Price: $88.95 Limited Quatities Available Now
The #1 selling Eflite Blade CX2 & CX3 & Esky Lama V3 & V4 Turbo Ace Brushless Conversion Kit with exceptional performance to boost power & flight time by 15-20%. Light Weight & Dual Bearing Outrunner BL Motors offers superb flight agility and durability.
|
No Soldering is required for your entire brushless conversion. The MCP X brushless main conversion kit with matching upgrade brush tail assembly & Microheli aluminum/carbon fiber frame. Includes everything you need to convert your MCP X to brushless main.
|
|
No Soldering is required for your entire brushless conversion. The MCP X brushless main conversion kit with matching upgrade brush tail assembly & Microheli aluminum/carbon fiber frame. Includes everything you need to convert your MCP X to brushless main.
|
|
|
|
|
|
|
|
|
|
|
Includes Walkera battery and receiver plugs installed. This is the higher current brother of the common XP-7A Ebay ESC. It works with 1-3s applications and it's used mostly on the brushless main motor conversion to start outrunner brushless motor easier.
|
|
This is commonly referred to as the Programmable Ebay ESC. It works with 1-2s applications and it's used mostly on the brushless main motor conversion. 3-pin receiver header connector is included. Motor & battery connectors are not included.
|
This is a special edition XP-7A-2 programmable ESC made to compatibility spec to both the outrunners/ inrunners w/Anti-cog outrunner firmware. Plug & play w/ Walkera connectors. It is ideal for upgrading to the lighter outrunner motors.
|
|
|
The complete solution- Includes $10 value of connector set- Battery,Futaba,3pin motor & Walkera Rx connectors.
|
The least expensive way to convert Walkera 4#3B & 4G3 to brushless. It uses your exiting RX2406/RX2605/RX2400 receiver to convert to brushless main. It's a plug and play. It is also programmable Ebay ESC w/converter.
|
The least expensive way to convert Novus FP, Walkera 4#3B & 4G3 to brushless. It uses your exiting RX2400/RX2406/RX2605 receiver to convert to brushless main. No soldering is required. CE701is a converter with a programmable Ebay ESC. Rx is not included.
|
|
|
|
HM-4G3-Z-40 (HM-4#6-Z-33) (HMXM3005)* Main Brushless Electronic Speed Controller for 4G3 & Novus CP is the same as HM-4#3B-Z-34 for 4#3B/A. This ESC is used only with a brushless main motor. For brushless tail motor please use a tail ESC (HM-4G3-Z-43).
|
|
HM-CB100-Z-26 Main ESC (Electroic Speed Controller) is used in conjunction with a brushless main motor. For brushless tail motor please use the Tail ESC (HM-CB100-Z-27).
|
|
HM-CB100-Z-27 (HM-4#3B-Z-38, HM-4G3-Z-43) Walkera Tail ESC/Converter: This Electronic Speed Controller also makes quick brushless tail signal conversions that is not provided by the brushless RX2406A/B or RX2400BL receivers with only BL main signals.
|
|
|
|
This is a high speed brushless converter with TheSteve chip build-into the PCB for easy Plug-N-Play. It is extremely easy to install and can convert any brush receiver signal to brushless and it will work and plug into most brushless ESC.
|
Price: This item is replaced by WWS-THESTEVE-HIGH
This is a low speed brushless converter with genuine TheSteve chip build-into the PCB for easy Plug-N-Play. It is extremely easy to install and can convert any brush receiver signal to brushless and it will work and plug into most brushless ESC.
|
|
|
|
|
|
|
|
|
|
This has been tested on the Walkera 4#3B main brushless motor conversion. At less than half the weight of an Ebay ESC, it ran cool during the entire flight. Thou, flight tests have been successful, we make no guarantees or claims that it will work for you
|
|
|
|
| | |