Dimensions and micro connector fits 4#3/A/B/Q, 4G3/6/S, 4#6/S/Bell, CB100, V120D##, Novus CX/FP/CP. This little dynamo will bring new and exciting energy to your high performance Walkera helis with brushless motors & Turbo Hot Rod upgrades.

At 9.1g, this ultra light premium linear current battery features consistent 20C high output without parabolic degradation towards the latter part of the flight cycle. Reduced inertia is extremely beneficial for extreme 3D and accelerated sport flying.

Premium linear current battery features consistent 20C high output without parabolic degradation towards the latter part of the flight cycle. The #1 choice for professionals, It feels like a freshly charged battery all the way to the end of the flight!

You can effortlessly prolong battery life by frequently checking its voltage. Measuring 1-cell for Walkera/Novus and 3-6 cell for Trex450/600 helis, this one step plug & test meter is accurate and much easier to use than most cumbersome voltage meters.

This is a battery meter with built-in low voltage alarm can also be installed on board helicopters. At low voltages, a led will light up and the double buzzers will also sound a warning for pilots who are too far from the helicopter to prevent crashes.

Due to air shipping specs, all 4 bottles are 20% - 25% filled (about a quarter of a bottle) to prevent messy air shipping spills. We have adjusted the price accordingly so you will have a little bit of glue, lock, grease & adhesive for a few bucks.

Customized to fit on Walkera transmitters, this Xtreme neck strap stabilizer bracket realigns the Tx to an optimum operating and viewing angle to ease arm, wrist & hand strain associated with holding and controlling the transmitter sticks simultaneously.

It's a hard to find the right kind of Thread Locking Adhesive that works and dries quick. Worse yet, certain thread locks are hard to dry.

Two of the same phillips screwdrivers for the micro Walkera helicopters size 000- Spindle handle, magnetic and hardened tip. Improved optimum tip angel for a better fit on micro screws. The choice Phillips #000 screwdriver for Wow Hobbies technicians.

HM-4#3B-Z-29: Charger for all Walkera & Novus 1-cell helicopters. Chargers features convenient "plug in the wall outlet" with operation that will automatically shut-off when the battery is fully charged and the LED indicator turns from red to green.

500mAh batteries weight little less than 600mAh batteries giving you a slighter lighter feel.

HM-4G6-Z-37600 Battery: (3.7v, 600mAh, 15C) fits perfectly in Walkera & Novus 1- cell helis & offers longer flight time than the stock 400-500mAh batteries. Please click on "More Info" to see the link for the ultimate "650mAh" high capacity battery.

HM-4G3-Z-30:* Battery(3.7v 400mAh) for Walkera 4G3 & Novus CP. Please see the upgraded version rated at 20C (instead of 12C) with longer flight time on sale for the same price per battery at http://wowhobbies.com/battery20cfor43-1.asp

HM-4#3B-Z-29: Charger for all Walkera & Novus 1-cell helicopters. Chargers features convenient "plug in the wall outlet" with operation that will automatically shut-off when the battery is fully charged and the LED indicator turns from red to green.

HM-LM2-1-Z-01: Walkera Main Blades for Lama2 and Lama2-1 can also be used on Novus CX. Sharp black and white contrast allows for increased visibility against either light or dark backgrounds.

Walkera HM-LM2-1-Z-02 pictured here is the same as the Helimax Novus CX Flybar Assembly and is 100% for Lama 2, Lama 2-1, Novus CX, 5G6 & 5G6-1. All Walkera and Helimax Novus Parts are made by Walkera

HM-LM2-1-Z-03: Blade Holder/Grip for Lama2-1, Lama2, Novus CX & 5G6 which are all made by Walkera.

This shaft is not compatible to the 5G6 helicopter and it is not for the CNC metal head Lama2-1 helicopter. It is for the Novus CX, Lama2 and Lama2-1 plastic head helicopters.

HM-LM2-1-Z-09 (HM-LM2-Z-09) aka T-shape Holder Lower Head Block/Blade Drive is 100% compatible with Lama 2-1, Lama2, Novus CX & 5G6(-1). Walkera made all these helis and they have in common many of the same parts.

HM-LM2-1-Z-10: This Canopy fits all three helicopter made by Walkera, the Lama2, Lama2-1 & Heli-Max Novus CX.

Walkera HM-LM2-1-Z-11 pictured here is equal to the Heli-Max Swashplate Assembly which is used on LAMA2, LAMA2-1 & HELIMAX NOVUS CX. All Novus CX Parts are made by Walkera.

HM-LM2-1-Z-17 : Complete Screw Set for LAMA2, LAMA2-1 & NOVUS CX Helicopters. All of these Helicopters & Parts are produced by Walkera including the Novus CX.

HM-LM2-1-Z-18 Tail Rotor Blade Holder for Lama2, Lama2-1 is the same as Rear Subframe for Novus CX which are all from Walkera's Factory. The Novus CX is a rebranded Walkera Lama2.

HM-LM2-1-Z-20: Main Drive Motor (Upper & Lower) Set of Two for Lama2, Lama2-1 & Heli-Max Novus CX Helicopters. All of these motors are originated and made by Walkera.

400mAh batteries weight less than 500mAh or 600mAh batteries giving you a slighter lighter feel. The battery is more square and flat which is more suited for proper CG (Center of Gravity) on Lama2, Lama2-1 & Novus CX.

This receiver contains 2 PCB & fits the Lama2 and Novus CX helicopters only-Will not fit the Lama2-1 helicopter. Please look at the photo very carefully and match it against the receiver on your helicopter. There is no return allowed on electronics item.

The Walkera WK-2402 Transmitter is compatible with all Walkera and Novus 4-Channel 2.4gHz helicopters.

Compatible to all the latest 3 axis Walkera & Heli-Max Novus receivers such as RX2433, RX2435, RX2437S, RX2610S & Heli-Max Novus equivalents.