wow hobbies header

Browse Categories

Browse by Manufacturer

Shopping Cart


	Your cart is empty.

Mailing Lists


	Email Address:

Account Login

Email Address:

Password:

You will be prompted to enter your password on the next page

Create an account
Forgot Password?

Walkera Hiko400 Parts

Displaying products 1 - 73 of 73 results	Show:	Sort:

MG Power Li-po Battery, 11.1V 2600mAh 25C Banana Connector for Walkera v450D01, V450D03, V400D02, FPV400, QR-X400 Helicopter Price: $39.95 Quantity:	Training Gear Set (Yellow): 4 Extended Legs, for T-Rex 450/Clones, Walkera CB180Z/D, V200D01/02/03, 1#A, UFLY/S, LAMA3, 4F200, and V450D01 Price: $10.75 Quantity: Includes 4 long durable carbon fiber legs & clips for training purpose to prevent tipping over on take offs and landings. Clips in perfectly on all T-Rex 450/clones & all newer Walkera 1#A, Uflys,180/200/400/450 Helicopter	Training Gear Set: 4 Extended Legs, for T-Rex 450/Clones, Walkera CB180Z/D, V200D01/02/03, UFLY/S, LAMA3, 4F200, V450D01 & for 5mm Diameter Skid Tub Price: $9.95 Quantity: Includes 4 long durable carbon fiber legs & clips for training purpose to prevent tipping over on take offs and landings. Clips in perfectly on all T-Rex 450/clones & all newer Walkera 180/200/400/450 5mm skid pipes. Helicopter in photo is not included.	Training Gear Set: 4 Extended Legs, for T-Rex 450/Clones, Walkera CB180Z/D, V200D01/02/03, UFLY/S, LAMA3, 4F200, V450D01 & for 5mm Diameter Skid Tubes Price: $9.95 Quantity: Includes 4 long durable carbon fiber legs & clips for training purpose to prevent tipping over on take offs and landings. Clips in perfectly on all T-Rex 450/clones & all newer Walkera 180/200/400/450 5mm skid pipes. Helicopter in photo is not included.
Turbo Ace Battery Meter: 16C Measures 1-6 Cell Lipo, Measures 2.8V-25.2V For All RC Helicopters Retail: $11.95 Price: $6.95 You Save: $5.00 (42 %) Quantity: You can effortlessly prolong battery life by frequently checking its voltage. Measuring 1-cell for Walkera/Novus and 3-6 cell for Trex450/600 helis, this one step plug & test meter is accurate and much easier to use than most cumbersome voltage meters.	Turbo Ace Lipo Battery Voltage Meter With Programmable Buzzer Alarm : Measures 1-6 Cell Lipo Batteries, 2.8V-25.2V, For All Helicopters Price: $9.95 Quantity: This is a battery meter with built-in low voltage alarm can also be installed on board helicopters. At low voltages, a led will light up and the double buzzers will also sound a warning for pilots who are too far from the helicopter to prevent crashes.	Walkera RX-2801-PRO Receiver With ID Bind, 2.4GHz, for TurboAce X720/X830-S, Gaui 330X-S, Walkera 180-450 Flybar Helis, TREX 250-700 Price: $49.95 Quantity: This RX2801PRO receiver features safe and reliable ID bind. To complete the ultimate solution for any 200-700 size heli application, all you need is the WK2801PRO TX and a good quality gyro (not included with this receiver only package.	XTM-EA-046: Tail Servo Mount (1 pair) For 12mm Diameter Booms Price: $12.90 Quantity:
XTM-EA-047: Rudder Push Rod Guide (1 pair) For 12mm Diameter Booms Price: $12.90 Quantity:	MG Power Transmitter Battery 2200mAh 3S Lipo: JST, For Walkera WK2401/2/3, WK2601/2/3, WK2801/Pro, Devo7,& 10 Price: $24.00 Quantity: It's time to retire those old "AA" batteries. This is the smartest new solution to charge up your Walkera transmitter radio. No more guess work on 8 "AA" batteries with iffy connections in a tray. Everything is consolidated into one simple reliable unit.	WWC-TE-Mini-Digital-Protractor: Bevel Box, Angle Sensor Price: $39.97 Quantity:	XTM-EA-036-WKR: Xtreme Neck Strap Stabilizer for Walkera Transmitters, Realigns transmitter to comfortable handling & viewing position Price: $9.90 Quantity: Customized to fit on Walkera transmitters, this Xtreme neck strap stabilizer bracket realigns the Tx to an optimum operating and viewing angle to ease arm, wrist & hand strain associated with holding and controlling the transmitter sticks simultaneously.
