| | |
|
| |
| | |
|
|
Brushless Motors
Brushless Motors for Micro & Mini RC Helicopters, Air Planes & Cars
Price: $88.95 Limited Quatities Available Now
The #1 selling Eflite Blade CX2 & CX3 & Esky Lama V3 & V4 Turbo Ace Brushless Conversion Kit with exceptional performance to boost power & flight time by 15-20%. Light Weight & Dual Bearing Outrunner BL Motors offers superb flight agility and durability.
|
Price: Was $38.95 now on sale $34.95
Includes 4 items. This kit is for 4G3, Novus CP only. It is not for 4#3B which needs a low tail fin, arriving early next week. Order other parts at no additional shipping charge. Consider purchasing the upgraded 2.9g BL motor w/ more power, 2 bearings.
|
|
Hot Rod Kit HP05 with 16T pinion BL motors, feather weight tail holder, exclusive motor clamp, Walkera tail ESC, wire set, manual & no tail rotor. This custom kit provides exceptional performance for CB100, 4#3B & Novus FP and it's wind tolerant
|
Plug and play brushless kit guaranteed to startup. CO5 with pinion and motor connector installed, paired and tested with Walkera 4G3 ESC for best timing.
|
|
|
|
|
|
|
|
Price: Replaced by Turbo Ace 915-14: Click on "More Info"
This is a version 2 of the model TA215 with strict Wow Hobbies quality assurance.The new 915 motor exceeded all our expectations and it is an even more potent upgrade than the coveted Turbo Ace 81220. Unlike other outrunners the 915 requires no soldering.
|
|
|
|
Hot Rod Kit HP06 with 16T pinion BL motors, feather weight tail holder, exclusive motor clamp, Walkera tail ESC, wire set, manual & no tail rotor. This custom kit provides exceptional performance for 4#3B & Novus FP and it's wind tolerant
|
|
|
|
The Turbo Ace Power House 31714 inrunner motor. This is a direct drop in plug and play motor for the 4G3. It generates an additional 400 RPM from stock motor running cool at 100% throttle. It is a taller engine at 25mm verses stock 22mm. Wt. only 13g
|
Pump up your Walkera Ufly with the Turbo Ace 354 Brushless Outrunner. You will feel a marked difference when copping with unpridictable outdoor elements.
|
At 4200kv, the Turbo Ace 3-cell 342 is an exceptional upgrade for the Walkera Ufly. Featuring extra durability & control, this complete 11.1V outrunner brushless motor integration will tolerate most voltage drops associated with high torque situations
|
|
|
|
The all new Lethal-Power WOW-07 (formally named HP07-2) is here. It supersedes the 81220 in power and efficiency. It's custom to Wow Hobbies' specifications. Make sure that out-runner motor wires are soldered directly to ESC for consistent performance.
|
Price: The 81220 has been replaced by the Turbo Ace 71318
Not all HP08 are created equal ! The Thermo-Cool light weight HP08-2 is a version of the HP-08 but custom to Wow Hobbies' specifications: Note that high performance motor wires must be soldered directly to ESC for best performance.
|
This replacement motor is for Eflite CX2, CX3, Esky Lama 3 or Lama 4 brushless upgrade system. It can not be used as a stock brush motor replacement.
|
|
Price: Turbo Ace 81016 Brushless Motor has been discontinued and it has been replaced by the more powerful 91416
Turbo Ace 81016 Brushless Motor has been discontinued and it has been replaced by the more powerful 91416.
|
|
|
|
|
|
|
2.3mm shaft size.
Includes pinion locking grub screw for easy pinion mounting.
|
|
Convert Walkera 4#3B or the Novus FP to a super light and powerful brushless 4.5g main motor. This kit uses a programmable Ebay ESC/converter with your existing RX2406. It's pretty much plug and play with only one solder joint needed on the RX.
|
The least expensive way to convert Walkera 4#3B & 4G3 to brushless. It uses your exiting RX2406/RX2605/RX2400 receiver to convert to brushless main. It's a plug and play. It is also programmable Ebay ESC w/converter.
|
The least expensive way to convert Novus FP, Walkera 4#3B & 4G3 to brushless. It uses your exiting RX2400/RX2406/RX2605 receiver to convert to brushless main. No soldering is required. CE701is a converter with a programmable Ebay ESC. Rx is not included.
|
|
|
|
Weighing in at a mere 2.5g, this is the lightest dual-bearing brushless tail motor that you can glue-mount to the C-shaped carbon tail stand (not included). The stock brushless 2g motor has no bearings & will ware out prematurely.
