HM-4F180-Z-17 (HM-CB180-Z-31,HM-CB180Z-Z-31): Battery for Walkera 4F180, CB180Z/D/Q, V200D01/DQ01/D02 & UFLY/S

Price: $19.25 Equivalent part is HM-CB180-Z-31 or HM-CB180Z-Z-31

Out of stock

Part Number: HM-4F180-Z-17 (HM-CB180-Z-31, HM-CB180Z-Z-31)

Manufacturer: Walkera

Manufacturer Part No: HM-4F180-Z-17

It's a good idea to charge up a few extra batteries before each session to minimize down time. Environmentally friendly, this high quality original stock Walkera battery packs plenty of power in a small package and provide extended flight time after time

http://www.wowhobbies.com/hm-cb180-z-31battery.aspx
or
http://www.wowhobbies.com/hm-180z-z-31battery.aspx

Walkera Stock battery specification

1000mAh

15C

2-Cell (7.4V)

Here is the link to the upgraded GE Power 1200mAh 25C Battery which give you more flight time and power at a lower cost.

http://www.wowhobbies.com/batteryforcx2900mah15clipo-1-2-1.aspx

Related Products

HM-CB180-Z-10-92 (WWD-PP-CB180-Z-10-92): Stay-True Upgrade Main Shaft, for Walkera CB180D, CB180Q, CB180Z, V200D01/02 & V200DQ01, Made in USA Price: $17.95 It is practically indestructible. Sustains most crashes and bounces right back to its true form. It is make of Aero space high tensile strengh steel. You can recover your investment from just one crash by saving labor, shipping, parts & time. Make in USA.	Don't forget your tools! Under "tools" category Price: Visit our fast expanding TOOLS section	GE Power Battery 1200mAh 2S (7.4V) 25C Lipo: JST Connector, For Walkera CB180Z/D/Q, V200D01/D02/DQ01, Esky Lama 3/4 & Other 2-Cell Applications Price: $15.95 Quantity: 1200mAh 25C high capacity and high discharge rate 2-cell (7.4V) lipo battery custom sized to fit in the CB180Z, CB180D, CB180Q, V200D01, V200DQ01 & V200D02 battery cages. You can also use this battery on the UFLY, UFLYS, Esky Lama 3 & Lama 4 helicopters.	GE Power Battery 860mAh 2S (7.4V) 20C Lipo: JST Connector, for 2-Cell Applications, for Walkera UFLY, UFLYS, Esky Lama 3 & Lama 4 Price: $12.95 Quantity: GE POWER 860mAh 20C high discharge rate 2S (7.4V) lipo battery for the Walkera UFLYS & Esky Lama 4 helicopter. Dimensions: 55mm (L) x 30.5mm (W) x 15.5mm (H) Weight: 48g which helps to correct UFLYS' center of gravity to the middle.
UNIVERSAL Dual Capacity Helicopter Case: Heavy Gauge Aluminum, Custom Cut-Out For One 250/300 + One Micro/Sub-Micro + Tx + Parts/Tools Price: $49.95 Quantity:	Glue & Lube Set: CA Strong Bond Glue, Thread Lock, Grease & Anaerobics Steel Bonding Adhesive - Bottles are 20% - 25% filled. (Not full bottle). Price: $4.95 All 4 bottles are only 20%-25% full Quantity: Due to air shipping specs, all 4 bottles are 20% - 25% filled (about a quarter of a bottle) to prevent messy air shipping spills. We have adjusted the price accordingly so you will have a little bit of glue, lock, grease & adhesive for a few bucks.	HM-60B-Z-35 (HM-CB180-Z-32, HM-UFLY-Z-34) 220V: Balancer Charger, 2-Cell & 3-Cell Operation (Not for USA, Canada & Japan) Price: $23.95 Quantity: This 220V wall balancer charger is suitable for Europe and other international applications. The plug will not fit with 110V applications in the USA, Canada and Japan.	HM-60B-Z-35 (HM-UFLY-Z-34, HM-CB180-Z-32) 110V: Balancer & Charger, 2-Cell & 3-Cell Operation, For USA, Canada & Japan Price: $23.95 Quantity: Instead of this standard charger, we highly recommend that you get the CX450-50-01 Balancer Charger which is a premium quality charger that costs about the same and is very reliable and easy to use.
