EE-FEIGAO-ESC-6A: Feigao BL 6A ESC FOR MAIN OR TAIL, 2-3S

Genuine Feigao 6A ESC. This BL ESC is one of the fastest ESC available in the market and it's ideal for applications that require faster responses such as the helicopter tail or smaller airplanes/cars. Feigao ESCs offer excellent compatibility to a wide variety of  brushless motors. Weight: 2.0g without wires, 4.7g w/wires Size: 29 x 12 x 6 mm / 1.14x0.47 x 0.23 in. Constant Current: 6A Max Current: 8A / 10 Sec. BEC: 0.8A TIMING: Low/Medium/High Input: 2-3 cell Li-Poly or 5-9 Ni-MH Low-Voltage Cutoff: 2.5V/2.75V/3.0V per cell Li-Poly 60%/65%/70% NiCd/NiMH Features includes: Programmable through transmitter or with the Feigao Speed Controller Programming Card (FG-ESCPC) Brake on/off Hard/soft cut-off 3 Li-Poly Auto-Cutoff voltages - 2.5V/2.75V/3.0V per cell Normal/Soft/Super-Soft startup Low/Medium/High timing Safe start requires throttle stick to be fully down in order to arm motor Alerts you when battery pack voltage is out of range or when throttle signal is out of range Auto throttle shutoff on loss of signal Thermal overload protection Failed startup protection - automatically cuts power if motor fails to start.

 

This ESC can be converted to 1 cell application however there is no technical support, warranty, guarantee or any type of service when you make this experimental conversion from 2 cell to 1 cell. To see the 2 to 1 cell conversion diagram, click MORE INFO, click VIEW MORE IMAGES then click NEXT on the top right corner of the screen. Please look at the conversion picture and the notes below. "If you're putting a resistor in parallel with R3 then you want 3K or as close to it as you can get. If you want to remove R3 and replace it then you want a 1.85K resistor. Either of these options will accomplish the same thing - the ESC will detect a 1S pack as 2S so it will arm and use a 1S low voltage cutoff. The Feigao has three different voltage cutoffs selectable during programming, they list the cutoff voltage per cell in the manual, that will be the cutoff voltage with the resistor mods above." complimentary notes from TheSteve.

 

SPECIFICATIONS:

CONT. CURRENT: 6A
BURST CURRENT: 8A
BEC MODE LINEAR: LINEAR
BEC OUTPUT: 5V/0.8A
BATTERY LIPO CELL: 2-3 cell
BATTERY NiMH CELL: 5-6
PROGRAMMABLE: YES- Optional programmer can be purchased
WEIGHT: 6g
SIZE (mm): 24x12x6