The only dual case with variable form design that carries any 2 micro-helis + Tx + Misc. Turbo Ace case is meticulously crafted from high gauge aluminum and features a heavy duty handle for durability. Patent pending on flexible variable form design.

One Phillips screwdriver for the micro Walkera helicopters size 000- Spindle handle, magnetic and hardened tip. Improved optimum tip angel for a better fit on micro screws. The choice Phillips #000 screwdriver for Wow Hobbies technicians.

Set of 3 metal shims (super thin paper-weight washers)- Includes one 0.1mm , one 0.2mm and one 0.3mm thick shim with 6mm bore diameter. 2.9g motor and carbon stand/holder shown on photo are not included.

Premium linear current battery features consistent 20C high output without parabolic degradation towards the latter part of the flight cycle. The #1 choice for professionals, It feels like a freshly charged battery all the way to the end of the flight!

It's time to retire those old "AA" batteries. This is the smartest new solution to charge up your Walkera transmitter radio. No more guess work on 8 "AA" batteries with iffy connections in a tray. Everything is consolidated into one simple reliable unit.

The Turbo Ace Power House 31714 inrunner motor. This is a direct drop in plug and play motor for the 4G3. It generates an additional 400 RPM from stock motor running cool at 100% throttle. It is a taller engine at 25mm verses stock 22mm. Wt. only 13g

The all new Lethal-Power WOW-07 (formally named HP07-2) is here. It supersedes the 81220 in power and efficiency. It's custom to Wow Hobbies' specifications. Make sure that out-runner motor wires are soldered directly to ESC for consistent performance.

Dimensions and micro connector fits 4#3/A/B/Q, 4G3/6/S, 4#6/S/Bell, CB100, V120D##, Novus CX/FP/CP. This little dynamo will bring new and exciting energy to your high performance Walkera helis with brushless motors & Turbo Hot Rod upgrades.

Dimensions and micro connector fits 4#3/A/B/Q, 4G3/6/S, 4#6/S/Bell, CB100, V120D##, Novus CX/FP/CP. This little dynamo will bring new and exciting energy to your high performance Walkera helis with brushless motors & Turbo Hot Rod upgrades.

Turbo Ace Super Capacity 650-700mAh Battery, designed to fit the Walkera 4G3/6/S, 4#6/S/BELL, CB100 & the V120 Series, will extend your flight time. Higher 20C high output increases power for more extreme maneuvers in both sport flying and 3D flight.

Manufactured by the same Linear battery factory, the 650mAh is now available using the same process and technology as the 400mAh Linear battery. It provides the greatest CG adjustment (1.2 inch) ever possible for the 4G6/4#6/V120D02/ Novus 125.

Compatible with all Walkera and Novus 4 or 6 channel 2.4gHz helicopters

Includes Walkera battery and receiver plugs installed. This is the higher current brother of the common XP-7A Ebay ESC. It works with 1-3s applications and it's used mostly on the brushless main motor conversion to start outrunner brushless motor easier.

XP-12A-2 version 2 with improved firmware that gives outrunner 5-8% additional head speed (power boost). It wakes up the old HP08 and retains the same flight time. Includes Walkera battery, receiver and motor plugs installed. It is plug and play.

This is a special edition XP-7A-2 programmable ESC made to compatibility spec to both the outrunners/ inrunners w/Anti-cog outrunner firmware. Plug & play w/ Walkera connectors. It is ideal for upgrading to the lighter outrunner motors.

Due to air shipping specs, all 4 bottles are 20% - 25% filled (about a quarter of a bottle) to prevent messy air shipping spills. We have adjusted the price accordingly so you will have a little bit of glue, lock, grease & adhesive for a few bucks.

This pitch scale is a wider design that measures +15 to -15 degrees Instead of the typical +12 to -12 degrees. Contrasting orange scale & deep blue pointer with a larger finger friendly low increment knob makes it easy to see and make minute adjustments.

Version 2 now comes with locking pin for added security. Designed for optimum view angle, it eases arm, wrist or hand strain associated with holding and controlling the transmittion sticks at the same time.

Customized to fit on Walkera transmitters, this Xtreme neck strap stabilizer bracket realigns the Tx to an optimum operating and viewing angle to ease arm, wrist & hand strain associated with holding and controlling the transmitter sticks simultaneously.