HM-CB180-Z-01: One Set of Main Rotor Blades for Walkera CB180D, CB180Q, CB180Z (Maximum Per Order: 3 sets due to limited allocation.) Price: $3.95 (Replacement HM-CB180Z-Z-01) Quantity:	HM-CB180-Z-0190 (3 Sets): 3 Packs of Main Rotor Blades Set for Walkera CB180D, CB180Q, CB180Z (Please limit your order to one 3-pack due to shortage) Price: $10.50 (Please limit your order to one 3-pack due to shortage.) Quantity: Save on 3 sets of these Main Blades which can be used on the CB180D/CB180Q/CB180Z helicopters.	HM-CB180-Z-02 (Orange): Tail Rotor for Walkera CB180Q, CB180D, V200D02, V200DQ01 Price: $2.95 Quantity: Orange tips on this tail rotor is the best color match for the CB180Q & V200D02. Fits the V200DQ01 but color is slightly different.	HM-CB180-Z-02 (RED): Tail Rotor for Walkera CB180D & V200D02 Price: $2.95 Quantity: These red tips tail rotor is works great with Walkera CB180D & V200D02 helicopters. Due to current shortage please limit your purchase to 5 rotors per order so everyone can keep their helicopters flying. Thank you for your cooperation.
HM-CB180-Z-03-D-RED: Main Blades Holder for Walkera CB180D, CB180Q, CB180Z, Red Color Price: $8.95 Quantity: Red color	HM-CB180-Z-03-Q-ORANGE: Main Blades Holder for Walkera CB180Q, CB180D, CB180Z- Gold color Price: $8.95 Quantity: Gold color	HM-CB180-Z-04: Bellcrank Set for Walkera CB180D, CB180Q, CB180Z Price: $7.70	HM-CB180-Z-05 (Aluminum Color): Rotor Head for Walkera (Metal Version) CB180D, CB180Q, CB180Z Price: $18.95 Quantity:
HM-CB180-Z-06-D-RED: Swashplate for Walkera CB180D, CB180Q, CB180Z, Red Color Price: $16.95 Quantity: Red color	HM-CB180-Z-06-Q-ORANGE: Swashplate for Walkera CB180Q, CB180D, CB180Z- Gold Color Price: $16.95 Quantity: Gold color	HM-CB180-Z-07: Flybar for Walkera CB180D, CB180Q, CB180Z Price: $1.49 Quantity:	HM-CB180-Z-08: Flybar Connector for Walkera CB180D, CB180Q, CB180Z Price: $3.50 Quantity:
HM-CB180-Z-09: Ball Linkage Sets for Walkera CB180D, CB180Q, CB180Z Price: $1.49 Quantity:	HM-CB180-Z-10: Main Shaft for Walkera CB180D, CB180Q, CB180Z, 4F180, V200D01, V200DQ01 , V200D02 & V200DQ01 Price: $2.99 Quantity: The CB180Z, CB180D, CB180Q, V200D01, V200D02 & V200DQ01 all use the same main shaft. The collar ring included as one of the part of thispackage can also be used on the Walkera 5#10 helicopter to secure the main shaft.	HM-CB180-Z-11: Tail Shaft for Walkera CB180D, CB180Q, V200D02 & V200DQ01 Price: $2.45 Quantity:	HM-CB180-Z-12: Tail Boom for Walkera CB180D, CB180Q, V200D02 & V200DQ01 Price: $2.45 Quantity:
HM-CB180-Z-13: Tail Drive Shaft for Walkera CB180D, CB180Q, V200D02 & V200DQ01 Price: $2.45 Quantity:	HM-CB180-Z-14: Heat Sink for Walkera CB180D, CB180Q, V200D02 & V200DQ01 Price: $3.75 Quantity:	HM-CB180-Z-15: Main Gear for Walkera CB180D, CB180Q, CB180Z, 4F180, V200D01, V200DQ01 , V200D02, V200DQ01, and Airwolf 200SD3/5 Price: $3.95 Quantity:	HM-CB180-Z-16: Tail Gear Set for Walkera CB180D, CB180Q, V200D02 & V200DQ01 Price: $3.85 Quantity:
HM-CB180-Z-17: Servo Holder for Walkera CB180D, CB180Q Price: $1.95 Quantity:	HM-CB180-Z-18: Main Frame for Walkera CB180D, CB180Q, CB180Z Price: $5.95 Quantity:	HM-CB180-Z-19: Tail Motor Holder for Walkera CB180D, CB180Q, V200D02 & V200DQ01 Price: $2.45 Quantity:	HM-CB180-Z-20D: Battery Frame for Walkera CB180D, CB180Z, 4F180, V200D01 & V200D02 Price: $2.99 Quantity:
HM-CB180-Z-20Q: Battery Frame for Walkera CB180Q & V200DQ01 Price: $3.85 Quantity:	HM-CB180-Z-21D: Tail Gear Holder for Walkera CB180D & V200D02 Price: $2.50 Quantity:	HM-CB180-Z-21Q: Tail Gear Holder for Walkera CB180Q & V200DQ01 Price: $2.50 Quantity:	HM-CB180-Z-22D: Skid Landing Set for Walkera CB180D, CB180Z, 4F180, V200D01 & V200D02 Price: $3.95 Quantity:
