| | |
|
| |
| | |
|
|
Home > MOTORS & ESC > Brushless 2-S > HM-CB180Z-Z-24-94: Upgraded Super Turbo Ace 352 Brushless Motor with Pinion & Connector, For CB180Z/PRO/HYBRID/V200D01
HM-CB180Z-Z-24-94: Upgraded Super Turbo Ace 352 Brushless Motor with Pinion & Connector, For CB180Z/PRO/HYBRID/V200D01
|
|
Part Number: TTL-MT-352-13 (HM-CB180Z-Z-24-94)
Manufacturer: Turbo Ace
Manufacturer Part No: TTL-MT-352-13
|
When installed on the CB180Z-pro, CB180Z-pro-Hybrid the Turbo Ace 352 (2-cell ) motor out powers the 3-cell upgraded Uflys. This high performance motor is recommended for outdoor flying. Beginners, watch out for the extra speed. It requires a minimum of 20C high discharge battery to operate. It comes with the pinion installed and it's plug-n-play for your CB180Z, CB180pro, CB180pro-Hybrid, V200D01. Uses your existing stock motor screws. Motor mounting holes are identical to the CB180Z motor. Go to http://www.wowhobbies.com/batteryforcx2900mah15clipo-1-2-1.aspx
The following applies to CB180Z-Pro-Hybrid only (Does not apply to CB180Z or CB180Z-Pro)
When using this high torque motor on a CB180Z-Pro-Hybrid, it is recommended that you increase the flybar length by changing to the flybar such as the one used on Align Trex450, goto http://www.wowhobbies.com/agnhs1264flybarrod220mmstainlessfort-rex450.aspx Also on the Hybrid's 3-axis gyro gain for the elevator and aileron, they may need to be turn down a bit to reduce over correction.
Shaft size: 2.0mm
5200kv
2 cell
Pinion installed
|
It is practically indestructible. Sustains most crashes and bounces right back to its true form. It is make of Aero space high tensile strengh steel. You can recover your investment from just one crash by saving labor, shipping, parts & time. Make in USA.
|
|
|
Price: $4.95 All 4 bottles are only 20%-25% full
Due to air shipping specs, all 4 bottles are 20% - 25% filled (about a quarter of a bottle) to prevent messy air shipping spills. We have adjusted the price accordingly so you will have a little bit of glue, lock, grease & adhesive for a few bucks.
|
|
|
|
Price: $3.95 (Replacement HM-CB180Z-Z-01)
|
Price: $10.50 (Please limit your order to one 3-pack due to shortage.)
Save on 3 sets of these Main Blades which can be used on the CB180D/CB180Q/CB180Z helicopters.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Includes one pair of servo as pictured. Servo arms and balls may not fit on some models, please try to use your existing servo arms and balls.
|
|
|
|
Price: $26.95 Replaced by Turbo Ace 352 (HM-CB180Z-Z-24-94)
|
|
|
|
|
|
|
|
|
|
The Walkera WK-2402 Transmitter is compatible with all Walkera and Novus 4-Channel 2.4gHz helicopters.
|
Price: Sale $19.95 (Reg 39.95 at 50% off)
The Walkera WK-2403 is compatible with all Walkera and Novus 4 channel 2.4gHz helicopters.
|
Price: Sale $189.95 (Reg. $219.95)
Compatible to all the latest 3-Axis Walkera receivers such as RX2433, RX2435, RX2437S, RX2610S and Heli-Max Novus equivalents.... ETC.
|
|
Price: Replace by MGP-1250M-2S-25C-J
1200mAh 25C high capacity and high discharge rate 2-cell (7.4V) lipo battery custom sized to fit in the CB180Z, CB180D, CB180Q, V200D01, V200DQ01 & V200D02 battery cages. You can also use this battery on the UFLY, UFLYS, Esky Lama 3 & Lama 4 helicopters.
| |
|
|