XTM-EA-040: Swashplated Leveler (5mm Hole) for T-rex 450, CopterX 450, Walkera V400D02, V450D01, 59DQ, and Hiko 400 Price: $11.90 Quantity:	ASC1596: Thread Locking Adhesive, Prevent Screws Coming Loose from Vibration, Blue Thread Lock for "Easy to See" Applicaton Price: $4.85 Quantity: It's a hard to find the right kind of Thread Locking Adhesive that works and dries quick. Worse yet, certain thread locks are hard to dry.	XTM-EA-038-G: Magnetic Blade Balancer, Golden Color (You need to buy a Blade Balancer Attachment that fits with your blade hole size. - Not Included) Price: $13.95 Quantity: Includes magnetic base, protective metal case only. This base requires a blade balancer attachment to be complete which is sold separately. Please make sure you get one that fit with the size of your blades.	XTM-EA-038-G+EA038-A-V2: Magnetic Blade Balancer (Gold Color) Including Attachment for Walkera 4G6/4#6/CB100/4#3B/4G3 & Other Micro Helicopters Price: $21.85 Includes 2 longer screws not available in older version Quantity: This complete set includes magnetic base, protective metal case and micro blade balancer attachment to balance main blades for micro and super micro helicopoter. Compatible for models from Walkera, E-flite, Align T-Rex 100, Novus, Nine Eagle and etc.
XTM-EA-038-S+EA038-A-V2: Magnetic Blade Balancer (Silver Color) Including Attachment for Walkera 4G6/4#6/CB100/4#3B/4G3 & Other Micro Helicopters Price: $21.85 Includes 2 longer screws not available in older version Quantity: This complete set includes magnetic base, protective metal case and micro blade balancer attachment to balance main blades for micro and super micro helicopoter. Compatible for models from Walkera, E-flite, Align T-Rex 100, Novus, Nine Eagle and etc.	Isolate It!: - Sorbothane Gyro / Camera Mount Vibration Isolation Bushing 30 Duro- Tall version Price: $7.95 Quantity: The softest Sorbothane Vibration Isolation Bushings available in grade 30 Duro softness instead of the standard 50 Duro. Most effective soft dampening system for the helicopter/quad gyro or camera mount vibration reduction application.	Isolate It!: Sorbothane Gyro / Camera mount Vibration Isolation Washer 30 Duro (.45" ID - 1" OD - .19" Deep) Price: $6.95 Quantity: The softest Sorbothane Vibration Isolation Washer available in grade 30 Duro softness instead of the standard 50 Duro. Most effective soft dampening system for the helicopter/quad gyro or camera mount vibration reduction application.	Walkera DEVO RX1002 10-Channel Receiver with Extra Long Range Antenna: 2.4GHz, Compatible with Walkera DEVO 6, 6S, 7, 8, 8S ,12 & 12S Transmitters Retail: $66.60 Price: $41.97 You Save: $24.63 (37 %) Quantity:
EFLH1405: 400-450 Size Helicopter Training Gear, for BSR/B400/B450, X830 & 400/450 Size Helicopters Price: $19.99 Quantity: This is a professional grade training gear with 4 sturdy foot-long legs which prevents tip-overs in take-off and landings. Features includes custom fitted clip-on mounting clips for 5mm diameter skids plus a center hub for easy installation and removal.	HM-60B-Z-35 (HM-CB180-Z-32, HM-UFLY-Z-34) 220V: Balancer Charger (Ga-005), 2-Cell & 3-Cell Operation (Not for USA, Canada & Japan) Price: $23.95 Quantity: This 220V wall balancer charger is suitable for Europe and other international applications. The plug will not fit with 110V applications in the USA, Canada and Japan.	HM-CB180-Z-32 (HM-UFLY-Z-34, HM-60B-Z-35) 110V: Balancer & Charger, 2-Cell & 3-Cell Operation, For USA, Canada, Mexico & Japan Price: $23.95 Quantity: Instead of this standard charger, we highly recommend that you get the CX450-50-01 Balancer Charger which is a premium quality charger that costs about the same and is very reliable and easy to use.	HM-F450-Z-48 (HM-HIKO400-Z-42): Lipo Battery (11.1V, 2200mAh), For Walkera V450D01, UFO-MX400 Price: $49.90 Quantity:
