The 6-channel DX6i uses the same full-range DSMX™ technology found in the Spektrum DX8 and includes an impressive list of programming features for both airplanes & helicopters. Includes the AR6210 6-Channel Full Range Receiver + 4 Batteries + AC Adapter.

Customize your Spektrum DX transmitter with these new colored rollers!

The BLADE 450 3D RTF is a ready to fly package and all you do is simply charge up the enclosed 2200mAh 3S 30C LiPo Battery. This is an extremely well balance brushless helicopter with a belt driven variable pitch tail for ultra performance and durability.

You can effortlessly prolong battery life by frequently checking its voltage. Measuring 1-cell for Walkera/Novus and 3-6 cell for Trex450/600 helis, this one step plug & test meter is accurate and much easier to use than most cumbersome voltage meters.

These buckles are designed with left hand thread at the marked end and right hand thread on the unmarked end so you can make adjustments without snapping off the linkages.

It's a hard to find the right kind of Thread Locking Adhesive that works and dries quick. Worse yet, certain thread locks are hard to dry.

The 2200mAh 3S 11.1V 50C Li-Po is a high performance battery option for 480-class park flier airplanes and also 450-class helicopters. The E-flite 50C Li-Po batteries provide the extra punch needed for the most demanding 3D maneuvers

DX18 is a true milestone for RC pilots who operate models with a lot of functions or a lot of servos. It’s the RC world’s first hand-held transmitter with 18 fully-proportional channels. Until the DX18, the highest number of hand-held TX was 16.

The X-Plus 8 module is designed to allow expansion of up to 8 servos for non-control surface functions such as bomb drops, lights, winches, retractable landing gear, and many more

The TM1000 Telemetry Module transmits important flight information to aircraft telemetry compatible transmitters. The module can provide important Flight Log information such as RF link performance and receiver battery pack voltage.

EC3 Device Connectors are the ideal power connector for devices such as speed controls, battery chargers, and power meters and connect to the EC3 Battery Connector used on power output leads on batteries.

This is a standard balance charger for 2-cell (7.4V) & 3-cell (11.1V) LiPo batteries which includes a balancer for the battery & a power supply that plugs into a standard 110V wall socket.

Besides advanced DSM2/DSMX technology and an impressive list of programming features, DX7s boasts the finest ergonomics in its class. Its balanced weight, silky smooth quad-bearing gimbals and rubber grips provide a sense of comfort and precision.