Hot Rod Kit includes Turbo Ace 31714 & 2.9g BL motors, V-shaped tail holder, exclusive motor clamp, Walkera tail ESC, wire set, manual & no tail rotor. This custom kit provides exceptional 4G3 & Novus CP 3D performance and 4#3B & Novus FP wind tolerance.

Designed for Walkera M120D01, V120D02/03/05, 4G6/S, 4G3 & Heli-Max Novus 125 CP & Novus CP helicopters, these cutting edge Carbon Fiber Main Blades, the perfect compliment for any micro CP helicopter, offers excellent performance and durability.

3 sets of cutting edge Carbon Fiber Main Blades, designed for Walkera M120D01, V120D02/03/05, 4G6/S, 4G3 & Novus 125/CP helis, combine feather weight technology & carbon fiber strength to enhanced durability, ultra rigidity for extreme 3D performance.

Two of the same phillips screwdrivers for the micro Walkera helicopters size 000- Spindle handle, magnetic and hardened tip. Improved optimum tip angel for a better fit on micro screws. The choice Phillips #000 screwdriver for Wow Hobbies technicians.

This is the "glue-on-version". For the better and more secure "clip-on-version" look for the same item for $29.95. The current consensus is to convert Walkera brush and 2g brushless to the stronger 2.9g brushless tail motor with durable dual bearing.

The 2.9g Turbo Ace 29700 BL motor with exclusive motor clamp is cleverly secured & removable from the Carbon C-Holder. This state of the art kit provides the 4G3 with stunning 3D performance over stocked 2g Walkera motor. Tail rotor is not included.

Stock brush tail motors have limited power due to lower thrust & RPM and stock 2g brushless has no bearing which wears out easily. This is the only secured "Clip-On" (Not the "Glue-On") 2.9g double bearing version used to upgrade Walkera's tail motors.

HM-4G3-35+36+37+38: Buyer beware, there is a knock-off 4G3 head set for $19.95 with missing metal head block. Genuine Walkera Metal Head Set includes blade grips, head block, swash & bell mixer. 4G6's longer shaft (HM-4G6-Z-10) is not included.

HM-4G6-Z-09+4G3-Z-35+36+37: This genuine Walkera Metal Head Set includes new stronger blade grips, head block, swash & original 4G6/S aluminum bell mixer. 4G6's longer shaft (HM-4G6-Z-10) is not included.

HM-4#3B-Z-29: Charger for all Walkera & Novus 1-cell helicopters. Chargers features convenient "plug in the wall outlet" with operation that will automatically shut-off when the battery is fully charged and the LED indicator turns from red to green.

HM-4#3B-Z-33. This is the standard Walkera Brushless Motor with 12T pinion for 4#3A/B/Q, CB100, V100D01, 4G3, Novus FP/CP. Before you buy this motor, check out the rugged Turbo Ace 91416 (under the same category) which is lighter and a lot more powerful.

HM-4G6-Z-37600 Battery: (3.7v, 600mAh, 15C) fits perfectly in Walkera & Novus 1- cell helis & offers longer flight time than the stock 400-500mAh batteries. Please click on "More Info" to see the link for the ultimate "650mAh" high capacity battery.

HM-4G3-Z-01: Official Main Rotor Blades are integrated from high density foam & urethane film for 4G3, V120D02/03, M120D01, 4G6/S & Novus CP/125 CP to optimize weight & stiffness. These blades can be easily balanced to offers unparalleled 3D performance.

HM-4G3-Z-02: The Flybar is made of torque-resistant steel, a critical element of the main rotor mechanism. The Walkera 4G3, 4G6, 4G6S & the Novus CP, 125 CP helicopters share the same parts & components which are all made by Walkera.

HM-4G3-Z-03: High impact plastic Main Blades Holder/Grip Set stay true to form & function to keep main blades properly aligned even at extremely high rotations. The intended flexibility prevents damage or skewing of the rotational plain.

HM-4G3-Z-08: Swashplate Mechanism in a black plastic version for Walkera 4G3 & Heli-Max Novus CP is highly resilient to stress and retains excellent true alignment. There is also an upgraded Red Alum CNC Metal Version Available for this part.

