450 / 400 Walkera Super Heavy Duty Turtle Shell Aluminum Case:Vertical Loading for T-rex 450, CopterX450, Walkera V450/V400/59DQ/HIKO 400.

The only case that fits the Lama 400/D/EC135 coaxial helicopters and 450 size helis. This is a cutom made Walkera aluminum case for Wow Hobbies customers. Your input enabled us to design a very durable and versatile case with slots for almost everything.

Features 20% more power than stock Align motor!

The CopterX 450 Electronic Kit has received rave reviews and is widely recognized as an outstanding value for both its peformance and reliability.

CopterX Gyro which has received rave reviews for providing excellent tail hold at maximum punch-out. Specification and performance is similar to the Futaba GY240 gyro but at a fraction of the cost.

Includes 4 long durable carbon fiber legs & clips for training purpose to prevent tipping over on take offs and landings. Clips in perfectly on all T-Rex 450/clones & all newer Walkera 180/200/400/450 5mm skid pipes. Helicopter in photo is not included.

Includes 4 long durable carbon fiber legs & clips for training purpose to prevent tipping over on take offs and landings. Clips in perfectly on all T-Rex 450/clones & all newer Walkera 180/200/400/450 5mm skid pipes. Helicopter in photo is not included.

You can effortlessly prolong battery life by frequently checking its voltage. Measuring 1-cell for Walkera/Novus and 3-6 cell for Trex450/600 helis, this one step plug & test meter is accurate and much easier to use than most cumbersome voltage meters.

This is a battery meter with built-in low voltage alarm can also be installed on board helicopters. At low voltages, a led will light up and the double buzzers will also sound a warning for pilots who are too far from the helicopter to prevent crashes.

This 2200mAh MG Power Battery provides the high 25C output required by Gaui 330X-S & Turbo Ace X830-S. For Walkera Lama3 you also need to get the "Deans to Walkera Round 3-cell Battery Adapter". Pls click "More Info". Dim: 102mm (L) * 33mm (W) * 24mm (H)

It's time to retire those old "AA" batteries. This is the smartest new solution to charge up your Walkera transmitter radio. No more guess work on 8 "AA" batteries with iffy connections in a tray. Everything is consolidated into one simple reliable unit.

The 4000 2S LiPo offers not only double the flight time as the stock DX8 battery but also advanced safety and features. It also includes a built in safety current that shuts the battery off, to avoid overcharging and damaging the battery and radio.

Customized to fit on Walkera transmitters, this Xtreme neck strap stabilizer bracket realigns the Tx to an optimum operating and viewing angle to ease arm, wrist & hand strain associated with holding and controlling the transmitter sticks simultaneously.

These buckles are designed with left hand thread at the marked end and right hand thread on the unmarked end so you can make adjustments without snapping off the linkages.

Premium quality carbon fiber tail rotor blades for top light weight performance and extra durability.

DX18 is a true milestone for RC pilots who operate models with a lot of functions or a lot of servos. It’s the RC world’s first hand-held transmitter with 18 fully-proportional channels. Until the DX18, the highest number of hand-held TX was 16.

The X-Plus 8 module is designed to allow expansion of up to 8 servos for non-control surface functions such as bomb drops, lights, winches, retractable landing gear, and many more

New generation radio with telemetry and vibration alarm which can be set to trigger on the lowest voltage or highest temperature you set. No receiver included in this package. Approved by Wow Hobbies with stringent test.

This fast full metal gear tail servo is absolutely the best value offering both speed & ultra durability (a lot less likely to strip). Wow has a special arrangement with Fusonic factory for large quantities used to replace Align T-Rex 450 tail servos.

This fast digital metal gear cyclic servo has higher speed than the MG-A-9G. With ultra durability, this is a fast and tough digital metal gear cyclic servo upgrade for your T-Rex 450.

This is a professional grade training gear with 4 sturdy foot-long legs which prevents tip-overs in take-off and landings. Features includes custom fitted clip-on mounting clips for 5mm diameter skids plus a center hub for easy installation and removal.

220V version- Please becareful not to order this item if you are located in USA. This is a standard balance charger for 2-cell (7.4V) & 3-cell (11.1V) LiPo batteries which includes a balancer for the battery & a power supply that plugs into a 220V socket.

This version 2 (WK-09-9) digital cyclic servo is much more durable than the original version 1(WK-09-8) digital cyclic servo. BOTH HITEC HS-5065MG & WALKERA HM-V450D01-Z-14-91 HAVE METAL GEARS WITH ONE PLASTIC GEAR MESHED WITH THE SERVO MOTOR PINION.

This set of 3 updated version 2 (WK-09-8) digital cyclic servos are much more durable than the original version 1 (WK-09-8) digital cyclic servos.

This is one of the best digital tail servo money can buy for the Trex 450 and compatibles. It has the same specification and performance as the Futaba S9257 at less than one third the cost. Click on More Info for detail and see video.

Due to recent production problem and defective rate. This charger has been replaced by the more reliable Walkera Charger. Click "More Info" for detail.

A full line of 450 and 500 scaled fuselage is available. Go to our 450 and 500 catagory to view them.

Besides advanced DSM2/DSMX technology and an impressive list of programming features, DX7s boasts the finest ergonomics in its class. Its balanced weight, silky smooth quad-bearing gimbals and rubber grips provide a sense of comfort and precision.

The X-Plus 8 module is designed to allow expansion of up to 8 servos for non-control surface functions such as bomb drops, lights, winches, retractable landing gear, and many more

Recognized as the leading 450 class CP helicopter, the Align T-Rex 450 Sport is geared to take you on an expedition. Limited booking is available from this fresh new shipment. All you need to complete your heicopter is the receiver, transmitter & battery.

New style CNC alloy rotor head system dramatically improve aesthetics. The new rotor head also improves flight stability and maneuverability.