Gaui 500X-S Quadcopt Super Combo(G-222003), Gyro (GU-344), 4 Scorpion Motors, 4ESCs, CarryingBag & ProtectionFrame, 3Axis Al V2 CamMount, BlueWht, 3Se
Price: $848.95.00 (Free Shipping)
Out of stock
Part Number: G-222003+ALA3CMV2+AL500LBW+3xMG-D-9G * %003%
Manufacturer Part No: G-222003
- Flight Efficiency: With a standard battery (2S 2000mAh) flight time is more than 12min, with a high-capacity battery, the flight time will be 20 min or more (available spreadsheet calculation)
- Excellent wind resistance: the efficiency and load of propeller are perfectly optimized, so the wind resistance will be better than general electric aircraft
- High stability: When using GU-344 (three-axis stabilizing system) for the beginner or professional in combination with other electronics for FPV flying; making the GAUI Quad Flyer a very stable vehicle.
- Additional payload capabilities: Maximum Flying Weight is between 1100g to 2200g depending on power system used (330X GAUI Motors/ESCs or 500X GAUI Motors/ESCs) so you can install cameras and video recorder, and other system.
- Operation mode and flight characteristics are similar to helicopters but without complex transmission of power by gears.
Collapsible body design greatly reduces the possibility of damage.
Although it's controls includes state-of-the-art electronics and motor the mechanism is relatively simple to maintain & repair. easier.
10 inch propellers are used with standard 500X and 500X-S motors/ESCs.
- Crossing Distance: 500mm motor shaft to motor shaft
- Propeller Size: Four 10 inch propellers (included in this package)
- Motors: Four Scorpion 960KV brushless Motors (included in this package)
- ESCs: Four 18A ESC (included in this package)
- Carrying Bag (included in this package)
- Protection Frame (included in this package)
- Weight: 670g (with recommended standard power package, without battery)
- Maximum Flying Weight: 2200g (including battery & payload)
- Battery: 7.4V to 14.8V (2S to 4S LiPo) (not included)
- Flying Duration: 7 ~ 20 minutes (depends on battery capacity, payload and flying style)
The Alware Advanced 3-axises V2 Camera Mount accepts cameras up to the size of the 108*105mm(Wide*High).
- With New, Simple and Hight Precision designed
- Made of flash, light and strong fiber glass plates as well as CNC Aluminum Rods and high quality Flange Bearings- 3 controllable axises (Can also be simplify to 2-axises mode) by standard small size servos with multiple high quality Flange bearings on each joins.
- High precision of each axises
- Use bottom plate assemble method to the GAUI 330X 500X as to increase the stability of the aircraft in the sky due to lower CG position.
- Relatively large room to mount batteries and varies cameras.
- Easy to assemble.
- Detailed instruction manual can be downloaded easily.
- Axis: 3 Axis Camera mount(Pan, Tilt, Roll) or Simplify to become a light and simple 2-axises version(Pan and Tilt)
- Mounting: Bottom plate assemble method to the GAUI 330X/ 500X
- Material: Flash, light and strong fiber glass plates; CNC Aluminum Rods; Hight quality Flange Bearings and Screws set.
- Bearing type: Flange bearings
- Camera Mount Weight: 191g (with servos);
- Spider Elastic Landing Gear: 143g
- Landing Gear Height: 170mm
- Dimension of portable camera in 3-axises assembly mode: Max. ~108x105mm (HxL)
- Dimension of portable camera of 2-axises assembly mode: Max. ~65x106mm (HxL)
- Payload Capacity: ~500g
- Battery Room (Max height): 40mm
- Operate Servo size: Standard small servos such as Alware MD260, Align DS410, SAVO SH-0261 etc.
- Color: Black fiber plates; Clean Anodized Silver Aluminum Rods.
- Landing Gear: New Alware Spider Elastic Landing Gear (suitable for both GAUI 330X/ 500x), wider viewpoint.
- Gyro Stabilization for Camera Mount: Recommended with FY-20A 3-axises Stabilizer/ DJI WooKong M/ GAUI GU-INS GPS build-in Gimbal Function.
- 1x Alware Advanced 3-axises V2 Camera Mount
- 1x new Alware Spider Elastic Landing Gear Set
- 1x Complete Screw Set
- 3x Servo Linkage Rods with Ball Links
- Metal mounting rod and connectors
ALware MD260 Metal Digital Servo is a wide angle mini servo which is perfect for small FPV/ Cam Mounts aerial filming applications. It's maximum angle can be set up to 260 degrees with the max. endpoint set on the transmitter.
- 260° rotating servo, specially designed for FPV pan & tilt control.
- Idea for FPV/ Cam Mounts e.g. Alware 3-Axises 450/500X Pro Camera Mount, Alware Advanced 3-axises FB V2 Camera Mount etc.
- Operating voltage range： 4.5V—6.0V
- Operating temperature range： -20℃ to 60℃
- Operating speed： 0.10 sec/60℃ 6V 0.12 sec/60℃ 4.8V
- Torque： 2.0kg.cm 6V/ 1.8kg.cm 4.8V
- Block up to turn electric current: 600mA
- Dead band width： ≤4usec
- Size： 22.5×11.5×24.6mm
- Weight： 12g
- Bearing material： Metal
- Gear material： metal and plastic gears
- 1x ALware MD260 Metal Digital Servo for FPV Cam Mount
- 4x servo horns
ALware Super Lighting Boom 4 pcs (For GAUI 500X)(Blue White) Features:
- Used for GAUI 500X QuadFlyer.
- Made of thick, transparent and durable plastic turbing with PVB sheet inserted inside.
- 6 pieces of super light, glaring and colorful LEDs(12V) in two side, total with 12 LEDs.
- Same size as GAUI 500X Boom, easy to install.
- JST connector is soldered of each tubing.
- 4in1 JST to 3S Lipo Banlacer Connector is included.
- Motor connectors are needed to extend before installing the tubings.