battery:11.1v 2200mah li-po 15c included
Servo:WK-7.6-6
Charger included- balance charges 2 to 3 cell battery
Feature
Coaxial collective pitch system- Does not fly inverted.
Single brushless motor driven system
Wind tolerant: Up to 7 mph wind
Coaxial stability making it easy for the beginners
Can be used for aero video and photography
|
|
|