HM-4G3-Z-09 is the 4G3, 4G6 & 4G6S Guide Ball which is the same as Novus CP & Novus 125 CP Flybar Pivot Assembly. They are the same exact part made by Walkera just with different stock numbers. This is a high quality 3 peice set made of stainless steel

HM-4G3-Z-10: This Rotor Head Block Assembly Set is made of high density PVC with matching screw cap and is fully compatible with 4G3 & Novus CP. There is an original Walkera CNC Metal Version which is an upgrade from this plastic version.

HM-4G3-Z-11: Walkera 4G3 & Helimax Novus CP helicopters uses the same main shaft. A useful tip in checking your old main shaft for damage is to roll it on a flat surface and see if the shaft is wably.

HM-4G3-Z-16: When installing the Main Gear for 4G3 & Novus CP you want to make sure the elevation and teeth depth is in aligned with the pinions on the main motor so that the gears mesh properly for even and smooth operation.

HM-4G3-Z-17: The Battery Frame Mount for 4G3 & Novus CP is designed to accommodate standard sized 1s battery packs but also allows for minor variations including high output and high capacity 10C-20C & 400-500mAh configurations.

HM-4G3-Z-18: This Tail Boom for 4G3 & Novus CP is made of carbon fiber to reduce weight while providing a rigid tail structure that won't slip due to it's square profile. This cool but simple improvement elliminates all tail alignment issues.

HM-4G3-Z-19: These feather weight Skid Landing for 4G3 & Novus CP protect your helicopters and thus takes the most abuse during crashes. So it is a good idea to stock extra skids in addition to blades & batteries with your helicopter purchase.

HM-4G3-Z-24 : Tail Motor Wire for 4G3, 4#3A, 4#3B, Novus CP & FP. Custom lenght wire plus connector assembled for your convenience.

HM-4G3-Z-25: Tail Rotor Blade for Walkera 4G3 & Helimax Novus is a commonly used spare part due to crashes that damages tail section.

HM-4G3-Z-26: Screw Set for 4G3 & Novus CP

HM-4G3-Z-27: Complete Ball Bearing Set for 4G3 & Helimax Novus CP Helicopters

HM-4G3-Z-32 (HMXE2024)* 3G Cyclic Servos is a newer version of servos: Please make sure model# located outside the servo casing near the servo arm says WK-02-1 (newer servos). Older 2008 servos with different model# match older 2008 main frames.

HM-4G3-Z-35: Aluminum CNC Metal Main Blades Holders/Grips for 4G3, 4G6, 4G6S & Novus CP, Novus 125 CP. Please also see the fully assembled Complete CNC Metal Head Set under HM-4G3-Z-35-36-37-38.

HM-4G3-Z-36: Genuine Walkera CNC Metal Rotor Head Block Set for 4G3, 4G6, 4G6S, Novus CP & Novus 125 CP. Please also check out the Complete CNC Metal Head Set under HM-4G3-Z-35-36-37-38.

The long awaited virtually indestructible CNC Metal Rotor Head Block for the 4G6, 4G6S, 4G3, Novus 125 and Novus CP is finally here. No more pain with the contant replacement and balancing of the stock CNC rotor head.

HM-4G3-Z-40 (HM-4#6-Z-33) (HMXM3005)* Main Brushless Electronic Speed Controller for 4G3 & Novus CP is the same as HM-4#3B-Z-34 for 4#3B/A. This ESC is used only with a brushless main motor. For brushless tail motor please use a tail ESC (HM-4G3-Z-43).

This is the newest version of the Walkera brushless receiver RX2605A which outputs brushless signals for the 4G3 and the Novus CP. To get the brushless upgrade you will also need the Main Brushless Motor & Main ESC.

HM-V120D03-Z-10 BL 2g Tail Motor with shaft keyed with flat area to lock V120D03/4G3 tail rotor. Ready to turn your 4G3 into a hot rod at 100% more lift? Click on "More Info" for additional 2.9g option and Turbo Ace Main Brushless Motor upgrade.

HM-4G6-Z-01-Black X 5: Save on 5 pairs of high quality and feather weight main blades that are perfect for 3D flights. These cool blades minimize damages to 4G6/S, 4G3, V120D02/03, M120D01 & Novus CP/125 CP main rotor mechanism during crashes.

