2mm Bullet Connector Set with Heatshrink- New high tensil strength springs

 

There are many grades of connectors- This one is made of high grade springs, It has been tested and approved by Wow Hobbies for reliable connection for RC devices. We have tried other types of connectors that loose spring tension only after a couple of insertions. This connector is rated for thousands of insertions and it's able to retain the same spring tension.

 

Bullet Connector Set (2mm) with color coded heatshrink tubing- Can be cut to required length for both male and female connector.

A must have for Gaui 330X-S. This package is for 1 set, order 4 sets for the 4 Gaui motors.

 

Note: After you have assembled your Gaui 330X-S. One of the first things is to test the motors. If you are using the original plugs on the ESCs and Motors you will see unreliable motor speed on all 4 motors. Some motor are going at a higher speed and some are going at a lower speed. First you think there is something wrong with some of the motors. Well, it took our experienced technician a while to figure out the problem. The original skinny connectors are simple too loose and do not offer proper contact surface and sometimes they just slip out. The only fix is to change the connector to these higher grade bullet (banana) connectors. 

Includes:
3 female bullet connectors (For the ESC)
3 male bullet connectors (For the Motor)
3 pieces of color coded heatshrink tubing- Can be cut to total of 6 pieces for both male and female connector.