HM-CB180-Z-22Q: Skid Landing Set for Walkera CB180Q & V200DQ01 Price: $2.95 Quantity:	HM-CB180-Z-23D: Canopy for Walkera CB180D Price: $6.95 Quantity:	HM-CB180-Z-23Q: Fuselage for Walkera CB180Q Price: $19.95 Quantity:	HM-CB180-Z-24D: Stabilizer Set for Walkera CB180D, V200DQ01 & V200D02 Price: $3.95 Quantity:
HM-CB180-Z-24Q: Vertical Stabilizer for Walkera CB180Q Price: $3.45 Quantity:	HM-CB180-Z-25D: Tail Strut for Walkera CB180D, CB180Z, 4F180, V200D01 & V200D02 Price: $3.95 Quantity: Package includes 2 CNC canopy mounting posts	HM-CB180-Z-25Q: Decoration Set for Walkera CB180Q Price: $3.85 Quantity:	HM-CB180-Z-26: Bearing Set Price: $5.78 Quantity:
HM-CB180-Z-27: Screw Set Price: $3.85 Quantity:	HM-CB180-Z-28 (HM-V200DQ01-Z-04): RK-370SD Main Motor, For Walkera CB180D, CB180Q, V200D02 & V200DQ01 Price: $9.63 Quantity:	HM-CB180-Z-29: Tail Motor, For Walkera CB180D, CB180Q, V200DQ01 & V200D02 Price: $11.95 Quantity:	HM-CB180-Z-30: Servo (7.6g-3), For CB180Z, CB180D, CB180Q, V200DQ01 & V200D02 Price: $25.95 Quantity:
HM-CB180-Z-32 (HM-UFLY-Z-34, HM-60B-Z-35) 220V: Balancer Charger, 2-Cell & 3-Cell Operation (Not for USA, Canada & Japan) Price: $23.95 Quantity: This 220V wall balancer charger is suitable for Europe and other international applications. The plug will not fit with 110V applications in the USA, Canada and Japan.	HM-CB180-Z-33: Receiver (RX2423) Price: $34.95 Quantity:	HM-CB180Z-Z-04: Rotor Head Set (Black Plastic Version) for CB180D, CB180Q & CB180Z (Plastic Version) Price: $9.95 Quantity: Caution: HM-CB180Z-Z-04 is the plastic version of the Rotor Head Set. It is more resistant to deformation after a crash compared to the metal rotor head.	HM-CB180Z-Z-22-96: Extended Cyclic Servo Horn or Regular Tail Servo Horn (Arm) for CB180D, CB180Q, CB180Z, V200D01, LAMA3, 4F200 Cyclic Servo Price: $3.99 Quantity: Extended servo horn/arms allows for additional servo travel for added cyclic maneuverability. Or you can use this to replace the tail servo horn/arm.
Walkera 220V Balancer & Charger: 2-Cell & 3-Cell Operation with Wall Plug (Not for USA, Canada, Mexico, Japan & Taiwan) (HM-UFLY-Z-34-220V) Price: $23.95 Quantity: This 220V wall balancer charger is suitable for Europe and other international applications. The plug will not fit with 110V applications in the USA, Canada, Mexico, Japan & Taiwan.	Hybrid Head Kit to Convert the CB180D, CB180Q, CB180Z & V200D01 to fly outdoor in the wind Price: $89.95 Quantity: Convert your CB180D/Q/Z & V200D01 to the Hybrid (Uflys head) with Hybrid-Stay-True shaft. Now you can grow with the helicopter from rockie to advanced by changing the head. It's like owning 2 helicopters.	Walkera WK-2402 Transmitter: 2.4GHz, 4-Channels, LCD Screen, For All Walkera & Novus Fix-Pitch & Co-Axial, SALE !!! SALE !!! Price: $49.95 Quantity: The Walkera WK-2402 Transmitter is compatible with all Walkera and Novus 4-Channel 2.4gHz helicopters.	Walkera WK-2403 Transmitter: 2.4GHz, 4-Channels, Dual Rate & Height Limit Dial/Switches, For Walkera & Novus Fix-Pitch & Co-Axial Helicopter Price: $39.95 Quantity: The Walkera WK-2403 is compatible with all Walkera and Novus 4 channel 2.4gHz helicopters.
Walkera WK-2801-PRO (Ver 2.3) Transmitter + 2200mAh TX Lipo Battery: Programmable, 2.4GHz, 8-Channel, For All Walkera & Heli-Max Novus Helis Price: Sale $169.95 (Reg. $209.95) Quantity: Compatible to all the latest 3-Axis Walkera receivers such as RX2433, RX2435, RX2437S, RX2610S and Heli-Max Novus equivalents.... ETC.	Walkera WK-2801-PRO (Version 2.3) Transmitter: Programmable, 2.4GHz, 8-Channels, For Walkera & Novus Helicopters !!! Big Sale Sale Sale !!! Price: Sale $139.95 (Reg. $179.95) Quantity: Compatible to all the latest 3 axis Walkera & Heli-Max Novus receivers such as RX2433, RX2435, RX2437S, RX2610S & Heli-Max Novus equivalents.