HP-LG325-0160-1S-UM (HP25C01601SU): Hyperion G3 CX - 1S 160mAh for Ultra Micro and Minium Series (25C) for Blade MSR, MSRX, MCX, &MCX2 Helicopter

• Slightly longer than the 130mAh, but otherwise the same size
• Weight: 4.55g
• Dimensions: 43.0 x 11.1 x 6.0 mm
• G3 Technology Lipo
• 5C Speed Charging OK
• 4 x Longer Cycle Life

These are a major upgrade for Eflite Ultra Micro and Kyosho Minium series micro RC models, and fit either without modification. With Hyperion's G3 technology inside, they deliver more mA per gram than the stock batteries, while sustaining higher voltage under high loads, for greatly improved power performance. Of course, like all Hyperion G3 Lipo they last for hundreds of cycles, with consistant performance, when properly charged and stored.

NOTE: After Feb 10th 2010, see also HP-LGUM6PADAP, the Hyperion Six-Port parallel charge adapter for "UM" packs, with 4mm gold bullet connectors for connection to quality chargers.

Hyperion Generation 3 Lithium Polymer Packs are proving truly revolutionary in both performance and value. Compared to an average of the batteries on market last year, they provide up to up to 7x more cycles under the same discharge conditions. And that makes them a bargain price-wise.

But they also deliver the highest voltage and flattest discharge curves under load that we have ever seen, which makes them the best performer you can buy. And tests have shown that at the 70%-discharged point in flight, they are delivering as much as 40% more power than previous generation LiPo.

The fact that they can be safely charged at up to 5C/6C rates - for charge times as low as 10 to 12 minutes - is just icing on a very tasty cake.

The G3 packs are made with a new Hybrid RS construction technology, super-fine substrate materials, rigorous ISO 9001 Quality Control, and final cell matching process, which all guarantee you not only this superb performance, but also tightly balanced and long-lasting packs.

The G3 LiPo come in three series. "CX" 25C are appropriate for most models and deliver high capacity and power per gram at low cost. The "VX" 35C series is the one for applications that need the high voltage maintained at high discharge rates; for example highly aerobatic 3D airplanes and helicopters. "EX" 45C provide extreme voltage-holding capability for high output applications like pylon racers or other very fast models, LMR glider competition, and many EDF jets.

Check'm out, you'll be glad you did.

CLICK HERE FOR FULL SPECIFICATIONS