HM-4G6-Z-02 (HM-4G3-Z-02): The Flybar is made of torque-resistant steel, a critical element of the main rotor mechanism. The Walkera 4G6, 4G3 & the Heli-Max Novus CP helicopters share many of the same parts & components which are all made by Walkera.

HM-4G6-Z-03 (HM-4G3-Z-04): The Walkera made the Flybar Steering Ball also know as the Heli-Max Flybar Bell Mixer Ball Carrier for the 4G6S, 4G6, 4G3 & Novus CP, Novus 125 CP.

HM-4G6-Z-04 (HM-4G3-Z-07): Flybar Paddles for 4G6S, 4G6, 4G3 & Novus CP, Novus 125 CP are made of impact resistant pvc with screw receiptable for angle adjustments. Before each flight, make sure your paddles are properly aligned for maxium stability.

Same as HM-4G3-Z-38 except in chrome finish intead of red. The Ball Linkage/Mixer arms that come with the HM-4G3-Z-38 is not included in the 4G6-Z-09 package.

HM-4G6-Z-33 (HMXE2024)* Set of 3 Cyclic 3G Servos: Please make sure model# located outside the servo casing near the servo arm says WK-02-1 (newer servos).

HM-4G6-Z-33B (HMXE2024)* Genuine Walkera new cyclic servo with 45mm wire. Please make sure model# located outside the servo casing near the servo arm says WK-02-1 (newer servos). Older 2008 servos with different model# match older 2008 main frames.

HM-4G6-Z-33C (HMXE2024)* Genuine Walkera new cyclic servo with 85mm wire. Please make sure model# located outside the servo casing near the servo arm says WK-02-1 (newer servos). Older 2008 servos with different model# match older 2008 main frames.

HM-CB100-Z-26-3PLUGS Brushless Main Electronic Speed Controller (ESC) is used only with a brushless main motor. For brushless tail motor please use a Brushless Tail ESC (HM-CB100-Z-27).

HM-CB100-Z-26 Main ESC (Electroic Speed Controller) is used in conjunction with a brushless main motor. For brushless tail motor please use the Tail ESC (HM-CB100-Z-27).

HM-CB100-Z-27 (HM-4#3B-Z-38, HM-4G3-Z-43) Walkera Tail ESC/Converter: This Electronic Speed Controller also makes quick brushless tail signal conversions that is not provided by the brushless RX2406A/B or RX2400BL receivers with only BL main signals.

HM-V120D03-Z-09 Walkera BL Main Motor, WK-WS-12-003, 12T. If you are upgrading the 4G3, 4#6/S/BELL, V120D01/03, Novus CP/FP/125 FP please also consider the far superior & lighter Turbo Ace 71316 with rave reviews on its extraordinary power.

HM-V120D03-Z-10 BL 2g Tail Motor with shaft keyed with flat area to lock V120D03/4G3 tail rotor. Ready to turn your V120D03 to a hot rod at 100% more lift? Click on "More Info" for additional 2.9g option and Turbo Ace Main Brushless Motor upgrade.

This is the best head set you can ever put on your 4G6S, 4G6, 4G3 & Heli-Max Novus 125 CP, Novus CP. The stay-true head is made of extremely hard aerospace material & is virtually indestructible.

Center hole of this 16T pinion fits the 1.5mm shaft of the Walkera BL main motor, Feigao 12mmx20mm main motor, Losi 10,250kv or any motor with 1.5mm shaft. The pitch of this pinion matches the Walkera 4#3A, 4#3B, 4#3Q, 4G3, Novus FP & CP Main Gear.

Center hole of this 18T pinion fits the 1.5mm shaft of the Walkera BL main motor, Feigao 12mmx20mm main motor, Losi 10,250kv or any motor with 1.5mm shaft. The pitch of this pinion matches the Walkera 4#3A, 4#3B, 4#3Q, 4G3, Novus FP & CP Main Gear.

Fits all 4mm applications and the Walkera 4G3, 4G6, 4G6S, 4#6, 4#6Bell, 4F200, 4F180, V120D01, V120D02, CB180, CB180Z, UFLYS, V200D01, V200D02, Novus 125 CP, Novus 125 FP and Novus CP main blade holding nut.