HM-HIKO400-Z-01: Main Rotor Blade Retail: $22.99 Price: $17.99 You Save: $5.00 (22 %) Quantity:	HM-HIKO400-Z-02: Flybar Paddle Retail: $3.45 Price: $2.79 You Save: $0.66 (19 %) Quantity:	HM-HIKO400-Z-03: Flybar Price: $3.95 Quantity:	HM-HIKO400-Z-04: Main Blade Holder Price: $15.95
HM-HIKO400-Z-05: Rotor Head Set Price: $21.95	HM-HIKO400-Z-06: Swashplate Price: $25.95 Quantity:	HM-HIKO400-Z-07: Ball Linkage Set Price: $8.95 Quantity:	HM-HIKO400-Z-08: Main Shaft Price: $3.75 Quantity:
HM-HIKO400-Z-09: Main Shaft Sleeve Price: $4.54	HM-HIKO400-Z-10: Main Blade Shaft Price: $3.75	HM-HIKO400-Z-11: Tail Shaft Set Price: $3.75 Quantity:	HM-HIKO400-Z-12: Tail Gear Box Set Price: $5.95 Quantity:
HM-HIKO400-Z-13: Tail Steering Set Price: $7.95 Quantity:	HM-HIKO400-Z-14: Tail Blade Rocker Price: $3.95 Quantity:	HM-HIKO400-Z-15: Tail Blade Holder Price: $4.95 Quantity:	HM-HIKO400-Z-16: Belt Puller Price: $1.95 Quantity:
HM-HIKO400-Z-17: Synchromesh Gear Price: $3.95 Quantity:	HM-HIKO400-Z-18: Main Gear Set Price: $14.75	HM-HIKO400-Z-19: Copper Ball Price: $2.95	HM-HIKO400-Z-20: Linkage Set Price: $3.45 Quantity:
HM-HIKO400-Z-21: Rudder Servo Rod Holder Price: $2.95	HM-HIKO400-Z-22: Tail Strut Price: $2.95	HM-HIKO400-Z-23: Fixing Connector Price: $2.95 Quantity:	HM-HIKO400-Z-24: Main Frame Strut Price: $3.95
HM-HIKO400-Z-25: Canopy Fixed Part Price: $2.95 Quantity:	HM-HIKO400-Z-26: Skid Landing Price: $5.75	HM-HIKO400-Z-27: Tail Boom Price: $3.75 Quantity:	HM-HIKO400-Z-28: Tail Rotor Blade Retail: $4.99 Price: $3.49 You Save: $1.50 (30 %) Quantity:
HM-HIKO400-Z-29: Main Frame Price: $7.75 Quantity:	HM-HIKO400-Z-30: Stabilizer Price: $3.50 Quantity:	HM-HIKO400-Z-31: Main Frame Holder Price: $3.75 Quantity:	HM-HIKO400-Z-32: Tail Boom Rod Holder Retail: $3.45 Price: $2.79 You Save: $0.66 (19 %) Quantity:
HM-HIKO400-Z-33: Servo Fixer Price: $3.45 Quantity:	HM-HIKO400-Z-34: Toothed Synchromesh Belt Price: $4.90 Quantity:	HM-HIKO400-Z-35: Canopy Price: $4.90 Quantity:	HM-HIKO400-Z-36: Bearing Set Price: $7.90
HM-HIKO400-Z-37: Screw Set Price: $7.95 Quantity:	HM-HIKO400-Z-39: Brushless Speed Controller Price: $39.90	HM-HIKO400-Z-40: Set of 3 Servos (WK-7.6-6 With Longer Wires Than HM-4F200-Z-39) Price: $32.95	HM-HIKO400-Z-41: Tail Servo (WK-0902H) Price: $12.95
HM-HIKO400-Z-42(HM-F450-Z-48): Battery (11.1V 2200mAh) for HIKO 400, V450D01 and UFO-MX400 Price: $49.90	HM-HIKO400-Z-44: Gyro (GO11) Price: $39.90	HM-HIKO400-Z-45: Receiver (RX-2801-PRO) Price: $49.95 Quantity:	HM-UFLY-Z-341-220V (HM-CB180-Z-32-220V, HM-60B-Z-35-220V): 220V Balancer & Charger, 2-Cell & 3-Cell Operation- 220 VOLT Price: $23.95 This is a 220V version- Not for USA customers Quantity: 220V version- Please becareful not to order this item if you are located in USA. This is a standard balance charger for 2-cell (7.4V) & 3-cell (11.1V) LiPo batteries which includes a balancer for the battery & a power supply that plugs into a 220V socket.
Walkera DEVO RX1202 12-Channel Receiver with Extra Long Range Antenna: 2.4GHz, Compatible with Walkera DEVO 6, 6S, 7, 8, 8S ,12 & 12S Transmitters Price: $64.95 Quantity:	Walkera DEVO RX601 6-Channel Receiver: 2.4GHz, Compatible with Walkera DEVO 6S, 7, 8S ,10S & 12S Transmitters Retail: $69.00 Price: $34.95 You Save: $34.05 (49 %)	Walkera DEVO RX802 8-Channel Receiver: 2.4GHz, Compatible with Walkera DEVO 6, 6S, 7, 8, 8S ,12 & 12S Transmitters Retail: $59.95 Price: $39.95 You Save: $20.00 (33 %) Quantity:	Walkera Transmitter Neck Strap Price: $7.95 Quantity: Radio transmitter hands free neck strap. Total length 45 inches.
Walkera WK-2801-PRO (Version 2.3) Transmitter: Programmable, 2.4GHz, 8-Channels, For Walkera & Novus Helicopters !!! Price: $159.95 Quantity: Compatible to all the latest 3 axis Walkera & Heli-Max Novus receivers such as RX2433, RX2435, RX2437S, RX2610S & Heli-Max Novus equivalents.

Walkera Hiko400 Parts