Package includes Devo 10 New Generation 10 channel radio with gun metal finish (not the black version without finish) + bonus RX1002 receiver.
New Generation DEVO 10 Transmitter
Representing a new generation of transmitters, Walkera's DEVO 6S/7/8S/10/12S transmitters represent a significant improvement over traditional 2.4GHz radios. Employing cutting edge technology, you will notice significantly faster response, smoother stick movement and signal reliability. At about 30% the cost of similar high-end radios, the DEVO 10 is particularly a breakthrough in value. With extensive field testing by master class pilots, the DEVO has many advantages. It features telemetry to monitor voltage/temperature on board the aircraft and a vibration alarm which can be set to trigger on user defined time, voltage and temperature. It includes many of the features not seen on transmitters which cost over $500, such as smooth servo travel control dials and 7-point curve adjustments.
Protect your RC helicopter/airplane investment and put an end to constant worrying about running low on battery.airplane investment. This transmitter is set up to wirelessly receive updated telemetry voltage data from the aircraft. You can set the DEVO 10 to trigger a sustained vibration alarm once the battery has dropped below your pre-defined voltage. You will no longer lost track of the battery power or forget to land. Since the battery voltage can be clearly displayed on the transmitter LCD, you no longer need to check a battery with a meter before flight.
Devo 10 Telemetry introduction videohttp://www.youtube.com/watch?v=RTWxrQof6HQ
This Devo 10 is in premium upgraded anodized gun metal black version (not stock flat black version).
The Devo 10 radio comes with a high resolution LCD to display graphs like the WK2801-PRO. The backlit LCD screen is clearly visible under sunlight. The new generation features that replaces the traditional 2.4gHz radio are as follow:
Telemetry which displays voltage, temperature, RPM and GPS info from aircraft
7 point high resolution curve adjustments instead of the traditional 5 point
Easy to read extra large text
Vibration and/or buzz alarm set to trigger base on user defined time, voltage or temperature.
10 channels, including 2 channels with smooth servo travel control dials
Upgradable firmware online
30 model memory
There are 4 versions of this radio
$165.95 for basic black plastic version (bare black plastic, no finish) Includes RX1002 receiver
$169.95 for silver finish version (looks exactly like the Walkera WK2801-Pro) Includes RX1002 receiver
$169.95 for the gun metal finish premium version (same anodized anti-glare finish as the Devo 8S) Includes RX1002 receiver
$159.95 No receiver in this package in gun metal finish premium version (same anodized anti-glare finish as the Devo 8s)
This package contains the premium gun metal finish version, it has the elegant look and does not reflect the glare from the sun like the silver finish version.
For optional upgrade rechargeable Lipo battery for this transmitter go to
In order for telemetry data to be received and displayed on your DEVO 6S/8S/10/12S you will need a helicopter of airplane that has the ability to sense and transmit the telemetry data. Usually, you will need to purchase and install the optional telemetry module (see link below) on your helicopter or airplane to enable these functions. If you are using the DEVO transmitter with any helicopter or airplane (Walkera or otherwise) you will first need to use a DEVO compatible receiver on board. The Walkera Mini CP and Ladybird already have telemetry built-in so it does not need a telemetry module. In most other helicopters/airplanes you will need to install an optional telemetry module (see link below). Telemetry module below is required for helicopter such as Align T-rex 450 integrated with DEVO receivers. Walkera Mini CP and Ladybird already come with telemetry, therefore it is not required. Telemetry module together with Devo RX801, RX802 or RX1002 receiver, can be installed on any brand of helicopter/airplane to work with Devo 6s, 8s, 10 and 12s transmitters. You can upgrade all your helicopters to telemetry including T-Rex 250, 450, 600, Walkera 1#A, Hiko, E-Flite Blades and helicopters larger than 180 size which can carry this module. Take advantage of the newest in RC technology, the optional telemetry module can be purchased below.
1). Encoder: ARM micro computer system
2). Frequency: 2.4Ghz（DSSS）
3). Output Power: -5dBm~20dBm, long range 100mW power
4). Battery: 1.2VX4 NiCard or1.5V X 8 AA dry batteries
1). Backlit LCD screen is easy to see under the sunlight.
2). Upgraded gun metal anodized plating. Same plate coating used on the Walkera Devo 8S. This is not the stock version.
3). Displays telemetry data on the LCD screen including voltage, temperature, rpm and GPS data when the heli/plane has the ability to transmit telemetry data.
4). Vibration and/or buzz alarm which can be set to trigger on a user defined voltage, temperature and time.
5). 2 Model Types: Helicopter and Airplane. Improved programming with more mixes and better interface.
6). 7-point throttle curve provides more resolution than the traditional 5-point curve.
7). 30 model memory.
8). Online Update Function: Get latest model updates online and copy model setup data with ease.
9). Access user friendly menu with throttle curve graph.