|
|
|
Hot Rod Kit includes Turbo Ace 91416 & 2.9g BL motors, C-shaped tail holder, exclusive motor clamp, Walkera tail ESC, wire set, manual & no tail rotor. This custom kit provides exceptional CB100/4#3B/Novus FP performance and wind tolerance.
|
|
|
This is the "glue-on-version". For the better and more secure "clip-on-version" look for the same item for $29.95. The current consensus is to convert Walkera brush and 2g brushless to the stronger 2.9g brushless tail motor with durable dual bearing.
|
|
|
|
|
|
Price: Was $38.95 now on sale $34.95
Includes 4 items. This kit is in stock for 4#3B/A only. It's not for 4G3 which needs a high tail fin. Remember to order other parts at no additional shipping charge. Ready to turn your 4#3B to hot rod? Click on MORE INFO above for addional BL main upgrade
|
|
|
|
The Turbo Ace 61316 (HP06) has been replaced by the 51416 BL Outrunner. The 51416's lighter design is more suited for micros and the updated speed eliminate the need to trim blades. So please look for listings that includes the 51416 instead of the 61316.
|
|
|
The new E-flite 440H brushless helicopter motor is a terrific upgrade for the Blade® 400 or any other 400- or 450-size heli. The 440H helps provide better headspeed and quicker collective and cyclic response.
|
|
|
|
|
|
|
|
|
HM-V120D03-Z-10 BL 2g Tail Motor with shaft keyed with flat area to lock V120D03/4G3 tail rotor. Ready to turn your 4G3 into a hot rod at 100% more lift? Click on "More Info" for additional 2.9g option and Turbo Ace Main Brushless Motor upgrade.
|
|
|
|
|
|
|
This super upgrade Turbo Ace motor that adds 35% to 50% to your stock brushless CB180Z & makes it extremely fast to fly outdoor. It is plug-n-play and uses your stock motor screws. Pinion and connectors installed for the CB180Z,CB180Z-pro,Hybrid, V120D01.
|
|
|
|
|
|
At 4,200kv, the Turbo Ace 3-cell 342 is an exceptional upgrade for the Walkera 1#A, Ufly. Featuring extra durability & control, this complete 11.1V outrunner brushless motor integration will tolerate most voltage drops associated with overload.
|
|
|
|
|
|
|
|
This is a high speed brushless converter with TheSteve chip build-into the PCB for easy Plug-N-Play. It is extremely easy to install and can convert any brush receiver signal to brushless and it will work and plug into most brushless ESC.
|
Price: This item is replaced by WWS-THESTEVE-HIGH
This is a low speed brushless converter with genuine TheSteve chip build-into the PCB for easy Plug-N-Play. It is extremely easy to install and can convert any brush receiver signal to brushless and it will work and plug into most brushless ESC.
|
|
Screws sold separately. Compatible to the Walkera HM-4#3B-Z-34 ESC (Electronic Speed Controller). Mounting hole spacing is 8.7mm center to center and is compatible to the 4#3B main frame.
|
|
|
Screws- set of 2 for the 4.5g TURBO ACE 411500 brushless motor
|
16 teeth. Center hole of the pinion fits the 1.5mm shaft of the Turbo Ace 81016 and 91416 BL motors. The pitch of this pinion matches the Walkera 4#3A, 4#3B, 4#3Q and 4G3 main gear. This pinion hole is too large for the Feigao or Walkera BL motor.
|
|
Pinion is included and installed, screws are available separately. See More Info for details. This motor has been tested on the 4#3b with the Feigao 6A ESC modified to 1 cell and the Flea with excellent result (Flea is available separately in this store).
|
Screws & Connector are included. Matching pinion is available at http://wowhobbies.com/11tpinion64pitch-1.aspx
This motor must be powered by ESC with a minimum of 6.5A otherwise ESC can be damaged. Go to http://wowhobbies.com/sale1299xp-7aebayblesc-1.asp
|
Price: $42.95 (Replaced by the Turbo Ace 71318)
As of June 15, 2010, the Turbo Ace 81220 (HP08-2) has been replaced by the updated and lighter weight Turbo Ace 71318 (HP07-2, Wow-07 Version) with higher KV (good for the RX2609 and excellent for the RX2610S on the 4G6S). Please get the 71318 instead!
|
Pinions are available separately, see More Info for detail. Includes the 3-pin Walkera motor connector installed.
| | |
Brushless Motors
|
|